Numerical study on film cooling and convective heat transfer characteristics in the cutback region of turbine blade trailing edge

Gas turbine blade trailing edge is easy to burn out under the exposure of high-temperature gas due to its thin shape. The cooling of this area is an important task in gas turbine blade design. The structure design and analysis of trailing edge is critical because of the complexity of geometry, arrangement of cooling channels, design requirement of strength, and the working condition of high heat flux. In the present paper, a 3-D model of the trailing edge cooling channel is constructed and both structures with and without land are numerically investigated at different blowing ratio. The distributions of film cooling effectiveness and convective heat transfer coefficient on cutback and land surface are analyzed, respectively. According to the results, it is obtained that the distributions of film cooling effectiveness and convective heat transfer coefficient both show the symmetrical characteristics as a result of the periodic structure of the trailing edge. The increase of blowing ratio significantly improves the film cooling effectiveness and convective heat transfer coefficient on the cutback surface, which is beneficial to the cooling of trailing edge. It is also found that the land structure is advantageous for enhancing the streamwise film cooling effectiveness of the trailing edge surface while the film cooling effectiveness on the land surface remains at a low level. Convective heat transfer coefficient exhibits a strong dependency with the blowing ratio, which suggests that film cooling effectiveness and convective heat transfer coefficient must be both considered and analyzed in the design of trailing edge cooling structure.

Download Full-text

Numerical Study on the Effects of V-Shaped Rib Angle on Film Cooling Performance for Turbine Blade Trailing Edge

Volume 5A: Heat Transfer ◽

10.1115/gt2018-75114 ◽

2018 ◽

Cited By ~ 1

Author(s):

Lin Ye ◽

Cun-liang Liu ◽

Hai-yong Liu ◽

Qi-jiao He ◽

Gang Xie

Keyword(s):

Heat Transfer ◽

Heat Transfer Coefficient ◽

Transfer Coefficient ◽

Turbine Blade ◽

Film Cooling ◽

Trailing Edge ◽

Cooling Effectiveness ◽

Cooling Performance ◽

Film Cooling Effectiveness ◽

Blowing Ratio

The trailing edge of the high-pressure turbine blade presents significant challenges to cooling structure design. To achieve better cooling performance at turbine blade trailing edge, a novel ribbed cutback structure is proposed for trailing edge cooling, which has rib structures on the cutback surface for heat transfer enhancement. In this study, numerical simulations have been performed on the effects of V-shaped rib angle on the film cooling characteristics and flow physics. Three V-shaped rib angles of 30°, 45° and 60° are studied. The distributions of adiabatic cooling effectiveness and heat transfer coefficient are obtained under blowing ratios with the value of 0.5, 1.0 and 1.5 respectively. Due to the relatively small rib height, the effect of V-shaped ribs on the film cooling effectiveness is not notable. The disadvantage of V-shaped ribs mainly exhibits at the downstream area of cutback surface. With the increase of V-shaped rib angle, the film cooling effectiveness becomes lower, but the values are still above 0.9. The V-shaped ribs obviously enhance the heat transfer on trailing edge cutback surface. The area-averaged heat transfer coefficient of the V-rib case is higher than that of the smooth case by 26.3–41.2%. The 45° V-rib case has higher heat transfer intensity than the other two V-shaped rib cases under all the three blowing ratios. However, the heat transfer coefficient distribution of the 60° V-rib case is more uniform. The heat transfer intensity of the 30° V-rib case is higher in the downstream region than the other two cases, but lower in the upstream region in which the difference becomes smaller with the increase of blowing ratio. The 45° V-rib case and the 60° V-rib case both reach the maximum value of area-averaged heat transfer intensity under blowing ratio is 1.0. Under higher blowing ratio, the 30° V-rib case and the 45° V-rib case outperform 2.1% and 6.7% higher value relative to the 60° V-rib case respectively due to the smaller velocity gradient in the 60° V-rib case in the downstream.

Download Full-text

Effects of Shape and Arrangement of Dimples on Film Cooling Performance Over Cutback Surface at Airfoil Trailing Edge

Volume 3B: Heat Transfer ◽

10.1115/gt2013-95542 ◽

2013 ◽

Author(s):

Satomi Nishida ◽

Akira Murata ◽

Hiroshi Saito ◽

Yoji Okita ◽

Chiyuki Nakamata ◽

...

Keyword(s):

Heat Transfer ◽

Heat Transfer Coefficient ◽

Transfer Coefficient ◽

Film Cooling ◽

Local Heat Transfer ◽

Trailing Edge ◽

Mean Velocity ◽

Cooling Effectiveness ◽

Cooling Performance ◽

Film Cooling Effectiveness

Trailing edge of a gas turbine blade is under very high thermal load because both sides are exposed to hot mainstream. The cooling film ejected from slots has to protect the cutback surface from the hot mainstream, and remove the heat from the surface. In this study, the film cooling performance of cutback surfaces with two types of dimples, spherical and teardrop-shaped dimples, were experimentally investigated with a transient infrared thermography method. Also, to examine the effects of arrangements, two different arrangements of the teardrop-shaped dimples, which are parallel and inclined to mainstream, were investigated. The dimples were arranged in two rows on the cutback surfaces. The Reynolds number of mainstream defined by the mean velocity and hydraulic diameter was 20,000, and profiles of local heat transfer coefficient and film cooling effectiveness on the cutback surface were measured for blowing ratios of 0.5–2.0. With the parallel teardrop-shaped dimples, reduction of the heat transfer in the upstream portion was less than that of the spherical dimples, and the heat transfer at downstream rims was higher. In the case of the inclined teardrop-shaped dimples, heat transfer enhancement at the downstream rims was higher than that of parallel one, and overall heat transfer coefficient was also higher. The film cooling effectiveness of all cases are almost equal values, namely, the dimpled surfaces could enhance heat transfer without reduction of the film cooling effectiveness; consequently significant cooling performance improvement was obtained for the teardrop-shaped dimple cases, especially with the introduction of inclined arrangement.

Download Full-text