scholarly journals Formulation, Optimization and in vitro Characterization of Stavudine Gastro Retentive Floating Matrix Tablets

2016 ◽  
Vol 8 (03) ◽  
Author(s):  
Mahendar Rupavath ◽  
Kranthi G. ◽  
Chinna Palem ◽  
K. S. K. Patnaik
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Weight Variation

The aim of the present investigation was to develop floating matrix tablets of stavudine to achieve prolong gastric residence time, leading to an increase in drug bioavailability and patient compliance. Floating tablets were prepared by wet granulation technique, using hydroxypropyl methylcellulose (HPMC K15M) as synthetic, pullulan gum as natural rate controlling polymers and optimum amounts of sodium-bicarbonate and citric acid as gas generating agents in suitable ratios to generate optimum buoyancy. Developed formulations were evaluated for weight variation, thickness, hardness, friability, drug content, in vitro drug release, floating lag time and floating buoyancy. All the formulations exhibited acceptable physical properties and the best formulation (F3) was selected based on in vitro characteristics. Further, the optimized formulation was evaluated for in vivo radiographic studies by incorporating BaSO4 as radio opaque substance. All the formulations were studied for in vitro drug release characteristics for 16 h. Optimized formulation showed controlled and prolonged drug release profiles while floating over the dissolution medium. Diffusion followed by erosion drug release mechanism was observed for the formulation, indicating that water diffusion and polymer erosion played an essential role in drug release. In vivo radiographic studies revealed that the tablets remained in the stomach for 8 ± 0.5 h in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered and desirable for absorption window drugs.

scholarly journals Development and evaluation of gastroretentive norfloxacin floating tablets

2009 ◽  
Vol 59 (2) ◽  
pp. 211-221 ◽  
Author(s):  
Ramesh Bomma ◽  
Rongala Swamy Naidu ◽  
Madhusudan Yamsani ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
Floating Tablets

Development and evaluation of gastroretentive norfloxacin floating tabletsFloating matrix tablets of norfloxacin were developed to prolong gastric residence time, leading to an increase in drug bioavailability. Tablets were prepared by the wet granulation technique, using polymers such as hydroxypropyl methylcellulose (HPMC K4M, HPMC K100M) and xanthan gum. Tablets were evaluated for their physical characteristics,viz., hardness, thickness, friability, and mass variation, drug content and floating properties. Further, tablets were studied forin vitrodrug release characteristics for 9 hours. The tablets exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. Non-Fickian diffusion was confirmed as the drug release mechanism from these tablets, indicating that water diffusion and polymer rearrangement played an essential role in drug release. The best formulation (F4) was selected based onin vitrocharacteristics and was usedin vivoradiographic studies by incorporating BaSO4. These studies revealed that the tablets remained in the stomach for 180 ± 30 min in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered desirable for the absorption window drugs.

scholarly journals Development and in vitro Characterization of Gastro Retentive Raft Forming Stavudine Tablets

2017 ◽  
Vol 9 (01) ◽  
Author(s):  
Mahendar Rupavath ◽  
K. S. K Rao
Keyword(s):  
Drug Release ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Release Mechanism ◽  
Compatibility Study ◽  
Drug Bioavailability ◽  
Drug Content ◽  
Weight Variation

The objective of the present investigation was to identify a suitable raft forming agent and to develop raft forming stavudine matrix tablets using different rate controlling natural, semi-synthetic and synthetic polymers to achieve prolonged gastric residence time, leading to an increase in drug bioavailability and patient compliance. Various raft forming agents were used in preliminary screening. Raft forming floating tablets were developed using pullulan gum as natural rate controlling polymer, and directly compressible grades of hydroxypropyl methylcellulose (Benecel K4M DC) as semi synthetic, and Carbopol 71G as synthetic rate controlling polymers respectively and optimum concentrations of sodium-bicarbonate as gas generating agent to generate optimum buoyancy by direct compression method. Raft forming tablets were evaluated for weight variation, thickness, hardness, friability, drug content, in vitro drug release, floating buoyancy and raft strength. Drug-excipients compatibility study showed no interaction between drug and excipients. Raft forming tablets showed satisfactory results when evaluated for weight variation, thickness, hardness, friability, drug content, and raft strength. The optimized formulation was selected based on physicochemical characteristics and in vitro drug dissolution characteristics. Further, the optimized formulation was evaluated for in vivo radiographic studies by incorporating BaSO4 as radio opaque substance. Optimized formulation showed controlled and prolonged drug release profiles while floating and raft formation over the dissolution medium. Diffusion followed by erosion with raft forming drug release mechanism was observed for the formulation, indicating that dissolution media diffusion and polymer erosion played an essential role in drug release. In vivo radiographic studies revealed that the raft forming formulations remained in the stomach for 240 30 min in rabbits and indicated that gastric retention time was increased by the floating and raft forming principle, which was considered and desirable for absorption window drugs.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Design, in vitro and in vivo Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets

1970 ◽  
Vol 9 (1) ◽  
pp. 3143-3149
Author(s):  
Sushma Appala ◽  
Ramesh Bomma ◽  
Kishan Veerabrahma
Keyword(s):  
Helicobacter Pylori ◽  
Drug Release ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Gastro Retentive

Objective of the investigation was to develop gastro retentive dosage form of gemifloxacin mesylate for local action in the stomach as it has antibacterial activity against Helicobacter pylori. Gemifloxacin mesylate is a synthetic broad-spectrum antibacterial agent for oral administration, having 7 hrs half-life and 71% oral bioavailability. In present study, gemifloxacin mesylate floating matrix tablets were prepared by direct compression method using polymers (HPMC K4M, HPMC K15M and polyox WSR 1105) and evaluated for various parameters like drug content, floating behavior (floating lag time and total floating time), in vitro drug release, swelling index, weight variation, friability, hardness and thickness. Sodium bicarbonate was incorporated as gas generating agent in all formulations. Drug-excipients compatibility was studied by Differential Scanning Calorimetry. Results have shown that the amount of polymer in the formulation affected the drug release. Optimized formulation (F8 containing polyox WSR1105 as release retarding agent) was selected based on in vitro drug release, floating lag time, floating time and other parameters. This formulation followed zero order kinetics and non-Fickian mechanism of drug release. In vivo radiographic study was conducted in healthy human volunteers using tablets containing BaSO4 as radio opaque agent. The average residence time was found to be 4.5± 0.86 h (n=3). This design of gastro retentive drug delivery system helps in increasing the local delivery of drug in patients with Helicobacter pylori infection

scholarly journals Formulation and In-Vitro Evaluation of Sustained Release Matrix Tablets of Domperidone

2020 ◽  
Vol 8 (02) ◽  
pp. 40-45
Author(s):  
Chhitij Thapa ◽  
Roma Chaudhary
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Epigastric Pain ◽  
Matrix Tablets ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
In Vitro Drug Release ◽  
Weight Variation

INTRODUCTION Domperidone is a unique compound with gastro kinetic and antiemetic effects. It is used in the management of disorder by impaired motility like gastroesophageal reflux (in some instances), gastroparesis, dyspepsia, heartburn, epigastric pain, nausea, vomiting, and colonic inertia. The sustained release system is a widely accepted approach for slow drug release over an extended period to address the challenges of conventional oral delivery, including dosing frequency, drug safety, and efficacy. The study aims to formulate a domperidone sustained release tablet and compare the dissolution rate with the marketed formulations. MATERIAL AND METHODS Sustained release matrix tablets of domperidone were prepared by wet granulation method using different polymers such as HPMC K4M, ethyl cellulose, Gum acacia. Pre-compression studies like angle of repose, bulk density, tapped density, Carr's index, and Hausner’s ratio, and post-compression studies like weight variation, thickness, hardness, friability, drug content, and in-vitro drug release were evaluated.   RESULTS The release profile of domperidone sustained-release tablets was studied spectrophotometrically. The in-vitro dissolution study suggests the minimum %-cumulative drug release with 98.33% in F5. The %-cumulative drug release was maximum in F3 with 99.69%. The in-vitro drug release of all the formulations was non-significant compared to the marketed formulation (p<0.05), exhibiting the sustained-release property by all the formulations. CONCLUSION The pre-compression study concludes the better flow property of the granules of different formulations. The sustained release domperidone tablets were prepared successfully by the wet granulation method. The post-compression parameters of different formulations were within the acceptable range.

scholarly journals FORMULATION AND CHARACTERIZATION OF SUSTAINED RELEASE TABLET USING MARDI GUM

2021 ◽  
pp. 52-55
Author(s):  
MANGESH M KUMARE ◽  
GIRIDHAR R SHENDARKAR
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Sustained Release Tablet ◽  
Weight Variation ◽  
Release Tablet

Objective: The present research work was to develop and evaluate alprazolam sustained release tablet using Mardi gum, a comparative study on binding properties of gum and hydroxypropyl methylcellulose (HPMC) was performed. Methods: Formulation of alprazolam tablets (f1–f6) was done by direct compression method using 15%, 30%, and 45% concentration of gum as a natural binder, and HPMC was used as synthetic matrix forming agent. Microcrystalline cellulose was used as diluents, talc, and magnesium stearate as a lubricant and PVP K30 as the binder. The formulated batches were evaluated for parameters such as tablet thickness, % friability, hardness, weight variation, and in vitro drug release characteristics. The release information was fitted into different dynamics models to decide the release mechanism of the drug. Results: The results showed that all the parameters of the developed tablets (f1–f6) were in fulfillment with pharmacopeia limits. In vitro, drug release studies showed that formulation f1 had most controlled and sustained manner releaser with maximum drug release of 97.89±0.52% in 18 h with comparison to f2–f4 and f6 drug release is 98.12±0.55%, 97.24±0.57%, 98.16±0.74%, and 97.26±0.35%, respectively, in 16 h and f5 giving 97.89±0.85% release in 14 h. Conclusion: On the basis of obtained result, it can be concluded that Mardi gum can be used to sustain the drug release as a natural polymer in tablet dosage form.

scholarly journals FORMULATION AND EVALUATION OF ORODISPERSIBLE TABLETS OF DONEPEZIL HYDROCHLORIDE

2020 ◽  
pp. 45-51
Author(s):  
P. V. KAMALA KUMARI ◽  
Y. SRINIVASA RAO
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Wet Granulation ◽  
High Concentration ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Orodispersible Tablets ◽  
Weight Variation ◽  
Donepezil Hydrochloride

Objective: The present study was aimed to develop the formulation and in vitro evaluation of Orodispersible tablets by wet granulation method using Donepezil HCl as a model drug to enhance patient compliance. Methods: In the wet granulation method, a mixture of microcrystalline cellulose and hydroxypropyl methylcellulose were used along with superdisintegrants, i.e., croscarmellose sodium and crospovidone. The prepared granules were subjected to both pre and post-compression evaluation parameters including; FTIR spectroscopy, micromeritics properties, tablet weight variation, hardness, friability, drug content, disintegration time and in vitro drug release. Results: FTIR studies indicated that there was nointeraction between the drug and the excipients used. The formulation containing high concentration of crospovidone and mixture as the best formulation F2 based on in vitro drug release characteristics of tablet formulation. Conclusion: The results of this work suggested that orodispersible tablets of Donepezil hydrochloride with rapid disintegration time, fast drug release and good hardness can be efficiently and successfully formulated by wet granulation method.

scholarly journals FORMULATION AND CHARACTERIZATION OF MATRIX TABLETS USING MUCILAGE OF TINOSPORA CORDIFOLIA AS NATURAL BINDER

2018 ◽  
Vol 10 (7) ◽  
pp. 22
Author(s):  
Reecha Madaan ◽  
Rajni Bala ◽  
Tejeswini Vasisht ◽  
Ritima Sharma ◽  
Shivali Garg
Keyword(s):  
Drug Release ◽  
Diclofenac Sodium ◽  
Research Work ◽  
Matrix Tablets ◽  
Tinospora Cordifolia ◽  
Release Mechanism ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Weight Variation

Objective: The present research work was to formulate matrix tablets of diclofenac sodium using mucilage extracted from Tinospora cordifolia as a novel binding agent. Also, a comparative study on binding properties of mucilage and carbopol were performed.Methods: Fresh stems of Tinospora cordifolia were collected and mucilage was extracted out using standard method. The isolated mucilage was characterised for physicochemical parameters. Formulation of diclofenac sodium tablets (f1-f6) was done by dry granulation method using 2%, 4%, 6%, 8% and 10% concentration of mucilage of Tinospora cardifolia as natural binder. Carbopol 2% was used as synthetic matrix forming agent. Microcrystalline cellulose was used as diluents, magnesium stearate and talc as lubricant. The formulated tablets were evaluated for parameters such as tablet thickness, hardness, weight variation, disintegration time, percent friability and in vitro drug release characteristics. The drug release mechanism was determined by fitting the release data into different kinetics models.Results: The results revealed that all the pre and post compression parameters of the formulated tablets (f1-f6) were in compliance with pharmacopoeial limits. In vitro drug release studies showed that formulation f6 containing maximum concentration of mucilage release the drug in a most controlled and sustained manner with maximum drug release of 63.6% in 15 h in comparison with f1(2% carbopol) giving 80% release and was found to be stable for 3 mo as indicated by stability studies. The mechanism of drug releases from formulation f1-f6 was found to be polymer disentanglement and erosion. Preformulation studies using FTIR study reveals that there is no incompatibility between the pure drug and mucilage of tinospora cardifolia used.Conclusion: Based on the experimental findings it can be concluded that Tinospora cordifolia mucilage can be used as a release retardant agent in the formulation of sustained release dosage forms.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

Sign in / Sign up

Export Citation Format

Share Document