scholarly journals Thermo-Mechanical Processing Parameters for Rhondite Steels

1999 ◽  
Author(s):  
Gail Mackiewicz-Ludtka ◽  
V Sikka ◽  
M Santella ◽  
L Walker ◽  
R Nanstad ◽  
...  
Keyword(s):  
Processing Parameters ◽  
Mechanical Processing

The Effect of Thermo-Mechanical Processing on the Properties of some Al-Fe-Si Alloys with High Fe/Si Ratio

2007 ◽  
Vol 555 ◽  
pp. 559-563 ◽  
Author(s):  
Kemal Delijić ◽  
V. Asanović ◽  
Dragan Radonjić
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchangers ◽  
Food Industry ◽  
Plastic Anisotropy ◽  
Processing Parameters ◽  
Mechanical Processing ◽  
Annealing Conditions ◽  
Cast Alloys ◽  
Twin Roll Cast ◽  
Twin Roll

The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si≈6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.

Simulation and Mechanical Processing of Micron Wood Flake for a New Environment-Friendly Decorative Board

2010 ◽  
Vol 113-116 ◽  
pp. 1555-1559
Author(s):  
Alun ◽  
Yan Ma ◽  
Yi Xing Liu ◽  
Hai Peng Yu
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Processing Parameters ◽  
The Other ◽  
Mechanical Processing ◽  
Environment Pollution ◽  
Waste Wood ◽  
Environment Friendly ◽  
Processing Theory ◽  
Large Size

In this paper, we focus on a new wood-based panel unit, which was named Micron Wood Flake for its large size in length, a very small size in thickness, and especially its wooden color in appearance. The flakes were obtained by mechanical processing on waste wood based on the micro-processing theory and technique. In order to design the device and determine the key processing parameters, a simulation of micron wood flake was proceeded based on a mathematical model of single wood cell proposed here. Comparing with the experiments results, it showed that the model is feasibility to some extent. In contrast to the other methods of disposing waste woods, the method proposed here is no environment pollution absolutely, consequently, as an application of this kind flakes, a new environment-friendly decorative board was developed, and the physical and mechanical properties of the samples reaches Japanese light particleboard standard JISA5908.

Sign in / Sign up

Export Citation Format

Share Document