New Technologies in Training Programming PLC

Industrial Control Systems ◽

Real Process ◽

Automation Systems ◽

It is noted that the effective application of programmable logic controllers in automated control systems in launching complexes is closely linked to the training of specialists, capable to carry out the development of application software. In connection with complexity of debugging of the developed programs on real process equipment an analysis of the possible variants of simulation of control processes is performed and effectiveness of virtualization of control objects on computers is noted. The developed applications of Real Games-company to create virtual control objects using 3D-graphics for training to usage of programmable logic controllers in industrial control systems are considered. The perspectives for the application software of Real Games-company in the training of specialists for automation systems of technological equipment in launching complexes are evaluated.

Proceedings of IEEE/IAS International Conference on Industrial Automation and Control ◽

Implementation of fail-safe control systems using programmable logic controllers

10.1109/iacc.1995.465808 ◽

2002 ◽

Cited By ~ 2

Author(s):

J. Marcos ◽

E. Mandado ◽

C.M. Penalver

Keyword(s):

Control Systems ◽

Programmable Logic ◽

Safe Control ◽

Fail Safe ◽

The Introduction of Programmable Logic Controllers into US Navy Machinery Control Systems

Naval Engineers Journal ◽

10.1111/j.1559-3584.1998.tb02398.x ◽

1998 ◽

Vol 110 (1) ◽

pp. 217-223

Author(s):

C. M. Anderson ◽

J. E. Greenblatt ◽

K. A. Lively

Keyword(s):

Control Systems ◽

Programmable Logic ◽

Us Navy ◽

Performance Evaluation on Electronic Control Systems for Field Sprayers Using Programmable Logic Controllers

10.13031/2013.8341 ◽

2013 ◽

Author(s):

U.R. Antuniassi ◽

Z.N. Figueiredo ◽

W.P.A. de Carvalho and D.R. Pinto

Keyword(s):

Performance Evaluation ◽

Control Systems ◽

Programmable Logic ◽

Electronic Control ◽

Handbook of Research on Industrial Informatics and Manufacturing Intelligence - Advances in Civil and Industrial Engineering ◽

SoftPLC-Based Control

10.4018/978-1-4666-0294-6.ch019 ◽

2012 ◽

pp. 440-463 ◽

Cited By ~ 2

Author(s):

Stefano Scanzio

Keyword(s):

Open Source ◽

Control Systems ◽

Real Time ◽

Open Source Software ◽

Industrial Ethernet ◽

Programmable Logic ◽

Hard Real Time ◽

Nowadays, most control systems are based on programmable logic controllers (PLCs) and on commercial programs, but the use of conventional PCs is becoming an increasing by popularity and competitive alternative. After an introduction that underlines the positive and negative aspects of both solutions, EtherCAT, a hard real-time industrial Ethernet protocol that allows the use of both conventional PCs and open-source software, is analyzed. Two different EtherCAT master implementations are compared, which are based on a commercial and on a open-source software, respectively. In order to highlight differences and provide a short reference, a simple example was implemented in the two environments.

Modeling Multicore Programmable Logic Controllers in Networked Automation Systems

IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society ◽

10.1109/iecon.2013.6699843 ◽

2013 ◽

Cited By ~ 4

Author(s):

M. Hashemi Farzaneh ◽

S . Feldmann ◽

C. Legat ◽

J. Folmer ◽

B. Vogel-Heuser

Keyword(s):

Programmable Logic ◽

Automation Systems ◽

Development of an automated control system for 6/0.4 kV transformer substation with automatic transfer switch using standard IEC 61131-3

E3S Web of Conferences ◽

10.1051/e3sconf/202128801105 ◽

2021 ◽

Vol 288 ◽

pp. 01105

Author(s):

V. Ivanova ◽

N. Rozhentcova ◽

E. Gracheva ◽

A. Udaratin

Keyword(s):

Power Systems ◽

Programming Languages ◽

Smart Sensors ◽

Programmable Logic ◽

Automated Control ◽

Transformer Substation ◽

Automation Systems ◽

Electromechanical Equipment ◽

This work is devoted to the development of an automated transfer switch (ATS) for the 6/0.4 kV substation. The work is relevant due to the introduction of automation and the replacement of electromechanical equipment with microprocessor devices in the power systems. At the lower (field) level, automation is driven by the use of programmable logic controllers (PLCs) and various smart sensors. The possibility of using modular PLC in automation systems is considered. Developed are an algorithm and a program for the implementation of automated regulation of the application of automatic transfer switches at a substation using the recommendations of the IEC 61131.3 “Programming languages of programmable logic controllers” standard.

Fuel Control of Gas Turbines by Programmable Logic Controllers

Volume 3A: General ◽

10.1115/93-gt-242 ◽

1993 ◽

Author(s):

Dan A. King

Keyword(s):

Control System ◽

Natural Gas ◽

Control Systems ◽

Gas Turbine ◽

Gas Turbines ◽

Programmable Logic Controller ◽

Programmable Logic ◽

Control Functions ◽

NOVA Corporation of Alberta has developed a programmable logic controller based gas turbine fuel control system for natural gas compressor set applications. The system carries out all necessary fuel control functions and was integrated into the existing programmable logic controller used for sequencing and shutdown. The system has been successfully implemented on several different aero derivative gas turbines to date. This paper discusses the development of the system, its performance and advantages over standalone hardware-based fuel control systems typically used in the application.