Aerodynamic Characteristics and Topology of Interfering Vortex Systems at Hybrid Delta Wings

2022 ◽  
Author(s):  
Dominik Sedlacek ◽  
Christian Breitsamter
1973 ◽  
Vol 24 (2) ◽  
pp. 120-128 ◽  
Author(s):  
J E Barsby

SummarySolutions to the problem of separated flow past slender delta wings for moderate values of a suitably defined incidence parameter have been calculated by Smith, using a vortex sheet model. By increasing the accuracy of the finite-difference technique, and by replacing Smith’s original nested iteration procedure, to solve the non-linear simultaneous equations that arise, by a Newton’s method, it is possible to extend the range of the incidence parameter over which solutions can be obtained. Furthermore for sufficiently small values of the incidence parameter, new and unexpected results in the form of vortex systems that originate inboard from the leading edge have been discovered. These new solutions are the only solutions, to the author’s knowledge, of a vortex sheet leaving a smooth surface.Interest has centred upon the shape of the finite vortex sheet, the position of the isolated vortex, and the lift, and variations of these quantities are shown as functions of the incidence parameter. Although no experimental evidence is available, comparisons are made with the simpler Brown and Michael model in which all the vorticity is assumed to be concentrated onto an isolated line vortex. Agreement between these two models becomes very close as the value of the incidence parameter is reduced.


1977 ◽  
Vol 11 (6) ◽  
pp. 904-908 ◽  
Author(s):  
A. L. Gonor ◽  
V. V. Kravets ◽  
A. I. Shvets

2016 ◽  
Vol 06 (02) ◽  
pp. 101-118
Author(s):  
Shigeru Ogawa ◽  
Jumpei Takeda ◽  
Taiki Kawate ◽  
Keita Yano

1967 ◽  
Vol 71 (676) ◽  
pp. 319-322 ◽  
Author(s):  
D. Hummel ◽  
P. S. Srinivasan

Even at small angles of incidence, the flow separates from the sharp leading edges of a slender wing. These flow separations usually lead to the formation of two free vortex layers, joined to the leading edges of the wing and rolling up to form spiral-shaped vortex sheets above the upper surface of the wing. This vortex formation is illustrated schematically in Fig. 1. The streamlines on the vortex sheet follow helical paths. Smoke injected near the wing apex for flow visualisation remains concentrated close to the axis of the core of the vortex sheet.


2011 ◽  
Vol 274 ◽  
pp. 43-52
Author(s):  
I. Boumrar ◽  
A. Ouibrahim

Experiments were conducted on thin delta wings to investigate, for subsonic flow, the effect of both privileged apex angle values and the wing-fuselage interactions on the aerodynamic characteristics, i.e. the distribution of the defect pressure on the extrados, the drag and the lift coefficients. For this purpose, several delta wing models of various apex angle (β = 75, 80 and 85°) were realized and tested without and with fuselages of cylindrical form, with diameters of 20 and 30 mm, downstream the apex and appropriately disposed on the extrados. The impact of the apex angle as well as the interaction on the defect pressure were specially considered along the apex vortices where the pressure defect is usually maximum. The above mentioned effects were investigated via the variations of the mean velocity in the wind tunnel and the incidence (attack) angle.


Sign in / Sign up

Export Citation Format

Share Document