Shaped Memory Polymer: An Innovative Approach to Sand Control Open Hole Completion in Thin, Multilayered, Depleted Low Permeability Gas Reservoirs

Author(s):  
Jason Fuxa ◽  
Paolo Di Giampaolo ◽  
Giovanni Ferrara ◽  
Mario Di Pietro ◽  
Marco Sportelli ◽  
...  
2019 ◽  
Author(s):  
Jason Fuxa ◽  
Paolo Di Giampaolo ◽  
Giovanni Ferrara ◽  
Mario Di Pietro ◽  
Marco Sportelli ◽  
...  

2013 ◽  
Vol 734-737 ◽  
pp. 1317-1323
Author(s):  
Liang Dong Yan ◽  
Zhi Juan Gao

Low-permeability gas reservoirs are influenced by slippage effect (Klinkenberg effect) , which leads to the different of gas in low-permeability and conventional reservoirs. According to the mechanism and mathematical model of slippage effect, the pressure distribution and flow state of flow in low-permeability gas reservoirs, and the capacity of low-permeability gas well are simulated by using the actual production datum.


2000 ◽  
Author(s):  
B.S. Hart ◽  
R.A. Pearson ◽  
J.M. Herrin ◽  
T. Engler ◽  
R.L. Robinson

2014 ◽  
Author(s):  
Yu Didier Ding ◽  
Yu-Shu Wu ◽  
Nicolas Farah ◽  
Cong Wang ◽  
Bernard Bourbiaux

PLoS ONE ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. e0250466
Author(s):  
Fahd Saeed Alakbari ◽  
Mysara Eissa Mohyaldinn ◽  
Mohammed Abdalla Ayoub ◽  
Ali Samer Muhsan ◽  
Ibnelwaleed A. Hussein

Sand management is essential for enhancing the production in oil and gas reservoirs. The critical total drawdown (CTD) is used as a reliable indicator of the onset of sand production; hence, its accurate prediction is very important. There are many published CTD prediction correlations in literature. However, the accuracy of most of these models is questionable. Therefore, further improvement in CTD prediction is needed for more effective and successful sand control. This article presents a robust and accurate fuzzy logic (FL) model for predicting the CTD. Literature on 23 wells of the North Adriatic Sea was used to develop the model. The used data were split into 70% training sets and 30% testing sets. Trend analysis was conducted to verify that the developed model follows the correct physical behavior trends of the input parameters. Some statistical analyses were performed to check the model’s reliability and accuracy as compared to the published correlations. The results demonstrated that the proposed FL model substantially outperforms the current published correlations and shows higher prediction accuracy. These results were verified using the highest correlation coefficient, the lowest average absolute percent relative error (AAPRE), the lowest maximum error (max. AAPRE), the lowest standard deviation (SD), and the lowest root mean square error (RMSE). Results showed that the lowest AAPRE is 8.6%, whereas the highest correlation coefficient is 0.9947. These values of AAPRE (<10%) indicate that the FL model could predicts the CTD more accurately than other published models (>20% AAPRE). Moreover, further analysis indicated the robustness of the FL model, because it follows the trends of all physical parameters affecting the CTD.


2007 ◽  
pp. 107-122
Author(s):  
Liz George ◽  
L. Morris ◽  
S. Daniel ◽  
B. Lunwitz ◽  
M. E. Braday ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document