Optimized Rational Dispersion Relation Preserving (R-DRP) Method for High-Accuracy Flow Simulations

2019 ◽  
Author(s):  
Duane R. Hixon
2011 ◽  
Vol 43 (1) ◽  
pp. 90-97 ◽  
Author(s):  
T.-H. Lê ◽  
J.-M. Le Gouez ◽  
E. Garnier

Author(s):  
Гаяз Салимович Хакимзянов ◽  
Зинаида Ивановна Федотова ◽  
Денис Дутых

Построена полностью нелинейная слабо дисперсионная модель волновой гидродинамики четвертого порядка длинноволновой аппроксимации. За скорость в модели взята усредненная по глубине горизонтальная составляющая скорости трехмерного течения. Учтена подвижность дна. Выполненная модификация модели обеспечивает шестой и восьмой порядки точности аппроксимации дисперсионного соотношения трехмерной модели потенциальных течений. In the numerical simulation of medium-length surface waves in the framework of nonlinear dispersive (NLD) models, an increased accuracy of reproducing the characteristics of the simulated processes is required. A number of works (Kirby (2016), e.g.) describe approaches to improve the known NLD-models. In particular, NLD-models of the fourth order of the long-wave approximation have been proposed and, based on a comparison of numerical results with experimental data, their high accuracy has been demonstrated (Ataie-Ashtiani and Najafi-Jilani (2007); Zhou and Teng (2010)). In these new models, the horizontal component of the velocity vector of the threedimensional (FNPF-) model of potential flows at a certain surface located between the bottom and the free boundary was chosen as the velocity vector. The result was a very cumbersome form of equations. In addition, the laws of conservation of mass and momentum do not hold for these models. The main result of this work is the derivation of a two-parameter fully nonlinear weakly dispersive (mSGN4) model of the fourth order of the long-wave approximation, which is a generalization of the well-known Serre-Green-Naghdi (SGN) second order model. In the derivation, the velocity averaged over the thickness of the liquid layer was used. The assumption about the potentiality of the three-dimensional flow was used only at the stage of closing the model. The movement of the bottom is taken into account. For the derived model, the law of conservation of mass is satisfied, and the law of conservation of total momentum is satisfied in the case of a horizontal stationary bottom. The equations of the mSGN4-model are invariant under the Galilean transformation and are presented in a compact form similar to the equations of gas dynamics. The dispersion relation of the mSGN4-model has the fourth order of accuracy in the long wave region and satisfactorily approximates the dispersion relation of the FNPF-model in the short wave region. Moreover, with a special choice of the values of the model parameters, an increased accuracy of approximating the dispersion relation of the FNPF-model at long waves (sixth or eighth order) is achieved. Analysis of the deviations of the values of the phase velocity of the mSGN4 model from the values of the “reference” speed of the FNPF model in the entire wavelength range showed that the most preferable is the mSGN4 model with the parameter values corresponding to the Pad’e approximant (2,4).


Geophysics ◽  
2017 ◽  
Vol 82 (5) ◽  
pp. T237-T248 ◽  
Author(s):  
Zhikai Wang ◽  
Jingye Li ◽  
Benfeng Wang ◽  
Yiran Xu ◽  
Xiaohong Chen

Explicit finite-difference (FD) methods with high accuracy and efficiency are preferred in full-waveform inversion and reverse time migration. The Taylor-series expansion (TE)-based FD methods can only obtain high accuracy on a small wavenumber zone. We have developed a new explicit FD method with spatial arbitrary even-order accuracy based on the mixed [Formula: see text] (wavenumber)-space domain function approximation for the acoustic wave equation, and we derived the FD coefficients by minimizing the approximation error in a least-squares (LS) sense. The weighted pseudoinverse of mixed [Formula: see text]-space matrix is introduced into the LS optimization problem to improve the accuracy. The new method has an exact temporal derivatives discretization in homogeneous media and also has higher temporal and spatial accuracy in heterogeneous media. Approximation errors and numerical dispersion analysis demonstrate that the new FD method has a higher numerical accuracy than conventional TE-based FD and TE-based time-space domain dispersion-relation FD methods. Stability analysis reveals that our proposed method requires a slightly stricter stability condition than the TE-based FD and TE-based time-space domain dispersion-relation FD methods. Numerical tests in the homogeneous model, horizontally layered model, and 2D modified Sigsbee2 model demonstrate the accuracy, efficiency, and flexibility of the proposed new FD method.


2014 ◽  
Vol 25 (12) ◽  
pp. 1441003 ◽  
Author(s):  
Andrea Montessori ◽  
Michele La Rocca ◽  
Giacomo Falcucci ◽  
Sauro Succi

The regularized lattice BGK (RLBGK) is validated against high-accuracy spectral Chebyshev methods for lid-driven cavity flows. RLBGK is shown to provide a viable alternative to standard lattice BGK schemes, with significant enhancement of numerical stability at a very moderate computational extra-cost.


2008 ◽  
Vol 06 (01) ◽  
pp. 23-49 ◽  
Author(s):  
WILLIAM LAYTON ◽  
ROGER LEWANDOWSKI

In 1934, J. Leray proposed a regularization of the Navier–Stokes equations whose limits were weak solutions of the Navier–Stokes equations. Recently, a modification of the Leray model, called the Leray-alpha model, has attracted interest for turbulent flow simulations. One common drawback of the Leray type regularizations is their low accuracy. Increasing the accuracy of a simulation based on a Leray regularization requires cutting the averaging radius, i.e. remeshing and resolving on finer meshes. This article analyzes on a family of Leray type models of arbitrarily high orders of accuracy for a fixed averaging radius. We establish the basic theory of the entire family including limiting behavior as the averaging radius decreases to zero (a simple extension of results known for the Leray model). We also give a more technically interesting result on the limit as the order of the models increases with a fixed averaging radius. Because of this property, increasing the accuracy of the model is potentially cheaper than decreasing the averaging radius (or meshwidth) and high order models are doubly interesting.


Author(s):  
M. Nishigaki ◽  
S. Katagiri ◽  
H. Kimura ◽  
B. Tadano

The high voltage electron microscope has many advantageous features in comparison with the ordinary electron microscope. They are a higher penetrating efficiency of the electron, low chromatic aberration, high accuracy of the selected area diffraction and so on. Thus, the high voltage electron microscope becomes an indispensable instrument for the metallurgical, polymer and biological specimen studies. The application of the instrument involves today not only basic research but routine survey in the various fields. Particularly for the latter purpose, the performance, maintenance and reliability of the microscope should be same as those of commercial ones. The authors completed a 500 kV electron microscope in 1964 and a 1,000 kV one in 1966 taking these points into consideration. The construction of our 1,000 kV electron microscope is described below.


Sign in / Sign up

Export Citation Format

Share Document