The influence of the switch platform, the abutment, the biotype and the subcrestal placement of the implants in the dimensions of the circumferential periimplantar bone crest. A follow-up 2D and 3D radiographic evaluation for 1 year.

2018 ◽  
Author(s):  
Fernando Oliveira
Keyword(s):  
Radiographic Evaluation ◽  
2D And 3D

scholarly journals Treatment Outcomes of Lesser Tuberosity Osteotomy Nonunion After Total Shoulder Arthroplasty

2018 ◽  
Vol 2 ◽  
pp. 247154921880777
Author(s):  
Zachary J Bloom ◽  
Cesar D Lopez, BA ◽  
Stephen P Maier ◽  
Brian B Shiu ◽  
Djuro Petkovic ◽  
...  
Keyword(s):  
Treatment Outcomes ◽  
Shoulder Arthroplasty ◽  
Surgical Repair ◽  
Total Shoulder Arthroplasty ◽  
Case Series ◽  
Radiographic Evaluation ◽  
Lesser Tuberosity ◽  
Conservative Care ◽  
Conservative Group

Introduction Lesser tuberosity osteotomy (LTO) during anatomic total shoulder arthroplasty has a 13% nonunion rate. Treatment for LTO nonunion is controversial and poorly described in the literature. The purpose of this study was to compare the surgical and nonsurgical treatment outcomes of LTO nonunion. Methods A retrospective case series of 9 consecutive patients with LTO nonunion after primary anatomic shoulder arthroplasty at 1 institution from 2010 to 2016 were studied. Outcomes measured were radiographic evaluation of LTO on axillary X-ray, clinical range of motion (ROM), subscapularis strength, and pain at the time of LTO nonunion diagnosis and after either conservative care or surgical repair of the LTO nonunion. Results LTO nonunion was treated surgically in 4 and conservatively in 5 patients with average follow-up of 30 and 22 months, respectively. There were no significant differences in age, sex, or smoking status between groups. Treatment decision was a shared model of surgeon and patient. Displaced LTO nonunion was treated surgically in 2 and conservatively in 3 patients. There were no differences in LTO union rate of 50% in the surgical versus 60% in the conservative group. Abdominal compression test was abnormal in 50% of surgical versus 40% of conservative groups. At follow-up, ROM was lower in the surgical group with 128° forward elevation (FE) and 33° external rotation (ER) compared to 148° FE and 62° ER. Only 1 patient with LTO nonunion required conversion to reverse replacement. Conclusion LTO nonunion after shoulder arthroplasty is rare. Surgical repair of LTO nonunion does not significantly improve clinical or radiographic outcomes compared to conservative care.

scholarly journals Modular tapered conical revision stem in hip revision surgery: mid- term results

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Loris Perticarini ◽  
Stefano Marco Paolo Rossi ◽  
Alberto Fioruzzi ◽  
Eugenio Jannelli ◽  
Mario Mosconi ◽  
...  
Keyword(s):  
Preoperative Assessment ◽  
Bone Defects ◽  
Implant Design ◽  
Harris Hip Score ◽  
Radiographic Evaluation ◽  
Stem Design ◽  
Additional Surgery ◽  
Prime Concern ◽  
Distal Fixation

Abstract Background The aim of this paper is to evaluate the clinical and radiological outcomes of a fluted tapered modular distal-fixation stem at medium to long-term follow-up. The hypothesis of this investigation was to verify if the use of this implant design may have provided potential advantages in femoral revisions and post-traumatic instances where the restoration of the anatomy was the prime concern. Methods We retrospectively reviewed 62 cases of femoral revision surgeries, performed in Paprosky type IIIA and IIIB bone defects between January 2001 and December 2011 with a mean follow-up of 8.5 ± 1.5 years (range 5.1–15.9 years) where a modular fluted stem was used. The clinical assessment was performed with the Harris Hip Score (HHS), and the radiographic evaluation was carried in order to assess the stability of the femoral component. Intra-operative and postoperative complications were recorded, and the rates of complications and revisions for any cause were determined. Results Mean HHS improved 35.4 points from the preoperative assessment. Radiographic evaluation showed a stable stem anchorage in 90.3% of the cases at the last follow-up. Five (8%) implants required additional surgery. Neither breakage of the stem nor loosening of the taper junction were recorded. Kaplan-Meier survivorship was 89.4% (CI: 88.8–90%) for any complication and 92.3% (CI: 91.8–92.7%) according to revision for any causes at 81 months follow-up. Conclusions Our findings suggest that this stem design is a reliable option in cases of complex femoral bone defects, as well as in cases with high functional deficiencies, with promising survivorship.

scholarly journals Value of Three-Dimensional Digital Subtraction Angiography for Detection and Classification of Intracranial Aneurysm Remnants After Clipping

2021 ◽  
Author(s):  
Serge Marbacher ◽  
Matthias Halter ◽  
Deborah R Vogt ◽  
Jenny C Kienzler ◽  
Christian T J Magyar ◽  
...  
Keyword(s):  
Intracranial Aneurysm ◽  
Digital Subtraction Angiography ◽  
Diagnostic Yield ◽  
Three Dimensional ◽  
P Value ◽  
Digital Subtraction ◽  
Patient Demographics ◽  
Included Patient ◽  
2D And 3D

Abstract BACKGROUND The current gold standard for evaluation of the surgical result after intracranial aneurysm (IA) clipping is two-dimensional (2D) digital subtraction angiography (DSA). While there is growing evidence that postoperative 3D-DSA is superior to 2D-DSA, there is a lack of data on intraoperative comparison. OBJECTIVE To compare the diagnostic yield of detection of IA remnants in intra- and postoperative 3D-DSA, categorize the remnants based on 3D-DSA findings, and examine associations between missed 2D-DSA remnants and IA characteristics. METHODS We evaluated 232 clipped IAs that were examined with intraoperative or postoperative 3D-DSA. Variables analyzed included patient demographics, IA and remnant distinguishing characteristics, and 2D- and 3D-DSA findings. Maximal IA remnant size detected by 3D-DSA was measured using a 3-point scale of 2-mm increments. RESULTS Although 3D-DSA detected all clipped IA remnants, 2D-DSA missed 30.4% (7 of 23) and 38.9% (14 of 36) clipped IA remnants in intraoperative and postoperative imaging, respectively (95% CI: 30 [ 12, 49] %; P-value .023 and 39 [23, 55] %; P-value = <.001), and more often missed grade 1 (< 2 mm) clipped remnants (odds ratio [95% CI]: 4.3 [1.6, 12.7], P-value .005). CONCLUSION Compared with 2D-DSA, 3D-DSA achieves a better diagnostic yield in the evaluation of clipped IA. Our proposed method to grade 3D-DSA remnants proved to be simple and practical. Especially small IA remnants have a high risk to be missed in 2D-DSA. We advocate routine use of either intraoperative or postoperative 3D-DSA as a baseline for lifelong follow-up of clipped IA.

scholarly journals Total Hip Prostheses in Standing, Sitting and Squatting Positions: An Overview of Our 8 Years Practice Using the EOS Imaging Technology

2015 ◽  
Vol 9 (1) ◽  
pp. 26-44 ◽  
Author(s):  
Jean-Yves Lazennec ◽  
Marc-Antoine Rousseau ◽  
Adrien Brusson ◽  
Dominique Folinais ◽  
Maria Amel ◽  
...  
Keyword(s):  
Innovative Technology ◽  
Hip Prostheses ◽  
Total Hip ◽  
Eos Imaging ◽  
Abnormal Posture ◽  
Total Hip Prostheses ◽  
The Subject ◽  
2D And 3D ◽  
Active Patients

More total hip arthroplasty (THA) is performed worldwide and especially in younger and more active patients compared to earlier decades. One of the focuses of THA research in the future will be on optimizing the radiological follow-up of these patients using 2D and 3D measurements of implants position while reducing the radiation dose delivered. Low-dose EOS® imaging is an innovative slot-scanning radiograph system providing valuable information in patient functional positions (standing, sitting and even squatting positions). EOS has been proven accurate and reliable without significant inconvenience caused by the metallic artifacts of implants. The ability to obtain precise data on implant orientation according to the patient posture opens new perspectives for a comprehensive analysis of the pelvic frontal and sagittal balance and its potential impact on implants function and failures. We report our 8 years experience on our first 300 THA patients using this technology routinely for pre and post op evaluation. Our results will be compared and confronted with the actual literature about this innovative technology. We shall especially emphasize our experience about patients with abnormal posture and the evolution of the subject over time, because the phenomenon of an aging spine is frequently associated with the process of aging hips.

Clinical and Radiographic Evaluation of Early Loaded Maxillary Anterior Implants: Three-Year Follow-up

2019 ◽  
Vol 39 (1) ◽  
pp. 123-129
Author(s):  
Erkut Kahramanoglu ◽  
Yılmaz Aslan ◽  
Yasar Özkan ◽  
Yasemin Özkan
Keyword(s):  
Radiographic Evaluation

scholarly journals Radiographic evaluation of the use of transverse traction device in vertebral arthrodesis for degenerative diseases

2014 ◽  
Vol 13 (1) ◽  
pp. 27-30
Author(s):  
Edgar Takao Utino ◽  
João Paulo Machado Bergamaschi ◽  
Luciano Antonio Nassar Pellegrino ◽  
Ricardo Shigueaki Galhego Umeta ◽  
Maria Fernanda Silber Caffaro ◽  
...  
Keyword(s):  
Evaluation Studies ◽  
Fusion Rate ◽  
Radiographic Evaluation ◽  
Pedicle Fixation ◽  
Degenerative Lumbar Diseases ◽  
Significant Difference ◽  
Traction Device ◽  
Consolidation Rate ◽  
The Stability

OBJECTIVE: Perform radiographic analysis of the use of Transverse Traction Device (DTT) with respect to fusion rate in patients submitted to vertebral arthrodesis for degenerative lumbar diseases. METHODS: We selected x-ray images on anteroposterior, lateral and oblique views and with maximum flexion and extension dynamics of 23 patients submitted to posterolateral arthrodesis of the lumbar spine with a minimum follow-up period of six months. The images were evaluated and classified by the Linovitz's system by two spine surgeons. RESULTS: We evaluated the radiographs of 23 patients after the minimum postoperative period of 6 months and of these, 11 have used DTT. With regard to the consolidation rate, seven patients (63.6%) in the group of DTT were classified as fusion as well as six patients (50%) who were not submitted to the treatment. There was no statistical difference between the groups regarding the consolidation rate. CONCLUSION: The use of transverse traction device in this study showed no significant difference in the rate of consolidation in radiographic evaluation. Studies on the effective participation of this device in the stability of pedicle fixation systems are still lacking in the literature.

scholarly journals Primary total hip arthroplasty using an uncemented Wagner SL stem in elderly patients with Dorr type C femoral bone

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Ping Zhen ◽  
Jun Liu ◽  
Xusheng Li ◽  
Hao Lu ◽  
Shenghu Zhou
Keyword(s):  
Lateral View ◽  
Harris Hip Score ◽  
Radiographic Evaluation ◽  
Femoral Bone ◽  
Stem Design ◽  
Total Hip ◽  
Tapered Stem ◽  
Type C ◽  
Hip Arthroplasties

Abstract Background The purpose of this study was to review retrospectively the primary total hip arthroplasties operated upon with the cementless Wagner Self-Locking stem in patients with type C femoral bone. Methods Twenty-eight total hip arthroplasties were performed in 25 patients aged ≥ 60 years using a cementless Wagner Self-Locking femoral component between 2006 and 2011. According to Dorr’s criteria, all 28 femora were classified as type C bone. All patients were treated with THA using a cementless Wagner cone prosthesis. Clinical and radiologic evaluations were performed on all patients. Results Mean follow-up period was 125 ± 10.5 months (range 96 to 156 months). Average Harris hip score pre-operatively was 46 ± 9 (range 39 to 62) and at the last follow-up was 90 ± 9 (range 83 to 98). The stem to canal fill is calculated as percentages on the operative side at three distinct levels: just below the lesser trochanter, at midstem, and 1 cm above the tip of the component on anteroposterior radiograph. The mean proximal stem-to-canal fill percentages were 97% ± 2.1%, 95% ± 3.5%, and 88% ± 2.6%, respectively (anteroposterior view) and 92% ± 2.2%, 86% ± 1.9%, and 83% ± 2.5%, respectively (lateral view). Radiographic evaluation demonstrated good osteointegration of the implants in the follow-up. Conclusions Based on the long-straight cylindrical tapered stem design, the cementless Wagner SL stem can achieve reliable stability by close apposition of the stem and wide stovepipe femoral canal from metaphysis to diaphysis in type C bone.

Sign in / Sign up

Export Citation Format

Share Document