scholarly journals Effects of Streamwise Vortex Inducement on Growth of a Compressible Double Shear Layer

2005 ◽  
Vol 53 (615) ◽  
pp. 174-181 ◽  
Author(s):  
Mikiya Araki ◽  
Jun Osaka ◽  
Osamu Imamura ◽  
Mitsuhiro Tsue ◽  
Michikata Kono
1996 ◽  
Vol 328 ◽  
pp. 345-407 ◽  
Author(s):  
C. H. K. Williamson

It is now well-known that the wake transition regime for a circular cylinder involves two modes of small-scale three-dimensional instability (modes A and B), depending on the regime of Reynolds number (Re), although almost no understanding of the physical origins of these instabilities, or indeed their effects on near-wake formation, have hitherto been made clear. We address these questions in this paper. In particular, it is found that the two different modes A and B scale on different physical features of the flow. Mode A has a larger spanwise wavelength of around 3–4 diameters, and scales on the larger physical structure in the flow, namely the primary vortex core. The wavelength for mode A is shown to be the result of an ‘elliptic instability’ in the nearwake vortex cores. The subsequent nonlinear growth of vortex loops is due to a feedback from one vortex to the next, involving spanwise-periodic deformation of core vorticity, which is then subject to streamwise stretching in the braid regios. This mode gives an out-of-phase streamwise vortex pattern.In contrast, mode-B instability has a distinctly smaller wavelength (1 diameter) which scales on the smaller physical structure in the flow, the braid shear layer. It is a manifestation of an instability in a region of hyperbolic flow. It is quite distinct from other shear flows, in that it depends on the reverse flow of the bluff-body wake; the presence of a fully formed streamwise vortex system, brought upstream from a previous half-cycle, in proximity to the newly evolving braid shear layer, leads to an in-phase stream-wise vortex array, in strong analogy with the ‘Mode 1’ of Meiburg & Lasheras (1988) for a forced unseparated wake. In mode B, we also observe amalgamation of streamwise vortices from a previous braid with like-sign vortices in the subsequent braid.It is deduced that the large scatter in previous measurements concerning mode A is due to the presence of vortex dislocations. Dislocations are triggered at the sites of some vortex loops of mode A, and represent a natural breakdown of the periodicity of mode A instability. By minimizing or avoiding the dislocations which occur from end contamination or which occur during wake transition, we find an excellent agreement of both critical Re and spanwise wavelength of mode A with the recent secondary stability analysis of Barkley & Henderson (1996).Wake transition is further characterized by velocity and pressure measurements. It is consistent that, when mode-A instability and large-scale dislocations appear, one finds a reduction of base suction, a reduction of (two-dimensional) Reynolds stress level, a growth in size of the formation region, and a corresponding drop in Strouhal frequency. Finally, the present work leads us to a new clarification of the possible flow states through transition. Right through this regime of Re, there exist two distinct and continuous Strouhal frequency curves: the upper one corresponds with purley small- scale instabilities (e.g. denoted as mode A), while the lower curve corresponds with a combination of small-scale plus dislocation structures (e.g. mode A*). However, some of the flow states are transient or ‘unstable’, and the natural transitioning wake appears to follow the scenario: (2D→A*→B).


2005 ◽  
Vol 53 (620) ◽  
pp. 408-413
Author(s):  
Mikiya Araki ◽  
Jun Osaka ◽  
Osamu Imamura ◽  
Mitsuhiro Tsue ◽  
Michikata Kono

2021 ◽  
Author(s):  
Yu M. Kulikov ◽  
E. E. Son

Abstract This paper considers the canonical problem of a thin shear layer evolution at Reynolds number Re = 400000 using the novel Compact Accurately Boundary Adjusting high-Resolution Technique (CABARET). The study is focused on the effect of the specific mesh refinement in the high shear rate areas on the flow properties under the influence of the developing instability. The original sequence of computational meshes (256^2, 512^2, 1024^2, 2048^2 cells) is modified using an iterative refinement algorithm based on the hyperbolic tangent. The properties of the solutions obtained are discussed in terms of the initial momentum thickness and the initial vorticity thickness, viscous and dilatational dissipation rates and also integral enstrophy. The growth rate for the most unstable mode depending on the mesh resolution is considered. In conclusion the accuracy of calculated mesh functions is estimated via L1, L2, L∞ norms.


2000 ◽  
Vol 413 ◽  
pp. 1-47 ◽  
Author(s):  
C. P. CAULFIELD ◽  
W. R. PELTIER

We investigate the detailed nature of the ‘mixing transition’ through which turbulence may develop in both homogeneous and stratified free shear layers. Our focus is upon the fundamental role in transition, and in particular the associated ‘mixing’ (i.e. small-scale motions which lead to an irreversible increase in the total potential energy of the flow) that is played by streamwise vortex streaks, which develop once the primary and typically two-dimensional Kelvin–Helmholtz (KH) billow saturates at finite amplitude.Saturated KH billows are susceptible to a family of three-dimensional secondary instabilities. In homogeneous fluid, secondary stability analyses predict that the stream-wise vortex streaks originate through a ‘hyperbolic’ instability that is localized in the vorticity braids that develop between billow cores. In sufficiently strongly stratified fluid, the secondary instability mechanism is fundamentally different, and is associated with convective destabilization of the statically unstable sublayers that are created as the KH billows roll up.We test the validity of these theoretical predictions by performing a sequence of three-dimensional direct numerical simulations of shear layer evolution, with the flow Reynolds number (defined on the basis of shear layer half-depth and half the velocity difference) Re = 750, the Prandtl number of the fluid Pr = 1, and the minimum gradient Richardson number Ri(0) varying between 0 and 0.1. These simulations quantitatively verify the predictions of our stability analysis, both as to the spanwise wavelength and the spatial localization of the streamwise vortex streaks. We track the nonlinear amplification of these secondary coherent structures, and investigate the nature of the process which actually triggers mixing. Both in stratified and unstratified shear layers, the subsequent nonlinear amplification of the initially localized streamwise vortex streaks is driven by the vertical shear in the evolving mean flow. The two-dimensional flow associated with the primary KH billow plays an essentially catalytic role. Vortex stretching causes the streamwise vortices to extend beyond their initially localized regions, and leads eventually to a streamwise-aligned collision between the streamwise vortices that are initially associated with adjacent cores.It is through this collision of neighbouring streamwise vortex streaks that a final and violent finite-amplitude subcritical transition occurs in both stratified and unstratified shear layers, which drives the mixing process. In a stratified flow with appropriate initial characteristics, the irreversible small-scale mixing of the density which is triggered by this transition leads to the development of a third layer within the flow of relatively well-mixed fluid that is of an intermediate density, bounded by narrow regions of strong density gradient.


1994 ◽  
Vol 281 ◽  
pp. 247-291 ◽  
Author(s):  
David G. Schowalter ◽  
Charles W. Van Van Atta ◽  
Juan C. Lasheras

The existence of an organized streamwise vortical structure, which is superimposed on the well known coherent spanwise vorticity in nominally two-dimensional free shear layers, has been studied extensively. In the presence of stratification, however, buoyancy forces contribute to an additional mechanism for the generation of streamwise vorticity. As the spanwise vorticity layer rolls up and pulls high-density fluid above low-density fluid, a local instability results. The purpose of the current investigation is to force the three-dimensional instability in the stratified shear layer. In this manner, we experimentally observe the effect of buoyancy on the streamwise vortex tube evolution, the evolution of the buoyancy-induced instability, and the interaction between these two vortical structures. A simple numerical model is proposed which captures the relevant physics of the flow evolution. It is found that, depending on the location, streamwise vortices resulting from vortex stretching may be weakened or enhanced by the stratification. Buoyancy-induced vortex structures are shown to form where the unstable part of the interface is tilted by the streamwise vortex tubes. These vortices strengthen initially, then weaken downstream, the timescale for this process depending upon the degree of stratification. For initial Richardson numbers larger than about 0.03, the baroclinically weakened vortex tubes eventually disappear as the flow evolves downstream and the baroclinically generated vortices dominate the three-dimensional flow structure.


2000 ◽  
Vol 48 (556) ◽  
pp. 148-154 ◽  
Author(s):  
Mikiya ARAKI ◽  
Motoki HARADA ◽  
Yuichi OGURA ◽  
Seiji SHIBA ◽  
Keiichi OKAI ◽  
...  

1988 ◽  
Vol 189 ◽  
pp. 53-86 ◽  
Author(s):  
J. C. Lasheras ◽  
H. Choi

The three-dimensional development of a plane free shear layer subjected to small sinusoidal perturbations periodically placed along the span is experimentally studied. Both laser induced fluorescence and direct interface visualization are used to monitor the interface between the two fluids. The development of the different flow stabilities is obtained through analysis of the temporal and spatial evolution of the interface separating the two streams. It is shown that the characteristic time of growth of the two-dimensional shear instability is much shorter than that of the three-dimensional instability. The primary Kelvin-Helmholtz instability develops first, leading to the formation of an almost two-dimensional array of spanwise vortex tubes. Under the effect of the strain field created by the evolving spanwise vortices, the perturbed vorticity existing on the braids undergoes axial stretching, resulting in the formation of vortex tubes whose axes are aligned with the principal direction of the positive strain field. During the formation of these streamwise vortex tubes, the spanwise vortices maintain, to a great extent, their two-dimensionality, suggesting an almost uncoupled development of both instabilities. The vortex tubes formed through the three-dimensional instability of the braids further undergo nonlinear interactions with the spanwise vortices inducing on their cores a wavy undulation of the same wavelength, but 180° phase shifted with respect to the perturbation. In addition, it is shown that owing to the nature of the three-dimensional instability, the effect of vertical and axial perturbations are coupled. Finally, the influence of the amplitude and wavelength of the perturbation on the development of the two- and three-dimensional instabilities is described.


2013 ◽  
Vol 2013 (0) ◽  
pp. _S052035-1-_S052035-3
Author(s):  
Shunsuke FUNAOKA ◽  
Shunsuke YAMADA ◽  
Seiji ICHIKAWA ◽  
Hitoshi ISHIKAWA

Sign in / Sign up

Export Citation Format

Share Document