open hole
Recently Published Documents


TOTAL DOCUMENTS

1090
(FIVE YEARS 333)

H-INDEX

30
(FIVE YEARS 7)

Geosciences ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 35
Author(s):  
Katja E. Schulz ◽  
Kristian Bär ◽  
Ingo Sass

A hydrothermal doublet system was drilled in a fault-related granitic reservoir in Cornwall. It targets the Porthtowan Fault Zone (PTF), which transects the Carnmenellis granite, one of the onshore plutons of the Cornubian Batholith in SW England. At 5058 m depth (TVD, 5275 m MD) up to 190 °C were reached in the dedicated production well. The injection well is aligned vertically above the production well and reaches a depth of 2393 m MD. As part of the design process for potential chemical stimulation of the open-hole sections of the hydrothermal doublet, lab-scale acidification experiments were performed on outcrop analogue samples from the Cornubian Batholith, which include mineralised veins. The experimental setup comprised autoclave experiments on sample powder and plugs, and core flooding tests on sample plugs to investigate to what degree the permeability of natural and artificial (saw-cut) fractures can be enhanced. All samples were petrologically and petrophysically analysed before and after the acidification experiments to track all changes resulting from the acidification. Based on the comparison of the mineralogical composition of the OAS samples with the drill cuttings from the production well, the results can be transferred to the hydrothermally altered zones around the faults and fractures of the PTF. Core Flooding Tests and Autoclave Experiments result in permeability enhancement factors of 4 to >20 and 0.1 to 40, respectively. Mineral reprecipitation can be avoided in the stimulated samples by sufficient post-flushing.


2022 ◽  
Vol 8 ◽  
Author(s):  
Hanjie Hu ◽  
Bing Du ◽  
Wenkai Jiang ◽  
Changqi Zheng ◽  
Ning Zhu ◽  
...  

In this study, a type of tube with an open-hole AL alloy tube nested outside the CFRP tube is designed and fabricated, and the energy absorbing characteristics and failure mechanism under quasi-static axial compression are discussed. It is found that the summing tube composed of two single tubes has less energy absorption than the hybrid tube. Numerical simulation and theoretical models are used to evaluate the influence of the hybrid tube in terms of cost and weight, and it is found that under the same energy absorption, the hybrid tube has a weight reduction of 39.2% compared to the open-hole AL tube, which was 25.7% of the cost of the CFRP tube. This hybrid structure has potential as the load-carrying and energy absorption tube.


Author(s):  
M. Nguyen-Hoang ◽  
W. Becker

AbstractOpen circular holes are an important design feature, for instance in bolted joint connections. However, stress concentrations arise whose magnitude depends on the material anisotropy and on the defect size relative to the outer finite plate dimensions. To design both safe and light-weight optimal structures, precise means for the assessment are crucial. These can be based on analytical methods providing efficient computation. For this purpose, the focus of the present paper is to provide a comprehensive stress and failure analysis framework based on analytical methods, which is also suitable for use in industry contexts. The stress field for the orthotropic finite-width open-hole problem under uniform tension is derived using the complex potential method. The results are eventually validated against Finite-Element analyses revealing excellent agreement. Then, a failure analysis to predict brittle crack initiation is conducted by means of the Theory of Critical Distances and Finite Fracture Mechanics. These failure concepts of different modelling complexity are compared to each other and validated against experimental data. The size effect is captured, and in this context, the influence of finite width on the effective failure load reduction is investigated.


2022 ◽  
Vol 25 ◽  
Author(s):  
Harlei Augusto Bueno Alves ◽  
Francisco Maciel Monticeli ◽  
Carolina Machado Martinelli Lobo ◽  
Marcos Yutaka Shiino

Author(s):  
Haoqi Zhang ◽  
Aonan Li ◽  
Jiang Wu ◽  
Bingyu Sun ◽  
Chun Wang ◽  
...  

2022 ◽  
pp. 115244
Author(s):  
Braedon Hoekstra ◽  
Atefeh Shekarian ◽  
Kamal Kolasangiani ◽  
Donatus C.D. Oguamanam ◽  
Redouane Zitoune ◽  
...  

2021 ◽  
Vol 54 (2F) ◽  
pp. 48-61
Author(s):  
Walaa Khyrie ◽  
Ayad Alrazzaq

The oil and gas industry, wellbore instability plays an important role in financial losses and stops the operations while the drilling which leads to extra time known as non-productive time. In this work, a comprehensive study was carried out to realize the nature of the instability problems of the wellbore in Rumaila oilfield to improve the well design. The study goal is to develop a geomechanical model in one dimension by utilizing Schlumberger Techlog (Version 2015) software. Open hole wireline measurements were needed to develop the model. The model calibrating and validating with core laboratory tests (triaxial test), well test (Mini-frac test), repeated formation test. Mohr-Coulomb, Mogi-Coulomb, and Modified Lade are the three failure criteria which utilized to analyze the borehole breakouts and to determine the minimum mud weight needed for a stable wellbore wall. For more accuracy of the geomechanical model, the predicted profile of the borehole instability is compared with the actual failure of the borehole that is recorded by caliper log. The results of the analysis showed that the Mogi-Coulomb criteria are closer to the true well failure compared with the other two criteria and considered as the better criteria in predicting the rock failure in the Rumaila oilfield. The wellbore instability analysis revealed that the vertical and low deviated wells (less than 40º) is safer and more stable. While, the horizontal and directional wells should be drilled longitudinally to the direction of the minimum horizontal stresses at a range between 140º–150º North West-South East and the mud weight recommended is increased to 10.5 ppg to avoid most of instabilities problems. The results contribute in development plan of the wells nearby the studied area and decreasing NPT and cost.


Sign in / Sign up

Export Citation Format

Share Document