Optical sensors for alignment, distance measurement, and feature location in automated manufacturing operations

1988 ◽  
Author(s):  
Warren H. Stevenson
Keyword(s):  
Optical Sensors ◽  
Distance Measurement ◽  
Automated Manufacturing ◽  
Feature Location ◽  
Manufacturing Operations

Comparison of two devices for measuring exercise transcutaneous oxygen pressures in patients with claudication

VASA ◽  
2015 ◽  
Vol 44 (5) ◽  
pp. 355-362 ◽  
Author(s):  
Marie Urban ◽  
Alban Fouasson-Chailloux ◽  
Isabelle Signolet ◽  
Christophe Colas Ribas ◽  
Mathieu Feuilloy ◽  
...  
Keyword(s):  
Oxygen Pressure ◽  
Optical Sensors ◽  
Chemical Sensors ◽  
Transcutaneous Oxygen ◽  
Starting Values ◽  
Two Systems ◽  
Transcutaneous Oxygen Pressure ◽  
New Sensors ◽  
Changes Over Time ◽  
Over Time

Abstract. Summary: Background: We aimed at estimating the agreement between the Medicap® (photo-optical) and Radiometer® (electro-chemical) sensors during exercise transcutaneous oxygen pressure (tcpO2) tests. Our hypothesis was that although absolute starting values (tcpO2rest: mean over 2 minutes) might be different, tcpO2-changes over time and the minimal value of the decrease from rest of oxygen pressure (DROPmin) results at exercise shall be concordant between the two systems. Patients and methods: Forty seven patients with arterial claudication (65 + / - 7 years) performed a treadmill test with 5 probes each of the electro-chemical and photo-optical devices simultaneously, one of each system on the chest, on each buttock and on each calf. Results: Seventeen Medicap® probes disconnected during the tests. tcpO2rest and DROPmin values were higher with Medicap® than with Radiometer®, by 13.7 + / - 17.1 mm Hg and 3.4 + / - 11.7 mm Hg, respectively. Despite the differences in absolute starting values, changes over time were similar between the two systems. The concordance between the two systems was approximately 70 % for classification of test results from DROPmin. Conclusions: Photo-optical sensors are promising alternatives to electro-chemical sensors for exercise oximetry, provided that miniaturisation and weight reduction of the new sensors are possible.

Optical sensors: Small but versatile

Nature China ◽  
2008 ◽  
Author(s):  
Vicki Cleave
Keyword(s):  
Optical Sensors

High-voltage monitoring by the fiber-optic recirculating measuring system

2020 ◽  
pp. 38-44
Author(s):  
A. V. Polyakov ◽  
M. A. Ksenofontov
Keyword(s):  
Optical Fibers ◽  
High Voltage ◽  
Optical Sensors ◽  
Electromagnetic Interference ◽  
Fiber Optic ◽  
Electric Power Industry ◽  
Measuring System ◽  
Voltage Range ◽  
External Electromagnetic Fields ◽  
Optic Communication

Optical technologies for measuring electrical quantities attract great attention due to their unique properties and significant advantages over other technologies used in high-voltage electric power industry: the use of optical fibers ensures high stability of measuring equipment to electromagnetic interference and galvanic isolation of high-voltage sensors; external electromagnetic fields do not influence the data transmitted from optical sensors via fiber-optic communication lines; problems associated with ground loops are eliminated, there are no side electromagnetic radiation and crosstalk between the channels. The structure and operation principle of a quasi-distributed fiber-optic high-voltage monitoring system is presented. The sensitive element is a combination of a piezo-ceramic tube with an optical fiber wound around it. The device uses reverse transverse piezoelectric effect. The measurement principle is based on recording the change in the recirculation frequency under the applied voltage influence. When the measuring sections are arranged in ascending order of the measured effective voltages relative to the receiving-transmitting unit, a relative resolution of 0,3–0,45 % is achieved for the PZT-5H and 0,8–1,2 % for the PZT-4 in the voltage range 20–150 kV.

Modelling Light Transmission in a Fiber-Optical Reflection System

2004 ◽  
Vol 9 (1) ◽  
pp. 55-63
Author(s):  
V. Kleiza
Keyword(s):  
Optical Sensors ◽  
Light Transmission ◽  
External Cavity ◽  
Linear Displacement ◽  
Fiber System ◽  
Light Emitting ◽  
Optical Media ◽  
Reflected Light ◽  
Fiber Optical ◽  
Fiber Optical Sensors

Light transmission in the reflection fiber system, located in external optical media, has been investigated for application as sensors. The system was simulated by different models, including external cavity parameters such as the distance between light emitting and receiving fibers and mirror positioning distance. The sensitivity to a linear displacement of the sensors was studied as a function of the distance between the tips of the light emitting fiber and the center of the pair reflected light collecting fibers, by positioning a mirror. Physical fundamentals and operating principles of the advanced fiber optical sensors were revealed.

Acoustic Distance Measurement Method Using 2ch Microphones Measurable from 0m Based on Phase Interference and Removal of DC Component

2015 ◽  
Vol 135 (11) ◽  
pp. 1349-1350
Author(s):  
Kazuhiro Suzuki ◽  
Noboru Nakasako ◽  
Masato Nakayama ◽  
Toshihiro Shinohara ◽  
Tetsuji Uebo
Keyword(s):  
Measurement Method ◽  
Distance Measurement ◽  
Phase Interference ◽  
Dc Component

Acoustic Distance Measurement Using Complex ICA as Pre-processing for Adjacent 3ch Observations under Environmental Noise

2021 ◽  
Vol 141 (1) ◽  
pp. 61-67
Author(s):  
Hajime Tai ◽  
Toshihiro Shinohara ◽  
Tetsuji Uebo ◽  
Noboru Nakasako
Keyword(s):  
Environmental Noise ◽  
Distance Measurement

Hybrid Micro-Optical Sensors via Sol-Gel Soft Lithography

2000 ◽  
Vol 628 ◽  
Author(s):  
Mark A. Clarner ◽  
Michael J. Lochhead
Keyword(s):  
Optical Sensors ◽  
Soft Lithography ◽  
Sol Gel ◽  
Silica Gels ◽  
Ph Sensing ◽  
Ambient Conditions ◽  
Sensor Applications ◽  
Patterned Structures ◽  
Biological Functionality ◽  
Indicator Dyes

ABSTRACTOrganically modified silica gels and dye-doped silica gels have been patterned into micrometer-scale structures on a substrate using micro molding in capillaries (MIMIC). This approach is from a class of elastomeric stamping and molding techniques collectively known as soft lithography. Soft lithography and sol-gel processing share attractive features in that they are relatively benign processes performed at ambient conditions, which makes both techniques compatible with a wide variety of organic molecules, molecular assemblies, and biomolecules. The combination of sol-gel and soft lithography, therefore, holds enormous promise as a tool for microfabrication of materials with optical, chemical, or biological functionality that are not readily patterned with conventional methods. This paper describes our investigation of micro-patterned organic-inorganic hybrid materials containing indicator dyes for microfluidic sensor applications. Reversible colorimetric pH sensing via entrapped reagents is demonstrated in a prototype microfluidic sensor element. Patterned structures range from one to tens of micrometers in cross-section and are up to centimeters in length. Fundamental chemical processing issues associated with mold filling, cracking and sensor stability are discussed.

Sign in / Sign up

Export Citation Format

Share Document