Fusion reactor materials will be damaged by an intense field of energetic neutrons. There is no neutron source of sufficient intensity at these energies available at present, so the material properties are being correlated with those obtained in irradiation with other irradiation sorces. Irradiation with 600 MeV protons produces both displacement damage and impurities due to nuclear reactions. Helium and hydrogen are produced as gaseous impurities. Other metallic impurities are also created . The main elements of the microstructure observed after irradiation in the PIREX facility, are described in the following paragraphs.A. Defect clusters at low irradiation doses: In specimens irradiated to very low doses (1021-1024 protons.m-2), so that there is no superimposition of contrast, small defect clusters have been observed by the weak beam technique. Detailed analysis of the visible contrast (>0.5 nm diameter) revealed the presence of stacking fault tetrahedra, dislocation loops and a certain number of unidentified clusters . Typical results in Cu and Au are shown in Fig. 1.
Imaging of Calibrated Defects in Additively Manufactured Materials: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components
