Assessing Visibility of Individual Transmission Errors in Networked Video

2016 ◽  
Vol 2016 (16) ◽  
pp. 1-8 ◽  
Author(s):  
Jari Korhonen ◽  
Claire Mantel
Keyword(s):  
Transmission Errors ◽  
Networked Video

scholarly journals Computerized Design and Generation of Low-Noise Helical Gears with Modified Surface Topology

1995 ◽  
Vol 117 (2A) ◽  
pp. 254-261 ◽  
Author(s):  
F. L. Litvin ◽  
N. X. Chen ◽  
J. Lu ◽  
R. F. Handschuh
Keyword(s):  
Gear Tooth ◽  
Error Function ◽  
Transmission Error ◽  
Low Noise ◽  
Surface Topology ◽  
Helical Gears ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Pinion Gear ◽  
Tooth Surfaces

An approach for the design and generation of low-noise helical gears with localized bearing contact is proposed. The approach is applied to double circular arc helical gears and modified involute helical gears. The reduction of noise and vibration is achieved by application of a predesigned parabolic function of transmission errors that is able to absorb a discontinuous linear function of transmission errors caused by misalignment. The localization of the bearing contact is achieved by the mismatch of pinion-gear tooth surfaces. Computerized simulation of meshing and contact of the designed gears demonstrated that the proposed approach will produce a pair of gears that has a parabolic transmission error function even when misalignment is present. Numerical examples for illustration of the developed approach are given.

Computerized Design, Generation and Simulation of Meshing of Modified Involute Spur Gears With Localized Bearing Contact and Reduced Level of Transmission Errors

1997 ◽  
Vol 119 (1) ◽  
pp. 96-100 ◽  
Author(s):  
F. L. Litvin ◽  
D. H. Kim
Keyword(s):  
Computer Programs ◽  
Spur Gears ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Design Generation

The authors propose modification of geometry of spur gears that enable to localize the bearing contact and reduce the level of transmission errors. Methods for generation of spur gears with the modified geometry are proposed as well. Computer programs for simulation of meshing and contact of misaligned spur gears with the modified geometry have been developed. The developed theory is illustrated with numerical examples.

A Proposed Model for Stochastic Vibration Analysis of Gear Transmission Systems

1996 ◽  
Author(s):  
Y. Wang ◽  
W. Zhang
Keyword(s):  
Vibration Analysis ◽  
Linear Time ◽  
Simulation System ◽  
Gear Transmission ◽  
Random Component ◽  
Transmission Systems ◽  
Transmission Errors ◽  
Proposed Model ◽  
Rotational Vibration ◽  
Random Components

Abstract A new mathematical model is presented for analyzing the vibration of gear transmission systems with consideration of the influence of the time-variant stiffness, loads, gear transmission errors. The gear transmission system is modeled as a non-linear, time-correlated and stationary stochastic system. The transmission errors of gears are decomposed into harmonic and random components in terms of the different characteristics of their spectrums. The random component is simulated by a second order Markov process. A simulation system for vibration analysis of gear transmission systems is then developed, based on this new model. The input to this system is a Guassian white noise process and harmonic errors, and the output is the rotational vibration acceleration of gears. Some experiments are conducted to verify the proposed model. By comparing the results generated from the simulation system with those from the experiments, the proposed model is found to reach a fairly good accuracy, and thus the model is useful in designing gear transmission systems with the objective to reduce the vibration and noise of the systems in operation.

Optimal Tooth Modifications in Hypoid Gears

2004 ◽  
Vol 127 (4) ◽  
pp. 646-655 ◽  
Author(s):  
Vilmos Simon
Keyword(s):  
Load Distribution ◽  
Angular Position ◽  
Point Contact ◽  
Tooth Surface ◽  
Gear Pair ◽  
Hypoid Gear ◽  
Tooth Contact ◽  
Hypoid Gears ◽  
Transmission Errors ◽  
Tool Profile

A method for the determination of optimal tooth modifications in hypoid gears based on improved load distribution and reduced transmission errors is presented. The modifications are introduced into the pinion tooth surface by using a cutter with bicircular profile and optimal diameter. In the optimization of tool parameters the influence of shaft misalignments of the mating members is included. As the result of these modifications a point contact of the meshed teeth surfaces appears instead of line contact; the hypoid gear pair becomes mismatched. By using the method presented in (Simon, V., 2000, “Load Distribution in Hypoid Gears,” ASME J. Mech. Des., 122, pp. 529–535) the influence of tooth modifications introduced on tooth contact and transmission errors is investigated. Based on the results that was obtained the radii and position of circular tool profile arcs and the diameter of the cutter for pinion teeth generation were optimized. By applying the optimal tool parameters, the maximum tooth contact pressure is reduced by 16.22% and the angular position error of the driven gear by 178.72%, in regard to the hypoid gear pair with a pinion manufactured by a cutter of straight-sided profile and of diameter determined by the commonly used methods.

Optimal Machine-Tool Settings for the Manufacture of Face-Hobbed Spiral Bevel Gears

2014 ◽  
Vol 136 (8) ◽  
Author(s):  
Vilmos V. Simon
Keyword(s):  
Contact Pressure ◽  
Optimization Problem ◽  
Transmission Error ◽  
Search Method ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Transmission Errors ◽  
Bevel Gears ◽  
Spiral Bevel ◽  
Loaded Tooth Contact Analysis

In this study, an optimization methodology is proposed to systematically define the optimal head-cutter geometry and machine-tool settings to simultaneously minimize the tooth contact pressure and angular displacement error of the driven gear (the transmission error), and to reduce the sensitivity of face-hobbed spiral bevel gears to the misalignments. The proposed optimization procedure relies heavily on the loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors influenced by the misalignments inherent in the gear pair. The load distribution and transmission error calculation method employed in this study were developed by the author of this paper. The targeted optimization problem is a nonlinear constrained optimization problem, belonging to the framework of nonlinear programming. In addition, the objective function and the constraints are not available analytically, but they are computable, i.e., they exist numerically through the loaded tooth contact analysis. For these reasons, a nonderivative method is selected to solve this particular optimization problem. That is the reason that the core algorithm of the proposed nonlinear programming procedure is based on a direct search method. The Hooke and Jeeves pattern search method is applied. The effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. Drastic reductions in the maximum tooth contact pressure (62%) and in the transmission errors (70%) were obtained.

Design and Geometry of Face-Gear Drives

1992 ◽  
Vol 114 (4) ◽  
pp. 642-647 ◽  
Author(s):  
F. L. Litvin ◽  
Y. Zhang ◽  
J.-C. Wang ◽  
R. B. Bossler ◽  
Y.-J. D. Chen
Keyword(s):  
Face Gear ◽  
Analytical Geometry ◽  
Numerical Examples ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Computerized Simulation ◽  
Gear Drives

The authors have developed the analytical geometry of face-gear drives, proposed the method for localization of bearing contact, developed computerized simulation of meshing and bearing contact, investigated the influence of gear misalignment on the shift of bearing contact and transmission errors. Application for design is discussed. The obtained results are illustrated with numerical examples.

Intelligence differences: neural transmission errors or cerebral arousability?

Kybernetes ◽  
1997 ◽  
Vol 26 (4) ◽  
pp. 407-424 ◽  
Author(s):  
David L. Robinson ◽  
Jaafar Behbehani
Keyword(s):  
Transmission Errors ◽  
Neural Transmission
Sign in / Sign up

Export Citation Format

Share Document