scholarly journals Using BIM to facilitate iterative design

2015 ◽  
Author(s):  
M. H. Sakikhales ◽  
S. Stravoravdis
Keyword(s):  
Iterative Design

Rim Slip and Bead Fitment of Tires: Analysis and Design2

2006 ◽  
Vol 34 (1) ◽  
pp. 38-63 ◽  
Author(s):  
C. Lee
Keyword(s):  
Pressure Distribution ◽  
Contact Pressure ◽  
Frictional Torque ◽  
Finite Element Analyses ◽  
Inflation Pressure ◽  
Contact Pressure Distribution ◽  
Design Modification ◽  
Iterative Design ◽  
Slip Resistance ◽  
Braking Torque

Abstract A tire slips circumferentially on the rim when subjected to a driving or braking torque greater than the maximum tire-rim frictional torque. The balance of the tire-rim assembly achieved with weight attachment at certain circumferential locations in tire mounting is then lost, and vibration or adverse effects on handling may result when the tire is rolled. Bead fitment refers to the fit between a tire and its rim, and in particular, to whether a gap exists between the two. Rim slip resistance, or the maximum tire-rim frictional torque, is the integral of the product of contact pressure, friction coefficient, and the distance to the wheel center over the entire tire-rim interface. Analytical solutions and finite element analyses were used to study the dependence of the contact pressure distribution on tire design and operating attributes such as mold ring profile, bead bundle construction and diameter, and inflation pressure, etc. The tire-rim contact pressure distribution consists of two parts. The pressure on the ledge and the flange, respectively, comes primarily from tire-rim interference and inflation. Relative contributions of the two to the total rim slip resistance vary with tire types, depending on the magnitudes of ledge interference and inflation pressure. Based on the analyses, general guidelines are established for bead design modification to improve rim slip resistance and mountability, and to reduce the sensitivity to manufacturing variability. An iterative design and analysis procedure is also developed to improve bead fitment.

Multimodal and Adaptive Learning Management: An Iterative Design

2015 ◽  
Vol 12 (3) ◽  
pp. 13-18
Author(s):  
David R. Squires ◽  
◽  
Michael A. Orey ◽  
Keyword(s):  
Adaptive Learning ◽  
Iterative Design ◽  
Learning Management

Introduction

2018 ◽  
Author(s):  
Xiaojun Bi ◽  
Andrew Howes ◽  
Per Ola Kristensson ◽  
Antti Oulasvirta ◽  
John Williamson
Keyword(s):  
Information Visualization ◽  
User Interfaces ◽  
Graphic Design ◽  
Interaction Design ◽  
Human Interaction ◽  
Learning Design ◽  
Human Factors Engineering ◽  
Interaction Techniques ◽  
Iterative Design ◽  
And Control

This chapter introduces the field of computational interaction, and explains its long tradition of research on human interaction with technology that applies to human factors engineering, cognitive modelling, artificial intelligence and machine learning, design optimization, formal methods, and control theory. It discusses how the book as a whole is part of an argument that, embedded in an iterative design process, computational interaction design has the potential to complement human strengths and provide a means to generate inspiring and elegant designs without refuting the part played by the complicated, and uncertain behaviour of humans. The chapters in this book manifest intellectual progress in the study of computational principles of interaction, demonstrated in diverse and challenging applications areas such as input methods, interaction techniques, graphical user interfaces, information retrieval, information visualization, and graphic design.

scholarly journals TRACING THE EMERGENCE OF DESIGN PROBLEMS AND THEIR IMPACTS ON THE COMPLEXITY OF ENGINEERING SOLUTIONS

2021 ◽  
Vol 1 ◽  
pp. 3229-3238
Author(s):  
Torben Beernaert ◽  
Pascal Etman ◽  
Maarten De Bock ◽  
Ivo Classen ◽  
Marco De Baar
Keyword(s):  
Large Scale ◽  
Fusion Reactor ◽  
Design Stage ◽  
Engineering Model ◽  
Design Problems ◽  
Nuclear Fusion Reactor ◽  
Early Design Stage ◽  
Iterative Design ◽  
Problems And Solutions ◽  
Emergent Design

AbstractThe design of ITER, a large-scale nuclear fusion reactor, is intertwined with profound research and development efforts. Tough problems call for novel solutions, but the low maturity of those solutions can lead to unexpected problems. If designers keep solving such emergent problems in iterative design cycles, the complexity of the resulting design is bound to increase. Instead, we want to show designers the sources of emergent design problems, so they may be dealt with more effectively. We propose to model the interplay between multiple problems and solutions in a problem network. Each problem and solution is then connected to a dynamically changing engineering model, a graph of physical components. By analysing the problem network and the engineering model, we can (1) derive which problem has emerged from which solution and (2) compute the contribution of each design effort to the complexity of the evolving engineering model. The method is demonstrated for a sequence of problems and solutions that characterized the early design stage of an optical subsystem of ITER.

A Perioperative Care Display for Understanding High Acuity Patients

2021 ◽  
Vol 12 (01) ◽  
pp. 164-169
Author(s):  
Laurie Lovett Novak ◽  
Jonathan Wanderer ◽  
David A. Owens ◽  
Daniel Fabbri ◽  
Julian Z. Genkins ◽  
...  
Keyword(s):  
Data Visualization ◽  
Design Process ◽  
Cognitive Task ◽  
Development Project ◽  
Clinical Informatics ◽  
Data Display ◽  
Data Types ◽  
Iterative Design ◽  
High Acuity ◽  
Depth Interviews

Abstract Background The data visualization literature asserts that the details of the optimal data display must be tailored to the specific task, the background of the user, and the characteristics of the data. The general organizing principle of a concept-oriented display is known to be useful for many tasks and data types. Objectives In this project, we used general principles of data visualization and a co-design process to produce a clinical display tailored to a specific cognitive task, chosen from the anesthesia domain, but with clear generalizability to other clinical tasks. To support the work of the anesthesia-in-charge (AIC) our task was, for a given day, to depict the acuity level and complexity of each patient in the collection of those that will be operated on the following day. The AIC uses this information to optimally allocate anesthesia staff and providers across operating rooms. Methods We used a co-design process to collaborate with participants who work in the AIC role. We conducted two in-depth interviews with AICs and engaged them in subsequent input on iterative design solutions. Results Through a co-design process, we found (1) the need to carefully match the level of detail in the display to the level required by the clinical task, (2) the impedance caused by irrelevant information on the screen such as icons relevant only to other tasks, and (3) the desire for a specific but optional trajectory of increasingly detailed textual summaries. Conclusion This study reports a real-world clinical informatics development project that engaged users as co-designers. Our process led to the user-preferred design of a single binary flag to identify the subset of patients needing further investigation, and then a trajectory of increasingly detailed, text-based abstractions for each patient that can be displayed when more information is needed.

scholarly journals Consolidated Bioprocessing: Synthetic Biology Routes to Fuels and Fine Chemicals

2021 ◽  
Vol 9 (5) ◽  
pp. 1079
Author(s):  
Alec Banner ◽  
Helen S. Toogood ◽  
Nigel S. Scrutton
Keyword(s):  
Enzymatic Degradation ◽  
Consolidated Bioprocessing ◽  
Carbon Sources ◽  
Cellulolytic Enzymes ◽  
Waste Biomass ◽  
Chemical Production ◽  
Iterative Design ◽  
Biomass Feedstocks ◽  
Advanced Fuels ◽  
Design Build

The long road from emerging biotechnologies to commercial “green” biosynthetic routes for chemical production relies in part on efficient microbial use of sustainable and renewable waste biomass feedstocks. One solution is to apply the consolidated bioprocessing approach, whereby microorganisms convert lignocellulose waste into advanced fuels and other chemicals. As lignocellulose is a highly complex network of polymers, enzymatic degradation or “saccharification” requires a range of cellulolytic enzymes acting synergistically to release the abundant sugars contained within. Complications arise from the need for extracellular localisation of cellulolytic enzymes, whether they be free or cell-associated. This review highlights the current progress in the consolidated bioprocessing approach, whereby microbial chassis are engineered to grow on lignocellulose as sole carbon sources whilst generating commercially useful chemicals. Future perspectives in the emerging biofoundry approach with bacterial hosts are discussed, where solutions to existing bottlenecks could potentially be overcome though the application of high throughput and iterative Design-Build-Test-Learn methodologies. These rapid automated pathway building infrastructures could be adapted for addressing the challenges of increasing cellulolytic capabilities of microorganisms to commercially viable levels.

A Case Study in Iterative Design

1998 ◽  
Vol 6 (1) ◽  
pp. 18-25 ◽  
Author(s):  
Pam Savage ◽  
Susan Pearsall
Keyword(s):  
Iterative Design

Mechanism Design and Simulation of the ULTRA Spine: A Tensegrity Robot

2015 ◽  
Author(s):  
Andrew P. Sabelhaus ◽  
Hao Ji ◽  
Patrick Hylton ◽  
Yakshu Madaan ◽  
ChanWoo Yang ◽  
...  
Keyword(s):  
Mechanism Design ◽  
Design Process ◽  
Inverse Kinematics ◽  
Gear Ratio ◽  
Forward Kinematics ◽  
Robot Design ◽  
Link Structure ◽  
Iterative Design ◽  
Quadruped Robots ◽  
Ongoing Effort

The Underactuated Lightweight Tensegrity Robotic Assistive Spine (ULTRA Spine) project is an ongoing effort to create a compliant, cable-driven, 3-degree-of-freedom, underactuated tensegrity core for quadruped robots. This work presents simulations and preliminary mechanism designs of that robot. Design goals and the iterative design process for an ULTRA Spine prototype are discussed. Inverse kinematics simulations are used to develop engineering characteristics for the robot, and forward kinematics simulations are used to verify these parameters. Then, multiple novel mechanism designs are presented that address challenges for this structure, in the context of design for prototyping and assembly. These include the spine robot’s multiple-gear-ratio actuators, spine link structure, spine link assembly locks, and the multiple-spring cable compliance system.

Sign in / Sign up

Export Citation Format

Share Document