scholarly journals New flow boiling heat transfer correlation for CFC-114 and C{sub 4}F{sub 10}

1995 ◽  
Author(s):  
A.J. Szady
Author(s):  
Wenzhi Cui ◽  
Longjian Li ◽  
Mingdao Xin ◽  
Tien-Chien Jen ◽  
Qinghua Chen ◽  
...  

In the research of intube flow boiling, a widely accepted factor is that there are two main mechanisms participating in the heat transfer. One is nucleate boiling, which is dependent on the presence of active nuclei on the heated wall and the heat transfer coefficient is much influenced by the heat flux, much similar to pool boiling. In the other heat transfer mode, the boiling nuclei are fully suppressed and heat is transferred by the liquid evaporation through the interface of liquid film and vapor core. This is also called forced convective evaporation or convective boiling. In the evaporation region, the dependence of heat transfer on heat flux is not distinct and governed mainly by the mass flux and vapor quality. In the open literature on convective boiling heat transfer of refrigerant researches have been extensively conducted in straight tube. The studies, however, on two-phase flow boiling heat transfer in helically coiled tube are far less than that in straight tube. Because of the high efficiency in heat transfer and compactness in volume, helically coiled tubes are used extensively in practical industries. Therefore, it is important for application to obtain the correlations of flow boiling heat transfer coefficient in helically coiled tube. A new kind of micro-finned helically coiled tube was developed by the present authors and the flow boiling heat transfer characteristics are experimental studied in this paper, using R134a, an environment-friendly refrigerant as experimental fluid. By introducing convective boiling number NCB, as suggested by V. V. Klimenko (in Ref. [8]), the transition boundary between nucleate boiling and forced convective boiling in helically coiled tube is examined, which is much different with that in straight tube. Based on the analysis of the mechanisms of flow boiling, heat transfer correlation of the specific micro-finned helically coiled tubes is obtained, which has a mean absolute deviation of 13.8%.


Author(s):  
Chong Chen ◽  
Puzhen Gao

In view of the practical significance of a correlation of heat transfer coefficient in the aspect of such applications as engineering and predictive, some efforts towards correlating flow boiling heat transfer correlation for vertical rectangular narrow channels have been made in this paper. Based on analyses of existing general correlations for flow boiling heat transfer, it is found that general correlations are not suitable to predict heat transfer coefficients in narrow channels. By considering the suppression factor S and two-phase pool boiling heat transfer coefficient hnb, introducing boiling number Bo and two-phase friction multiplier ϕtt2, the Chen correlation has been modified to be used for narrow channels. The flow boiling heat transfer was the function of boiling number Bo and two-phase friction multiplier ϕtt2, the coefficients have a regular change with the increase of boiling number Bo or two-phase friction multiplier ϕtt2. A comparison of the newly developed correlation with the existing data for narrow channels shows a satisfactory agreement. The heat transfer coefficient of the narrow channel was well predicted by the new correlation and the deviation within ±20%.


Sign in / Sign up

Export Citation Format

Share Document