Effects of HCl hydrolyzed cellulose nanocrystals from waste papers on the Hydroxypropyl methylcellulose/Cationic Starch biofilms

ABSTRACT The study reports on the preparation of nanocrystalline cellulose from waste papers (WPNCC), as an environmental friendly approach of source material and investigation of their effects on the morphological, mechanical and barrier properties of the Hydroxypropyl methylcellulose/Cationic starch (HPMC/CS) nanocomposites. HCl hydrolysis followed by alkali treatment and deinking of the fibers resulted in the production of WPNCC. The TEM results confirmed the rod like shape of WPNCC; the average diameter was 22± 7 nanometers and the length was 125± 25 nanometers. The hydrolysis yield was 65% with high crystallinity index of 79.6%. The results of X-ray diffraction confirmed the successfully production of WPNCC and their effective presence in the HPMC/CS matrix. The homogeneity of WPNCC dispersion in the polymer matrix was approved by FESEM analysis. The WPNCC also did not affect the nanocomposites optical clarity. The optimum amount of 9 wt% WPNCC, showed the highest barrier, mechanical and biodegradablility properties.

The utility of contact lens-assisted corneal cross-linking (CACXL) in progressive keratoconus patients with thin corneas

Purpose To evaluate efficacy and safety of contact lens-assisted corneal cross-linking (CACXL) among progressive keratoconus patients with thin corneas. Setting Private eye hospital Design Cross-sectional study Methods Thirty-six eyes of 36 consecutive patients with progressive keratoconus and thinnest corneal thickness of 380–400 µm after epithelium removal were included. CACXL was performed based on use of a dextran-free isotonic (>0.1%) riboflavin solution with hydroxypropyl methylcellulose (HPMC, 1.1%) after epithelial removal and placement of a riboflavin-soaked contact lens without an ultraviolet filter on the cornea and ultraviolet irradiance. Data on best distance corrected (CDVA) and uncorrected (UDVA) visual acuity, manifest sphere (D), manifest cylinder (D), K1 (D), K2 (D), mean keratometry (D) and Kmax (D) values, endothelial cell count and mean depth of demarcation line were recorded preoperatively and at the postoperative 1-year Results Post-operative 1-year data revealed significant increases in UDVA (0.23 ± 0.15 vs. 0.17 ± 0.13 D, p < 0.001) and CDVA (0.44 ± 0.18 vs. 0.36 ± 0.17 D, p < 0.001) values and a significant reduction in the mean Kmax (from 56 ± 3.3D to 55 ± 3.2 D, p < 0.001), K2 (from 49.7 ± 3.2 D to 49.52 ± 3.11 D, p = 0.049), manifest sphere (from −1.93 ± 2.21 D to −1.55 ± 2.02 D, p = 0.001) and manifest cylinder (from −2.83 ± 1.67 D to −2.39 ± 1.36 D, p < 0.001) values along with a similar endothelial cell count. The mean depth of demarcation line was mean 230 (SD17.05, range 200 to 262) at postoperative 1-month. Conclusions Our findings indicate favourable 1-year postoperative outcome of CACXL in progressive keratoconus patients with thin cornea in terms of improved visual acuity and keratectasia status as well as endothelial safety.

Clozapine-Encapsulated Binary Mixed Micelles in Thermosensitive Sol–Gels for Intranasal Administration

(1) Background: Clozapine is the most effective antipsychotic. It is, however, associated with many adverse drug reactions. Nose-to-brain (N2B) delivery offers a promising approach. This study aims to develop clozapine-encapsulated thermosensitive sol–gels for N2B delivery. (2) Methods: Poloxamer 407 and hydroxypropyl methylcellulose were mixed and hydrated with water. Glycerin and carbopol solutions were added to the mixture and stirred overnight at 2–8 °C. Clozapine 0.1% w/w was stirred with polysorbate 20 (PS20) or polysorbate 80 (PS80) at RT (25 °C) before being added to the polymer solution. The final formulation was made to 10 g with water, stirred overnight at 2–8 °C and then adjusted to pH 5.5. (3) Results: Formulations F3 (3% PS20) and F4 (3% PS80) were selected for further evaluation, as their gelation temperatures were near 28 °C. The hydrodynamic particle diameter of clozapine was 18.7 ± 0.2 nm in F3 and 20.0 ± 0.4 nm in F4. The results show a crystallinity change in clozapine to amorphous. Drug release studies showed a 59.1 ± 3.0% (F3) and 53.1 ± 2.7% (F4) clozapine release after 72 h. Clozapine permeated after 8 h was 20.8 ± 3.0% (F3) and 17.8 ± 3.1% (F4). The drug deposition was higher with F4 (144.8 ± 1.4 µg/g) than F3 (110.7 ± 2.7 µg/g). Both sol–gels showed no phase separation after 3 months. (4) Conclusions: Binary PS80-P407 mixed micelles were more thermodynamically stable and rigid due to the higher synergism of both surfactants. However, binary mixed PS20-P407 micelles showed better drug permeation across the nasal mucosa tissue and may be a preferable carrier system for the intranasal administration of clozapine.

Morphology and Rheology of a Cool-Gel (Protein) Blended with a Thermo-Gel (Hydroxypropyl Methylcellulose)

This study investigates the morphological and rheological properties of blended gelatin (GA; a cooling-induced gel (cool-gel)) and hydroxypropyl methylcellulose (HPMC; a heating-induced gel (thermo-gel)) systems using a fluorescence microscope, small angle X-ray scattering (SAXS), and a rheometer. The results clearly indicate that the two biopolymers are immiscible and have low compatibility. Moreover, the rheological behavior and morphology of the GA/HPMC blends significantly depend on the blending ratio and concentration. Higher polysaccharide contents decrease the gelling temperature and improve the gel viscoelasticity character of GA/HPMC blended gels. The SAXS results reveal that the correlation length (ξ) of the blended gels decreases from 5.16 to 1.89 nm as the HPMC concentration increases from 1 to 6%, which suggests that much denser networks are formed in blended gels with higher HPMC concentrations. Overall, the data reported herein indicate that the gel properties of gelatin can be enhanced by blending with a heating-induced gel.

The Investigation of Thymol Formulations Containing Poloxamer 407 and Hydroxypropyl Methylcellulose to Inhibit Candida Biofilm Formation and Demonstrate Improved Bio-Compatibility

The aim of this study was to investigate the potential of thymol to inhibit Candida biofilm formation and improve thymol biocompatibility in the presence of hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (P407), as possible drug carriers. Thymol with and without polymers were tested for its ability to inhibit biofilm formation, its effect on the viability of biofilm and biocompatibility studies were performed on HEK 293 (human embryonic kidney) cells. Thymol showed a concentration dependent biofilm inhibition; this effect was slightly improved when it was combined with HPMC. The Thymol-P407 combination completely inhibited the formation of biofilm and the antibiofilm effect of thymol decreased as the maturation of Candida biofilms increased. The effect of thymol on HEK 293 cells was a loss of nearly 100% in their viability at a concentration of 250 mg/L. However, in the presence of P407, the viability was 25% and 85% using neutral red uptake and sulforhodamine B assays, respectively. While, HPMC had less effect on thymol activity the thymol-P407 combination showed a superior inhibitory effect on biofilm formation and better biocompatibility with human cell lines. The combination demonstrates a potential medical use for the prevention of Candida biofilm formation.

Effect of NaBr on the Structural, Thermal and Mechanical Properties of HPMC:NaBr Composite Films

The hydroxypropyl methylcellulose (HPMC):sodium bromide (NaBr) composite films were prepared using different concentrations by solution casting method. The crystalline percentage of the pure HPMC was reduced from 74% to 60% upon the incorporation of 0.7 wt.% of NaBr salt, which suggests that the NaBr salt disrupted the host polymer crystalline phase. The two-phase microstructure in the morphological images reflects the phase separation at different concentrations of dopant. The functional studies revealed the considerable variation of intensity and the shift of peaks due to the action of NaBr in the host polymer matrix. The HPMC showed a large increase in the glass transition temperature (Tg) from 65 ºC to 86 ºC and simultaneously reduction in the weight percent loss was observed. The mechanical analysis revealed that the added dopant has a significant effect on the mechanical properties of HPMC.