Structural, Thermal and Electrical Properties of Doped Poly(3,4 ethylenedioxythiophene)

2016 ◽  
Vol 10 (4) ◽  
pp. 395-400 ◽  
Author(s):  
Deepali Kelkar ◽  
◽  
Ashish Chourasia ◽  
◽  
Keyword(s):  
Crystal Structure ◽  
Electrical Properties ◽  
Xrd Analysis ◽  
Structure Modification ◽  
Camphorsulfonic Acid ◽  
Thermal And Electrical Properties ◽  
Ft Ir

Poly(3,4-ethylenedioxythiophene) (PEDOT) was chemically synthesized, undoped and then re-doped using FeCl3 as well as camphorsulfonic acid (CSA). FT-IR results confirm the nature of the synthesized and doped samples. XRD analysis indicates crystal structure modification after doping and was also used to calculate crystallinity of samples. Crystallinity increases after FeCl3 doping, whereas it reduces due to CSA doping. TGA-DTA results show reduction in Tg value for FeCl3 doped sample while it increases for CSA doped samples compared to that of undoped PEDOT. Reduction in Tg indicates plasticizing effect of FeCl3 whereas increase in Tg show anti-plasticizing effect of CSA in PEDOT. Conductivity value () increases by two orders of magnitude after doping. Log vs. 1/T graph show metallic nature of undoped PEDOT above 308 K, however both doped samples show semiconducting nature from 301 to 383 K.

The influence of Fe, Cu, Al -doping on the crystal structure, thermal and electrical properties of calcium titanate

2008 ◽  
Vol 179 (27-32) ◽  
pp. 1615-1619 ◽  
Author(s):  
A.A. Murashkina ◽  
A.N. Demina ◽  
A.K. Demin ◽  
V.I. Maragou ◽  
P.E. Tsiakaras
Keyword(s):  
Crystal Structure ◽  
Electrical Properties ◽  
Calcium Titanate ◽  
Al Doping ◽  
Thermal And Electrical Properties

Effect of electron irradiation on optical, thermal and electrical properties of polymer electrolyte

2019 ◽  
Vol 322 (1) ◽  
pp. 19-27 ◽  
Author(s):  
B. K. Mahantesha ◽  
V. Ravindrachary ◽  
R. Padmakumari ◽  
R. Sahanakumari ◽  
Pratheeka Tegginamata ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Polymer Electrolyte ◽  
Electron Irradiation ◽  
Thermal And Electrical Properties

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

Sign in / Sign up

Export Citation Format

Share Document