Research of Viscosity of Calcium Carbonate Filled Polypropylene in Dynamic Extrusion

A novel rheological measuring apparatus was designed, which introduced an additional sinusoidal vibration in parallel on the extruding direction of polymer melt in this paper. Melt rheology of polypropylene filled CaCO3 particles in various amounts of filler (i.e. with 3 and 20 wt%) during capillary melt-extrusion were investigated respectively. The effects of vibration parameters on rheological behaviors were studied. Compared with the steady extrusion, the apparent viscosity of filled system decreased remarkably with the increase of vibration frequency and amplitude. The apparent viscosity reached to the minimum value as vibration frequency was about 8 Hz. When the filled percentage of CaCO3 was low, the response of apparent viscosity will be more distinct with the increasing vibration parameters.

Download Full-text

A TEM study of the microstructure of avian eggshells

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100130146 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1102-1103

Author(s):

S. Q. Xiao ◽

S. Baden ◽

A. H. Heuer

Keyword(s):

Electron Microscope ◽

Calcium Carbonate ◽

Nucleation And Growth ◽

Growth Mechanisms ◽

Shell Surface ◽

Thin Sections ◽

Polycrystalline Metals ◽

Transmission Electron ◽

Nucleation And Growth Mechanisms

The avian eggshell is one of the most rapidly mineralizing biological systems known. In situ, 5g of calcium carbonate are crystallized in less than 20 hrs to fabricate the shell. Although there have been much work about the formation of eggshells, controversy about the nucleation and growth mechanisms of the calcite crystals, and their texture in the eggshell, still remain unclear. In this report the microstructure and microchemistry of avian eggshells have been analyzed using transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS).Fresh white and dry brown eggshells were broken and fixed in Karnosky's fixative (kaltitanden) for 2 hrs, then rinsed in distilled H2O. Small speckles of the eggshells were embedded in Spurr medium and thin sections were made ultramicrotome.The crystalline part of eggshells are composed of many small plate-like calcite grains, whose plate normals are approximately parallel to the shell surface. The sizes of the grains are about 0.3×0.3×1 μm3 (Fig.l). These grains are not as closely packed as man-made polycrystalline metals and ceramics, and small gaps between adjacent grains are visible indicating the absence of conventional grain boundaries.

Download Full-text

Influence of foreign salts to the CaCO3-CO2-H2O system and antiscalants on the adherence of calcium carbonate on the stainless steel

European journal of water quality ◽

10.1051/water/2010005 ◽

2010 ◽

Vol 41 (1) ◽

pp. 51-66 ◽

Cited By ~ 3

Author(s):

Ilhem Ben Salah ◽

Mohamed Mouldi Tlili ◽

Mohamed Ben Amor

Keyword(s):

Stainless Steel ◽

Calcium Carbonate

Download Full-text

Scaling risk assessment in a closed circuit recycled board mill by speciation methods

TAPPI Journal ◽

10.32964/tj11.5.53 ◽

2012 ◽

Vol 11 (5) ◽

pp. 53-61 ◽

Cited By ~ 4

Author(s):

PATRICK HUBER ◽

SYLVIE NIVELON ◽

PATRICE NORTIER

Keyword(s):

Calcium Carbonate ◽

Volatile Fatty Acids ◽

Inorganic Carbon ◽

Stability Index ◽

Closed Circuit ◽

Critical Problem ◽

Local Scaling ◽

Water Analyses ◽

Closed Water ◽

Speciation Calculation

Calcium carbonate scaling often is a critical problem for recycled board mills that have closed water circuits. The objective of this study was to determine local scaling risks throughout the production process. To predict scaling potential, we calculated several saturation indexes, based on speciation determined from detailed water analyses. Calculated scaling trends are in accordance with observed dissolution and precipitation of calcium carbonate in the process, when considering local aeration phenomena. The importance of volatile fatty acids (resulting from anaerobic bacterial activity) in calco-carbonic equilibriums is discussed, and taken into account in the speciation calculation. We also demonstrate the need to measure inorganic carbon instead of alkalinity in such conditions. This makes typical scaling indexes, such as the Ryznar Stability Index, irrelevant to predict scaling risk in closed circuit conditions; thus, it is necessary to use general speciation methods, as described in this paper.

Download Full-text

A method for measuring the in-plane compressive strength and the compression behavior of coating layers

TAPPI Journal ◽

10.32964/tj10.7.29 ◽

2011 ◽

Vol 10 (7) ◽

pp. 29-34

Author(s):

TEEMU PUHAKKA ◽

ISKO KAJANTO ◽

NINA PYKÄLÄINEN

Keyword(s):

Tensile Strength ◽

Compressive Strength ◽

Calcium Carbonate ◽

Coating Layer ◽

Test Methods ◽

Coating Films ◽

Precipitated Calcium Carbonate ◽

Coating Color ◽

Mineral Coatings ◽

Styrene Butadiene

Cracking at the fold is a quality defect sometimes observed in coated paper and board. Although tensile and compressive stresses occur during folding, test methods to measure the compressive strength of a coating have not been available. Our objective was to develop a method to measure the compressive strength of a coating layer and to investigate how different mineral coatings behave under compression. We used the short-span compressive strength test (SCT) to measure the in-plane compressive strength of a free coating layer. Unsupported free coating films were prepared for the measurements. Results indicate that the SCT method was suitable for measuring the in-plane compressive strength of a coating layer. Coating color formulations containing different kaolin and calcium carbonate minerals were used to study the effect of pigment particles’ shape on the compressive and tensile strengths of coatings. Latices having two different glass transition temperatures were used. Results showed that pigment particle shape influenced the strength of a coating layer. Platy clay gave better strength than spherical or needle-shaped carbonate pigments. Compressive and tensile strength decreased as a function of the amount of calcium carbonate in the coating color, particularly with precipitated calcium carbonate. We also assessed the influence of styrene-butadiene binder on the compressive strength of the coating layer, which increased with the binder level. The compressive strength of the coating layer was about three times the tensile strength.

Download Full-text

The solubility of calcium carbonate in green liquor handling systems

TAPPI Journal ◽

10.32964/tj18.10.595 ◽

2019 ◽

Vol 18 (10) ◽

pp. 595-602

Author(s):

ALISHA GIGLIO ◽

VLADIMIROS G. PAPANGELAKIS ◽

HONGHI TRAN

Keyword(s):

Calcium Carbonate ◽

Systematic Study ◽

Kraft Pulp ◽

Thermodynamic Simulation ◽

Solubility Data ◽

Pulp Mills ◽

Persistent Problem ◽

Green Liquor ◽

Kraft Pulp Mills ◽

Salt Systems

The formation of hard calcite (CaCO3) scale in green liquor handling systems is a persistent problem in many kraft pulp mills. CaCO3 precipitates when its concentration in the green liquor exceeds its solubility. While the solubility of CaCO3 in water is well known, it is not so in the highly alkaline green liquor environment. A systematic study was conducted to determine the solubility of CaCO3 in green liquor as a function of temperature, total titratable alkali (TTA), causticity, and sulfidity. The results show that the solubility increases with increased temperature, increased TTA, decreased causticity, and decreased sulfidity. The new solubility data was incorporated into OLI (a thermodynamic simulation program for aqueous salt systems) to generate a series of CaCO3 solubility curves for various green liquor conditions. The results help explain how calcite scale forms in green liquor handling systems.

Download Full-text