scholarly journals High resolution simulations of a tornadic storm affecting Sydney

2021 ◽  
Vol 62 ◽  
Author(s):  
Joshua Hartigan ◽  
Shev MacNamara ◽  
Lance Leslie ◽  
Milton Speer
Keyword(s):  
Wrf Model ◽  
Cloud Microphysics ◽  
Squall Line ◽  
Weather Research And Forecasting ◽  
Cold Pool ◽  
Microphysics Scheme ◽  
Severe Storms ◽  
Severe Thunderstorms ◽  
Sydney Australia ◽  
Weather Research

On 16 December 2015 a severe thunderstorm and associated tornado affected Sydney causing widespread damage and insured losses of $206 million. Severe impacts occurred in Kurnell, requiring repairs to Sydney's desalination plant which supplies up to 15% of Sydney water during drought, with repairs only completed at the end of 2018. Climatologically, this storm was unusual as it occurred during the morning and had developed over the ocean, rather than developing inland during the afternoon as is the case for many severe storms impacting the Sydney region. Simulations of the Kurnell storm were conducted using the Weather Research and Forecasting (WRF) model on a double nested domain using the Morrison microphysics scheme and the NSSL 2-moment 4-ice microphysics scheme. Both simulations produced severe storms that followed paths similar to the observed storm. However, the storm produced under the Morrison scheme did not have the same morphology as the observed storm. Meanwhile, the storm simulated with the NSSL scheme displayed cyclical low- and mid-level mesocyclone development, which was observed in the Kurnell storm, highlighting that the atmosphere supported the development of severe rotating thunderstorms with the potential for tornadogenesis. The NSSL storm also produced severe hail and surface winds, similar to observations. The ability of WRF to simulate general convective characteristics and a storm similar to that observed displays the applicability of this model to study the causes of severe high-impact Australian thunderstorms. References J. T. Allen and E. R. Allen. A review of severe thunderstorms in Australia. Atmos. Res., 178:347–366, 2016. doi:10.1016/j.atmosres.2016.03.011. Bureau of Meteorology. Severe Storms Archive, 2020. URL http://www.bom.gov.au/australia/stormarchive/. D. T. Dawson II, M. Xue, J. A. Milbrandt, and M. K. Yau. Comparison of evaporation and cold pool development between single-moment and multimoment bulk microphysics schemes in idealized simulations of tornadic thunderstorms. Month. Wea. Rev., 138:1152–1171, 2010. doi:10.1175/2009MWR2956.1. H. Hersbach, B. Bell, P. Berrisford, S. Hirahara, A. Horanyi, J. Munoz-Sabater, J. Nicolas, C. Peubey, R. Radu, D. Schepers, et al. The ERA5 global reanalysis. Quart. J. Roy. Meteor. Soc., 146:1999–2049, 2020. doi:10.1002/qj.3803. Insurance Council of Australia. Victorian bushfire losses push summer catastrophe bill past $550m, 2016. E. R. Mansell, C. L. Ziegler, and E. C. Bruning. Simulated electrification of a small thunderstorm with two-moment bulk microphysics. J. Atmos. Sci., 67:171–194, 2010. doi:10.1175/2009JAS2965.1. R. C. Miller. Notes on analysis and severe-storm forecasting procedures of the Air Force Global Weather Central, volume 200. Air Weather Service, 1972. URL https://apps.dtic.mil/sti/citations/AD0744042. H. Morrison, J. A. Curry, and V. I. Khvorostyanov. A new double-moment microphysics parameterization for application in cloud and climate models. Part I: Description. J. Atmos. Sci., 62:1665–1677, 2005. doi:10.1175/JAS3446.1. H. Morrison, G. Thompson, and V. Tatarskii. Impact of cloud microphysics on the development of trailing stratiform precipitation in a simulated squall line: Comparison of one- and two-moment schemes. Month. Wea. Rev., 137:991–1007, 2009. doi:10.1175/2008MWR2556.1. J. G. Powers, J. B. Klemp, W. C. Skamarock, C. A. Davis, J. Dudhia, D. O. Gill, J. L. Coen, D. J. Gochis, R. Ahmadov, S. E. Peckham, et al. The Weather Research and Forecasting Model: Overview, system efforts, and future directions. Bull. Am. Meteor. Soc., 98:1717–1737, 2017. doi:10.1175/BAMS-D-15-00308.1. H. Richter, A. Protat, J. Taylor, and J. Soderholm. Doppler radar and storm environment observations of a maritime tornadic supercell in Sydney, Australia. In Preprints, 28th Conf. on Severe Local Storms, Portland OR, Amer. Meteor. Soc. P, 2016. W. C. Skamarock, J. B. Klemp, J. Dudhia, D. O. Gill, Z. Liu, J. Berner, W. Wang, J. G. Powers, M. G. Duda, D. Barker, and X.-Y. Huang. A description of the advanced research WRF Model version 4. Technical report, 2019. Storm Prediction Center. The Enhanced Fujita Scale (EF Scale), 2014. URL https://www.spc.noaa.gov/efscale/. R. A. Warren, H. A. Ramsay, S. T. Siems, M. J. Manton, J. R. Peter, A. Protat, and A. Pillalamarri. Radar-based climatology of damaging hailstorms in Brisbane and Sydney, Australia. Quart. J. Roy. Meteor. Soc., 146:505–530, 2020. doi:10.1002/qj.3693.

scholarly journals Intel Xeon Phi accelerated Weather Research and Forecasting (WRF) Goddard microphysics scheme

2014 ◽  
Vol 7 (6) ◽  
pp. 8941-8973 ◽  
Author(s):  
J. Mielikainen ◽  
B. Huang ◽  
A. H.-L. Huang
Keyword(s):  
Wrf Model ◽  
Cloud Microphysics ◽  
Optimization Techniques ◽  
Weather Research And Forecasting ◽  
Xeon Phi ◽  
Microphysics Scheme ◽  
Improved Performance ◽  
Intel Mic ◽  
Intel Xeon ◽  
Weather Research

Abstract. The Weather Research and Forecasting (WRF) model is a numerical weather prediction system designed to serve both atmospheric research and operational forecasting needs. The WRF development is a done in collaboration around the globe. Furthermore, the WRF is used by academic atmospheric scientists, weather forecasters at the operational centers and so on. The WRF contains several physics components. The most time consuming one is the microphysics. One microphysics scheme is the Goddard cloud microphysics scheme. It is a sophisticated cloud microphysics scheme in the Weather Research and Forecasting (WRF) model. The Goddard microphysics scheme is very suitable for massively parallel computation as there are no interactions among horizontal grid points. Compared to the earlier microphysics schemes, the Goddard scheme incorporates a large number of improvements. Thus, we have optimized the Goddard scheme code. In this paper, we present our results of optimizing the Goddard microphysics scheme on Intel Many Integrated Core Architecture (MIC) hardware. The Intel Xeon Phi coprocessor is the first product based on Intel MIC architecture, and it consists of up to 61 cores connected by a high performance on-die bidirectional interconnect. The Intel MIC is capable of executing a full operating system and entire programs rather than just kernels as the GPU does. The MIC coprocessor supports all important Intel development tools. Thus, the development environment is one familiar to a vast number of CPU developers. Although, getting a maximum performance out of MICs will require using some novel optimization techniques. Those optimization techniques are discussed in this paper. The results show that the optimizations improved performance of Goddard microphysics scheme on Xeon Phi 7120P by a factor of 4.7×. In addition, the optimizations reduced the Goddard microphysics scheme's share of the total WRF processing time from 20.0 to 7.5%. Furthermore, the same optimizations improved performance on Intel Xeon E5-2670 by a factor of 2.8× compared to the original code.

scholarly journals Simulation of Severe Thunderstorms in Conjugation of Westerly and Easterly on 31 March 2019 in Bangladesh

2022 ◽  
Vol 12 (3) ◽  
pp. 29-43
Author(s):  
Samarendra Karmakar ◽  
Mohan Kumar Das ◽  
Md Quamrul Hassam ◽  
Md Abdul Mannan
Keyword(s):  
South Asian ◽  
Wrf Model ◽  
Horizontal Resolution ◽  
Weather Research And Forecasting ◽  
Atmospheric Conditions ◽  
Microphysics Scheme ◽  
Severe Thunderstorms ◽  
Synoptic Conditions ◽  
Pbl Scheme ◽  
Single Moment

The diagnostic and prognostic studies of thunderstorms/squalls are very important to save live and loss of properties. The present study aims at diagnose the different tropospheric parameters, instability and synoptic conditions associated the severe thunderstorms with squalls, which occurred at different places in Bangladesh on 31 March 2019. For prognostic purposes, the severe thunderstorms occurred on 31 March 2019 have been numerically simulated. In this regard, the Weather Research and Forecasting (WRF) model is used to predict different atmospheric conditions associated with the severe storms. The study domain is selected for 9 km horizontal resolution, which almost covers the south Asian region. Numerical experiments have been conducted with the combination of WRF single-moment 6 class (WSM6) microphysics scheme with Yonsei University (YSU) PBL scheme in simulation of the squall events. Model simulated results are compared with the available observations. The observed values of CAPE at Kolkata both at 0000 and 1200 UTC were 2680.4 and 3039.9 J kg-1 respectively on 31 March 2019 and are found to be comparable with the simulated values. The area averaged actual rainfall for 24 hrs is found is 22.4 mm, which complies with the simulated rainfall of 20-25 mm for 24 hrs. Journal of Engineering Science 12(3), 2021, 29-43

scholarly journals Extreme Rainfall Forecast with the WRF-ARW Model in the Central Andes of Peru

Atmosphere ◽  
2018 ◽  
Vol 9 (9) ◽  
pp. 362 ◽  
Author(s):  
Aldo Moya-Álvarez ◽  
José Gálvez ◽  
Andrea Holguín ◽  
René Estevan ◽  
Shailendra Kumar ◽  
...  
Keyword(s):  
Extreme Event ◽  
Wrf Model ◽  
Extreme Rainfall ◽  
Central Andes ◽  
Weather Research And Forecasting ◽  
Mountain Range ◽  
Microphysics Scheme ◽  
Vertical Movements ◽  
Synoptic Conditions ◽  
Weather Research

The ability of the WRF-ARW (Weather Research and Forecasting-Advanced Research WRF) model to forecast extreme rainfall in the Central Andes of Peru is evaluated in this study, using observations from stations located in the Mantaro basin and GOES (Geostationary Operational Environmental Satellite) images. The evaluation analyzes the synoptic conditions averaged over 40 extreme event cases, and considers model simulations organized in 4 nested domains. We first establish that atypical events in the region are those with more than 27 mm of rainfall per day when averaging over all the stations. More than 50% of the selected cases occurred during January, February, and April, with the most extreme occurring during February. The average synoptic conditions show negative geopotential anomalies and positive humidity anomalies in 700 and 500 hPa. At 200 hPa, the subtropical upper ridge or “Bolivian high” was present, with its northern divergent flank over the Mantaro basin. Simulation results show that the Weather Research and Forecasting (WRF) model underestimates rainfall totals in approximately 50–60% of cases, mainly in the south of the basin and in the extreme west along the mountain range. The analysis of two case studies shows that the underestimation by the model is probably due to three reasons: inability to generate convection in the upstream Amazon during early morning hours, apparently related to processes of larger scales; limitations on describing mesoscale processes that lead to vertical movements capable of producing extreme rainfall; and limitations on the microphysics scheme to generate heavy rainfall.

scholarly journals Evaluation of Weather Research and Forecasting (WRF) Microphysics single moment class-3 and class-6 in Precipitation Forecast

2018 ◽  
Vol 150 ◽  
pp. 03007 ◽  
Author(s):  
Syeda Maria Zaidi ◽  
Jacqueline Isabella Anak Gisen
Keyword(s):  
Model Performance ◽  
Wrf Model ◽  
Precipitation Forecast ◽  
Weather Research And Forecasting ◽  
Microphysics Scheme ◽  
Maximum Rainfall ◽  
Rainfall Events ◽  
Single Moment ◽  
Minimum Medium ◽  
Weather Research

In this study, the performance of two different Microphysics Scheme options in Weather Research and Forecasting (WRF) model were evaluated for the estimating the precipitation forecast. The schemes WRF single moment class-3 (WSM-3) and single moment class-6 (WSM-6) were employed to produce the minimum, medium and maximum precipitation for the selected events over the Kuantan River Basin (KRB). The obtained simulated results were compared with the observed data from eight different rainfall gauging stations. The results comparison indicate that WRF model provides better forecasting at some rainfall stations for minimum and medium rainfall events but did not produce good result during maximum rainfall overall. The WSM-6 scheme is found to produce better result compared to WSM-3. The study also found that to acquire accurate precipitation results, it is also required to test some other physics scheme parameterization to enhance the model performance.

scholarly journals Optimal Physics Parameterization Scheme Combination of the Weather Research and Forecasting Model for Seasonal Precipitation Simulation over Ghana

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Richard Yao Kuma Agyeman ◽  
Thompson Annor ◽  
Benjamin Lamptey ◽  
Emmanuel Quansah ◽  
Jacob Agyekum ◽  
...  
Keyword(s):  
Wrf Model ◽  
Mean Value ◽  
Weather Research And Forecasting ◽  
Seasonal Precipitation ◽  
Data Simulation ◽  
Microphysics Scheme ◽  
Precipitation Simulation ◽  
Outer Domain ◽  
Effects Of Drought ◽  
Weather Research

Seasonal predictions of precipitation, among others, are important to help mitigate the effects of drought and floods on agriculture, hydropower generation, disasters, and many more. This work seeks to obtain a suitable combination of physics schemes of the Weather Research and Forecasting (WRF) model for seasonal precipitation simulation over Ghana. Using the ERA-Interim reanalysis as forcing data, simulation experiments spanning eight months (from April to November) were performed for two different years: a dry year (2001) and a wet year (2008). A double nested approach was used with the outer domain at 50 km resolution covering West Africa and the inner domain covering Ghana at 10 km resolution. The results suggest that the WRF model generally overestimated the observed precipitation by a mean value between 3% and 64% for both years. Most of the scheme combinations overestimated (underestimated) precipitation over coastal (northern) zones of Ghana for both years but estimated precipitation reasonably well over forest and transitional zones. On the whole, the combination of WRF Single-Moment 6-Class Microphysics Scheme, Grell-Devenyi Ensemble Cumulus Scheme, and Asymmetric Convective Model Planetary Boundary Layer Scheme simulated the best temporal pattern and temporal variability with the least relative bias for both years and therefore is recommended for Ghana.

scholarly journals Numerical Simulations of Airborne Glaciogenic Cloud Seeding Using the WRF Model with the Modified Morrison Scheme over the Pyeongchang Region in the Winter of 2016

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Sanghee Chae ◽  
Ki-Ho Chang ◽  
Seongkyu Seo ◽  
Jin-Yim Jeong ◽  
Baek-Jo Kim ◽  
...  
Keyword(s):  
Wrf Model ◽  
Weather Conditions ◽  
Cloud Microphysics ◽  
Cloud Water ◽  
Weather Research And Forecasting ◽  
Cloud Seeding ◽  
Wind Fields ◽  
Liquid Water Path ◽  
Microphysics Scheme ◽  
Simulated Precipitation

A model was developed for simulating the effects of airborne silver iodide (AgI) glaciogenic cloud seeding using the weather research and forecasting (WRF) model with a modified Morrison cloud microphysics scheme. This model was used to hindcast the weather conditions and effects of seeding for three airborne seeding experiments conducted in 2016. The spatial patterns of the simulated precipitation and liquid water path (LWP) qualitatively agreed with the observations. Considering the observed wind fields during the seeding, the simulated spatiotemporal distributions of the seeding materials, AgI, and snowfall enhancements were found to be reasonable. In the enhanced snowfall cases, the process by which cloud water and vapor were converted into ice particles after seeding was also reasonable. It was also noted that the AgI residence time (>1 hr) above the optimum AgI concentration (105 m−3) and high LWP (>100 g m−2) were important factors for snowfall enhancements. In the first experiment, timing of the simulated snowfall enhancement agreed with the observations, which supports the notion that the seeding of AgI resulted in enhanced snowfall in the experiment. The model developed in this study will be useful for verifying the effects of cloud seeding on precipitation.

Parameterization of Cloud Microphysics Based on the Prediction of Bulk Ice Particle Properties. Part II: Case Study Comparisons with Observations and Other Schemes

2015 ◽  
Vol 72 (1) ◽  
pp. 312-339 ◽  
Author(s):  
Hugh Morrison ◽  
Jason A. Milbrandt ◽  
George H. Bryan ◽  
Kyoko Ikeda ◽  
Sarah A. Tessendorf ◽  
...  
Keyword(s):  
Traditional Approach ◽  
Computational Cost ◽  
Wrf Model ◽  
Leading Edge ◽  
Cloud Microphysics ◽  
Squall Line ◽  
Orographic Precipitation ◽  
Microphysics Scheme ◽  
Particle Properties ◽  
Ice Phase

Abstract A new microphysics scheme has been developed based on the prediction of bulk particle properties for a single ice-phase category, in contrast to the traditional approach of separating ice into various predefined species (e.g., cloud ice, snow, and graupel). In this paper, the new predicted particle properties (P3) scheme, described in Part I of this series, is tested in three-dimensional simulations using the Weather Research and Forecasting (WRF) Model for two contrasting well-observed cases: a midlatitude squall line and winter orographic precipitation. Results are also compared with simulations using other schemes in WRF. Simulations with P3 can produce a wide variety of particle characteristics despite having only one free ice-phase category. For the squall line, it produces dense, fast-falling, hail-like ice near convective updraft cores and lower-density, slower-falling ice elsewhere. Sensitivity tests show that this is critical for simulating high precipitation rates observed along the leading edge of the storm. In contrast, schemes that represent rimed ice as graupel, with lower fall speeds than hail, produce lower peak precipitation rates and wider, less distinct, and less realistic regions of high convective reflectivity. For the orographic precipitation case, P3 produces areas of relatively fast-falling ice with characteristics of rimed snow and low- to medium-density graupel on the windward slope. This leads to less precipitation on leeward slopes and more on windward slopes compared to the other schemes that produce large amounts of snow relative to graupel (with generally the opposite for schemes with significant graupel relative to snow). Overall, the new scheme produces reasonable results for a reduced computational cost.

Sign in / Sign up

Export Citation Format

Share Document