scholarly journals Wave Propagation Analysis for Layered Solid-Fluid Media in a Gravity Field Using a Thin-Layered Element and Discrete Wave Number Method.

1996 ◽  
pp. 43-52
Author(s):  
Terumi Touhei
Keyword(s):  
Wave Propagation ◽  
Gravity Field ◽  
Wave Number ◽  
Propagation Analysis ◽  
Fluid Media ◽  
Layered Solid

Wave Propagation Analysis of Piezoelectric Nanoplates Based on the Nonlocal Theory

2018 ◽  
Vol 18 (04) ◽  
pp. 1850060 ◽  
Author(s):  
Li-Hong Ma ◽  
Liao-Liang Ke ◽  
Yi-Ze Wang ◽  
Yue-Sheng Wang
Keyword(s):  
Wave Propagation ◽  
Electric Potential ◽  
Mechanical Load ◽  
Tensile Force ◽  
Nonlocal Parameter ◽  
Nonlocal Theory ◽  
Wave Number ◽  
Small Scale ◽  
Axial Tensile ◽  
Propagation Analysis

Based on the nonlocal theory, this paper develops the Kirchhoff nanoplate and Mindlin nanoplate models for the wave propagation analysis of piezoelectric nanoplates. The effects of small scale parameter and thermo-electro-mechanical loads are incorporated in the nanoplate models. The Hamilton’s principle is employed to derive the governing equations of the nanoplate, which are solved analytically to obtain the dispersion relation for piezoelectric nanoplates. The results show that the nonlocal parameter, temperature change, mechanical load and external electric potential have significant influence on the wave propagation characteristics of the piezoelectric nanoplates. The cut-off wave number is observed to exist for piezoelectric nanoplates subjected to positive electric potential, axial tensile force and temperature rise.

Wave Propagation Analysis in Anisotropic Plate Using Wavelet Spectral Element Approach

2008 ◽  
Vol 75 (1) ◽  
Author(s):  
Mira Mitra ◽  
S. Gopalakrishnan
Keyword(s):  
Finite Element ◽  
Wave Propagation ◽  
Differential Equations ◽  
Laminated Composite ◽  
Composite Plates ◽  
Spectral Element ◽  
Wave Number ◽  
Frequency Wave ◽  
Propagation Analysis ◽  
Spectral Finite Element

In this paper, a 2D wavelet-based spectral finite element (WSFE) is developed for a anisotropic laminated composite plate to study wave propagation. Spectral element model captures the exact inertial distribution as the governing partial differential equations (PDEs) are solved exactly in the transformed frequency-wave-number domain. Thus, the method results in large computational savings compared to conventional finite element (FE) modeling, particularly for wave propagation analysis. In this approach, first, Daubechies scaling function approximation is used in both time and one spatial dimensions to reduce the coupled PDEs to a set of ordinary differential equations (ODEs). Similar to the conventional fast Fourier transform (FFT) based spectral finite element (FSFE), the frequency-dependent wave characteristics can also be extracted directly from the present formulation. However, most importantly, the use of localized basis functions in the present 2D WSFE method circumvents several limitations of the corresponding 2D FSFE technique. Here, the formulated element is used to study wave propagation in laminated composite plates with different ply orientations, both in time and frequency domains.

On wave dispersion characteristics of fluid-conveying smart nanotubes considering surface elasticity and flexoelectricity approach

2020 ◽  
pp. 095440622096561
Author(s):  
Amir-Reza Asghari Ardalani ◽  
Ahad Amiri ◽  
Roohollah Talebitooti ◽  
Mir Saeed Safizadeh
Keyword(s):  
Wave Propagation ◽  
Strain Gradient ◽  
Surface Elasticity ◽  
Shear Deformation Theory ◽  
Wave Dispersion ◽  
Strain Gradient Theory ◽  
Wave Number ◽  
Gradient Theory ◽  
Specific Domain ◽  
Size Dependent

Wave dispersion response of a fluid-carrying piezoelectric nanotube is studied in this paper utilizing an improved model for piezoelectric materials which capture a new effect known as flexoelectricity in conjunction with the surface elasticity. For this aim, a higher order shear deformation theory is employed to model the problem. Furthermore, strain gradient effect as well as nonlocal effect is taken into consideration throughout using the nonlocal strain gradient theory (NSGT). Surface elasticity is also considered to make an accurate size-dependent formulation. Additionally, a non-compressible and non-viscous fluid is taken into consideration to model the flow effect. The wave propagation solution is then implemented to the governing equations obtained by Hamiltonian’s approach. The phase velocity and group velocity of the nanotube is determined for three wave modes (i.e. shear, longitudinal and bending waves) to study the influence of various involved factors including strain gradient, nonlocality, flexoelectricity and surface elasticity and flow velocity on the wave dispersion curves. Results reveal a considerable effect of the flexoelectric phenomenon on the wave propagation properties especially at a specific domain of the wave number. The size-dependency of this effect is disclosed. Overall, it is found that the flexoelectricity exhibits a substantial influence on wave dispersion properties of the smart fluid-conveying systems. Hence, such size-dependent effect should be considered to achieve exact and accurate knowledge on wave propagation characteristics of the system.

Electro-magneto wave propagation analysis of viscoelastic sandwich nanoplates considering surface effects

2016 ◽  
Vol 231 (2) ◽  
pp. 387-403 ◽  
Author(s):  
A Ghorbanpour Arani ◽  
M Jamali ◽  
AH Ghorbanpour-Arani ◽  
R Kolahchi ◽  
M Mosayyebi
Keyword(s):  
Zinc Oxide ◽  
Wave Propagation ◽  
Feedback Control ◽  
Graphene Sheet ◽  
Surface Effects ◽  
Structural Damping ◽  
Sensors And Actuators ◽  
Velocity Feedback ◽  
Oxide Layers ◽  
Propagation Analysis

The original formulation of the quasi-3D sinusoidal shear deformation plate theory (SSDPT) is here extended to the wave propagation analysis of viscoelastic sandwich nanoplates considering surface effects. The sandwich structure contains a single layered graphene sheet as core integrated with zinc oxide layers as sensors and actuators. The single layered graphene sheet and zinc oxide layers are subjected, respectively, to 2D magnetic and 3D electric fields. Structural damping and surface effects are assumed using Kelvin–Voigt and Gurtin–Murdoch theories, respectively. The system is rested on an elastic medium which is simulated with a novel model namely as orthotropic visco-Pasternak foundation. An exact solution is applied in order to obtain the frequency, cut-off and escape frequencies. A displacement and velocity feedback control algorithm is applied for the active control of the frequency through a closed-loop control with bonded distributed zinc oxide sensors and actuators. The detailed parametric study is conducted, focusing on the combined effects of the nonlocal parameter, magnetic field, viscoelastic foundation, surface stress, applied voltage, velocity feedback control gain and structural damping on the wave propagation behavior of nanostructure. Results depict that with increasing the structural damping coefficient, frequency significantly decreases.

A Spectral Finite Element Model for Wave Propagation Analysis in Laminated Composite Plate

2006 ◽  
Vol 128 (4) ◽  
pp. 477-488 ◽  
Author(s):  
A. Chakraborty ◽  
S. Gopalakrishnan
Keyword(s):  
Finite Element ◽  
Wave Propagation ◽  
Shear Deformation ◽  
Mechanical Response ◽  
Laminated Composite ◽  
Wave Number ◽  
Single Element ◽  
Element Formulation ◽  
Frequency Wave ◽  
Spectral Finite Element

A new spectral plate element (SPE) is developed to analyze wave propagation in anisotropic laminated composite media. The element is based on the first-order laminated plate theory, which takes shear deformation into consideration. The element is formulated using the recently developed methodology of spectral finite element formulation based on the solution of a polynomial eigenvalue problem. By virtue of its frequency-wave number domain formulation, single element is sufficient to model large structures, where conventional finite element method will incur heavy cost of computation. The variation of the wave numbers with frequency is shown, which illustrates the inhomogeneous nature of the wave. The element is used to demonstrate the nature of the wave propagating in laminated composite due to mechanical impact and the effect of shear deformation on the mechanical response is demonstrated. The element is also upgraded to an active spectral plate clement for modeling open and closed loop vibration control of plate structures. Further, delamination is introduced in the SPE and scattered wave is captured for both broadband and modulated pulse loading.

Sign in / Sign up

Export Citation Format

Share Document