Examples of reconstruction of productive strata depositional environment in Azerbaijan on the base of well logging data

Author(s):  
V.M. Seidov ◽  
◽  
L.N. Khalilova ◽  
Author(s):  
Bahman Kiani Shavandi ◽  
Vahid Ahmadi

<div><p><em>Asmari formation in Maroon Oilfield is made up of fossil-bearing limestone, dolomitic limestone, argillaceous limestone, sandstone and shale. It is the main reservoir rock for multiple oil wells of Zagros. The formation in Maroon Oilfield dates back to Oligocene(Rupelian – Burdigalian). In the present study, sequence stratigraphy and depositional environment of Asmari Reservoir Formation located in Maroon Oilfield are studied through well-logging data. The lower limit of Asmari Formation in the studied area is Pabede Formation and its upper limit is Gachsaran Formation. The lower limit between Asmari and Pabede formations and upper limit between Asmari and Gachsaran formations are not continuous and signs of discontinuity are observed in them. The field, macroscopic and microscopic studied and determination of percentage and type of allochem and orthochem elements led to identification of 17 carbonate and clastic facies in Asmari Formation. In the section, 6 depositional sequences were identified and labeled as sequence 1-6. The sequence limits are all of SB2 type with exception of Sequence 6 which is SB1. </em></p></div>


Author(s):  
A., C. Prasetyo

Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of pore pressures using the Eaton Method. The stages are determining shale intervals with GR logs, calculating vertical stress/overburden stress values, determining normal compaction trends, making cross plots of sonic logs against density logs, calculating geothermal gradients, analyzing hydrocarbon maturity, and calculating sedimentation rates with burial history. The research conducted an analysis method on the distribution of clay mineral composition to determine depositional environment and its relationship to overpressure. The wells include GAP-01, GAP-02, GAP-03, and GAP-04 which has an overpressure zone range at depth 8501-10988 ft. The pressure value within the 4 wells has a range between 4358-7451 Psi. Overpressure mechanism in the GAP field is caused by non-loading mechanism (clay mineral diagenesis and hydrocarbon maturation). Overpressure distribution is controlled by its stratigraphy. Therefore, it is possible overpressure is spread quite broadly, especially in the low morphology of the “GAP” Field. This relates to the delta depositional environment with thick shale. Based on clay minerals distribution, the northern part (GAP 02 & 03) has more clay mineral content compared to the south and this can be interpreted increasingly towards sea (low energy regime) and facies turned into pro-delta. Overpressure might be found shallower in the north than the south due to higher clay mineral content present to the north.


Sign in / Sign up

Export Citation Format

Share Document