Suitable Conditions for Effective Inter Chip Communication based on Surface Wave Phenomenon

2021 ◽  
Vol 14 ◽  
Author(s):  
Mahaveer Penna ◽  
Shiva Shankar ◽  
Keshava Murthy ◽  
Jijesh J J
Keyword(s):  
Surface Wave ◽  
Integrated Circuits ◽  
Electromagnetic Waves ◽  
Printed Circuit Boards ◽  
Analytical Models ◽  
Circuit Boards ◽  
High Frequencies ◽  
Printed Circuit ◽  
High Data ◽  
Low Dispersion

Background: The communication between two Integrated Circuits (IC) of the Printed Circuit Boards (PCB) currently happening through copper traces which allow electric charge to flow. Several limitations being encountered with the copper traces during high data rate communication because of the resistivity factors, which eventually leads to the damage of traces and the system. Methods: The solution for this issue comes with the design of surface wave communication-based waveguide/channel between the IC’s. Surface wave communication over a specified communication fabric/channel performs the propagation of electromagnetic waves effectively even at high frequencies compared to the copper traces using conductor-dielectric combination. This paper deals in revealing suitable conditions through profound analytical models for achieving effective surface wave communication between the pins of integrated circuits. Results: The analysis includes defining the possible wave propagation terms, suitable channel design aspects for PCB application and corresponding analysis for effective communication at frequencies from 50GHz to 500GHz of millimeter range. This study provides the roadmap to explore a deterministic channel/fabric for pin to pin communication between the IC’s as an alternate for the copper traces. Conclusion: In this process, the proposed channel achieves low dispersion compared to the copper traces at millimeter frequency range.

scholarly journals High-Density Interconnect Technology Assessment of Printed Circuit Boards for Space Applications

2020 ◽  
Vol 17 (3) ◽  
pp. 79-88
Author(s):  
Maarten Cauwe ◽  
Bart Vandevelde ◽  
Chinmay Nawghane ◽  
Marnix Van De Slyeke ◽  
Erwin Bosman ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Printed Circuit Boards ◽  
Digital Signal ◽  
High Density ◽  
Circuit Boards ◽  
Space Applications ◽  
Track Width ◽  
Printed Circuit ◽  
Field Programmable ◽  
Space Projects

Abstract High-density interconnect (HDI) printed circuit boards (PCBs) and associated assemblies are essential to allow space projects to benefit from the ever increasing complexity and functionality of modern integrated circuits such as field-programmable gate arrays, digital signal processors and application processors. Increasing demands for functionality translate into higher signal speeds combined with an increasing number of input/outputs (I/Os). To limit the overall package size, the contact pad pitch of the components is reduced. The combination of a high number of I/Os with a reduced pitch places additional demands onto the PCB, requiring the use of laser-drilled microvias, high-aspect ratio core vias, and small track width and spacing. Although the associated advanced manufacturing processes have been widely used in commercial, automotive, medical, and military applications, reconciling these advancements in capability with the reliability requirements for space remains a challenge. Two categories of the HDI technology are considered: two levels of staggered microvias (basic HDI) and (up to) three levels of stacked microvias (complex HDI). In this article, the qualification of the basic HDI technology in accordance with ECSS-Q-ST-70-60C is described. At 1.0-mm pitch, the technology passes all testing successfully. At .8-mm pitch, failures are encountered during interconnection stress testing and conductive anodic filament testing. These failures provide the basis for updating the design rules for HDI PCBs.

scholarly journals A tool for errors detection in printed circuit boards production

2009 ◽  
Vol 7 (01) ◽  
Author(s):  
A. De Luca Pennacchia ◽  
L. G. De la Fraga ◽  
U. Martí­nez Hernández
Keyword(s):  
Image Processing ◽  
Integrated Circuits ◽  
Digital Image Processing ◽  
Digital Image ◽  
Printed Circuit Boards ◽  
Software Tool ◽  
Reference Points ◽  
Surface Mount Technology ◽  
Circuit Boards ◽  
Printed Circuit

The progressive implementation of software functions in Integrated Circuits (ICs) has considerably increased the number of transistors and pin connections of ICs. For that reason, Printed Circuit Boards (PCBs) are fabricated with the Surface Mount Technology (SMT) nowadays and IC mounting on PCB is a crucial process that requires high precision. An Automatic Mechanical Montage (AMM) system is used to mount ICs on the sockets using a couple of reference points for every IC in order to find the correct positions for mounting the IC. Due to some factors in the process of PCB development, there are differences between designed and manufactured PCBs, which could generate delays in their production. In this work, a software tool which allows to work with digital images of PCBs is described. This tool finds the differences generated in PCB development, especially the differences in IC reference points using Digital Image Processing (DIP) techniques.

Sign in / Sign up

Export Citation Format

Share Document