The study on electrical power load-frequency control system using fuzzy logic controller

Author(s):  
Liu Ruitao
2014 ◽  
Vol 626 ◽  
pp. 219-226 ◽  
Author(s):  
Ajitha S. Priyadarsini ◽  
P. Melba Mary ◽  
N. Albert Singh

In this paper fuzzy logic based load frequency control (LFC) of two area power system in deregulated environment was studied. A two area system is considered in which all areas are interconnected by normal AC tie-lines. In the proposed system the effects of bilateral contracts between DISCOs and GENCOs are also considered. The performance of the fuzzy logic controller is tested on a deregulated two area load frequency control system for different operating conditions using MATLAB Simulink tool.


2018 ◽  
Vol 17 (1) ◽  
pp. 107
Author(s):  
Gusti Made Ngurah Christy Aryanata ◽  
I Nengah Suweden ◽  
I Made Mataram

A good electrical power system is a system that can serve the load in a sustainable and stable voltage and frequency. Changes in frequency occur due to the demand of loads that change from time to time. The frequency setting of the PLTG power system depends on the active power charge in the system. This active power setting is done by adjusting the magnitude of the generator drive coupling. The frequency setting is done by increasing and decreasing the amount of primary energy (fuel) and carried on the governor. Simulation in governor analysis study as load frequency control at PLTG using fuzzy logic controller is done by giving four types of cultivation that is 0,1 pu, 0,2pu, 0,3 pu and 0,4 pu. The simulation is done to compare the dynamic frequency response output and the resulting stability time using fuzzy logic controller with PI controller. Based on the results of comparative analysis conducted to prove that governor as load frequency control using fuzzy logic control is better than using PI controller. This can be seen from the output response frequency and time stability.


2018 ◽  
Vol 17 (2) ◽  
pp. 263
Author(s):  
Made Dwi Noviantara ◽  
I Nengah Suweden ◽  
I Made Mataram

The power system must be able to server the load in a sustainable manner with good service quality, such as constant voltage and frequency, quickly stabilized when load changes occur. The control generator automatically changes the frequency to the highest value when the system changes every time. This is called AGC. To keep the frequency in a stable state required frequency control system. Currently developing a lot of control system with fuzzy logic method. The simulation is performed using 5 membership functions and gives a loading of 0.1 pu, using MATLAB-Simulink software. From the analysis result, the comparison of output of frequency response in overshoot condition with conventional method yielded , settling time of 20.5 second. While the fuzzy logic controller method produces frequency response output in the overshoot state that is , settling time is 12 seconds. Whit the fuzzy logic controller method produces better performance and faster than conventional methods.


Sign in / Sign up

Export Citation Format

Share Document