The optimization of fracturing parameters of horizontal well under different reservoir conditions in tight sandstone gas reservoir

2015 ◽  
Author(s):  
Hua Wen ◽  
Na Sun
Keyword(s):  
Horizontal Well ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Reservoir Conditions

A set of seismic technology for optimizing horizontal well fracturing in tight sandstone gas reservoir

2020 ◽  
Author(s):  
Wang Yijun ◽  
Du Yubin ◽  
Guo Yabin ◽  
Zhang Linke ◽  
Gao Yang ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Tight Sandstone ◽  
Gas Reservoir

Study on Well Pattern Optimization of Tight Sandstone Gas Reservoir with the Strong Heterogeneity

2013 ◽  
Author(s):  
Ji Zhang ◽  
Tao Lu ◽  
Yuegang Li ◽  
Shuming Yu ◽  
Jingbu Li ◽  
...  
Keyword(s):  
Tight Sandstone ◽  
Gas Reservoir ◽  
Well Pattern ◽  
Well Pattern Optimization

Utilizing Microseismic to Monitor Fracture Geometry in a Horizontal Well in a Tight Sandstone Formation

2021 ◽  
Author(s):  
Abu M. Sani ◽  
Hatim S. AlQasim ◽  
Rayan A. Alidi
Keyword(s):  
Horizontal Well ◽  
Fracture Propagation ◽  
Horizontal Stress ◽  
Height Growth ◽  
Tight Sandstone ◽  
Fracture Geometry ◽  
Fracture Length ◽  
Sandstone Formation ◽  
Fracture Height ◽  
Maximum Horizontal Stress

Abstract This paper presents the use of real-time microseismic (MS) monitoring to understand hydraulic fracturing of a horizontal well drilled in the minimum stress direction within a high-temperature high-pressure (HTHP) tight sandstone formation. The well achieved a reservoir contact of more than 3,500 ft. Careful planning of the monitoring well and treatment well setup enabled capture of high quality MS events resulting in useful information on the regional maximum horizontal stress and offers an understanding of the fracture geometry with respect to clusters and stage spacing in relation to fracture propagation and growth. The maximum horizontal stress based on MS events was found to be different from the expected value with fracture azimuth off by more than 25 degree among the stages. Transverse fracture propagation was observed with overlapping MS events across stages. Upward fracture height growth was dominant in tighter stages. MS fracture length and height in excess of 500 ft and 100 ft, respectively, were created for most of the stages resulting in stimulated volumes that are high. Bigger fracture jobs yielded longer fracture length and were more confined in height growth. MS events fracture lengths and heights were found to be on average 1.36 and 1.30 times, respectively, to those of pressure-match.

Experiment on Mechanical Properties and Seepage Capability of Deep Tight Sandstone Under True-Triaxial Stresses Environment

2021 ◽  
Author(s):  
Jiaying Li ◽  
Chunyan Qi ◽  
Ye Gu ◽  
Yu Ye ◽  
Jie Zhao
Keyword(s):  
Mechanical Properties ◽  
In Situ Stress ◽  
Stress Sensitivity ◽  
Stress Conditions ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
True Triaxial ◽  
Strain Behavior ◽  
Triaxial Stresses

Abstract The characteristics of seepage capability and rock strain during reservoir depletion are important for reservoir recovery, which would significantly influence production strategy optimization. The Cretaceous deep natural gas reservoirs in Keshen Gasfield in Tarim Basin are mainly buried over 5000 m, featuring with ultra-low permeability, developed natural fractures and complex in-situ stress states. However, there is no comprehensive study on the variation of mechanical properties and seepage capability of this gas reservoir under in-situ stress conditions and most studies on stress-sensitivity are conducted under conventional triaxial or uniaxial stress conditions, which cannot truly represent in-situ stress environment. In this work, Cretaceous tight sandstone in Keshen Gasfield was tested under true-triaxial stresses conditions by an advanced geophysical imaging true-triaxial testing system to study the stress-sensitivity and anisotropy of rock stress-strain behavior, porosity and permeability. Four groups of sandstone samples are prepared as the size of 80mm×80mm×80mm, three of which are artificially fractured with different angle (0°,15°，30°) to simulate hydraulic fracturing. The test results corresponding to different samples are compared to further reveal the influence of the fracture angle on rock mechanical properties and seepage capability. The samples are in elastic strain during reservoir depletion, showing an apparent correlation with fracture angles. The porosity decreases linearly with stress loading, where the decrease rate of effective porosity of fracture samples is significantly higher than that of intact samples. The permeabilities decrease exponentially and show significant anisotropy in different principal stress directions, especially in σH direction. The mechanical properties and seepage capability of deep tight sandstone are successfully tested under true-triaxial stresses conditions in this work, which reveals the stress-sensitivity of anisotropic permeability, porosity and stress-strain behavior during gas production. The testing results proposed in this paper provides an innovative method to analyse rock mechanical and petrophysical properties and has profound significance on exploration and development of tight gas reservoir.

Sign in / Sign up

Export Citation Format

Share Document