Withdrawal: The Effect of Swirl Intensity on Spray Characteristics in Single Element Lean Direct Injection Combustor

Author(s):  
Le Li ◽  
Jianqin Suo ◽  
Dinghuan Xu ◽  
Hongxia Liang ◽  
Longxi Zheng
2014 ◽  
Author(s):  
Cheng Huang ◽  
Rohan Gejji ◽  
William Anderson ◽  
Changjin Yoon ◽  
Venkateswaran Sankaran

Author(s):  
Robert Tacina ◽  
Changlie Wey ◽  
Peter Laing ◽  
Adel Mansour

Results of a low-NOx combustor test with a 15° sector are presented. A multipoint, lean-direct injection concept is used. The configuration tested has 36 fuel injectors and fuel-air mixers in place of a dual annular arrangement of two conventional fuel injectors. An integrated-module approach is used for the construction where chemically etched laminates that are diffusion bonded, combine the fuel injectors, air swirlers and fuel manifold into a single element. Test conditions include inlet temperatures up to 866K, and inlet pressures up to 4825 kPa. The fuel used was Jet A. A correlation is developed relating the NOx emissions to the inlet temperature, inlet pressure, and fuel-air ratio. Using a hypothetical 55:1 pressure-ratio engine, cycle NOx emissions are estimated to be less than 40% of the 1996 ICAO standard.


2019 ◽  
Vol 192 (12) ◽  
pp. 2371-2398 ◽  
Author(s):  
Cheng Huang ◽  
Rohan Gejji ◽  
William Anderson ◽  
Changjin Yoon ◽  
Venkateswaran Sankaran

2018 ◽  
Vol 11 ◽  
pp. 175682771878585 ◽  
Author(s):  
Rohan M Gejji ◽  
Cheng Huang ◽  
Christopher Fugger ◽  
Changjin Yoon ◽  
William Anderson

Self-excited combustion dynamics in a liquid-fueled lean direct injection combustor at high pressure (1 MPa) are described. Studied variables include combustor and air plenum length, inlet air temperature, equivalence ratio, fuel nozzle location, and fuel composition. Measured pressure oscillations were dependent on combustor geometry and ranged from about 1% of mean chamber pressure at low equivalence ratio, up to 20% at high equivalence ratio. In the most unstable cases, strong pressure modes were measured throughout the frequency spectrum including a band around 1.2–1.5 kHz representing the 4th longitudinal mode, and another band around 7 kHz. The oscillation amplitudes have a non-monotonic dependency on air temperature, and are affected by the placement of the fuel nozzle relative to the throat of the subsonic swirling air flow. The parametric survey provides a rich dataset suitable for validating high-fidelity simulations and their subsequent use in analyzing and interpreting the complex combustion dynamics.


Energies ◽  
2018 ◽  
Vol 11 (6) ◽  
pp. 1603 ◽  
Author(s):  
Han Yu ◽  
Pengfei Zhu ◽  
Jianqin Suo ◽  
Longxi Zheng

Sign in / Sign up

Export Citation Format

Share Document