scholarly journals Fundamental and higher-mode Rayleigh wave characteristics of ambient seismic noise in New Zealand

2021 ◽  
Author(s):  
L Brooks ◽  
John Townend ◽  
P Gerstoft ◽  
S Bannister ◽  
Lionel Carter

In order to use ambient seismic noise for mapping Earth's structure, it is important to understand the spatiotemporal characteristics of the noise field. This study uses data collected during four austral winter months of 2002 to investigate New Zealand's ambient seismic noise field in the double-ocean-wave-frequency range (0.1-0.3 Hz). It is shown via beamforming analysis that there are two distinct dispersive waves in the data. These waves can be separated. Their estimated phase velocities (2.5-2 and 4-3 km/s in the frequency range 0.14-0.25 Hz) match well with fundamental and higher-mode Rayleigh dispersion curves. Studies of double-wave-frequency microseisms elsewhere generally show the Rayleigh noise fields to be dominated by fundamental mode waves. The reason why higher-mode signals are observed here may reflect a combination of long ocean wave periods, large waveheights, the direct deep water approach to narrow continental margins, and the proximity of the seismograph array to the source regions. Copyright 2009 by the American Geophysical Union.

2021 ◽  
Author(s):  
L Brooks ◽  
John Townend ◽  
P Gerstoft ◽  
S Bannister ◽  
Lionel Carter

In order to use ambient seismic noise for mapping Earth's structure, it is important to understand the spatiotemporal characteristics of the noise field. This study uses data collected during four austral winter months of 2002 to investigate New Zealand's ambient seismic noise field in the double-ocean-wave-frequency range (0.1-0.3 Hz). It is shown via beamforming analysis that there are two distinct dispersive waves in the data. These waves can be separated. Their estimated phase velocities (2.5-2 and 4-3 km/s in the frequency range 0.14-0.25 Hz) match well with fundamental and higher-mode Rayleigh dispersion curves. Studies of double-wave-frequency microseisms elsewhere generally show the Rayleigh noise fields to be dominated by fundamental mode waves. The reason why higher-mode signals are observed here may reflect a combination of long ocean wave periods, large waveheights, the direct deep water approach to narrow continental margins, and the proximity of the seismograph array to the source regions. Copyright 2009 by the American Geophysical Union.


2021 ◽  
Author(s):  
Y Behr ◽  
John Townend ◽  
M Bowen ◽  
Lionel Carter ◽  
R Gorman ◽  
...  

The increased use of ambient seismic noise for seismic imaging requires better understanding of the ambient seismic noise wavefield and its source locations and mechanisms. Although the source regions and mechanisms of Rayleigh waves have been studied extensively, characterization of Love wave source processes are sparse or absent. We present here the first systematic comparison of ambient seismic noise source directions within the primary (~10-20 s period) and secondary (~5-10 s period) microseism bands for both Rayleigh and Love waves in the Southern Hemisphere using vertical- and horizontal-component ambient seismic noise recordings from a dense temporary network of 68 broadband seismometers in New Zealand. Our analysis indicates that Rayleigh and Love waves within the primary microseism band appear to be mostly generated in different areas, whereas in the secondary microseism band they arrive from similar backazimuths. Furthermore, the source areas of surface waves within the secondary microseism band correlate well with modeled deep-water and near-coastal source regions. Key Points Rayleigh and Love wave source regions of the secondary microseism are co-located Rayleigh and Love wave source regions of the primary microseism differ strongly Observed and modeled source directions for the secondary microseism agree well ©2012. American Geophysical Union. All Rights Reserved.


2021 ◽  
Author(s):  
Y Behr ◽  
John Townend ◽  
M Bowen ◽  
Lionel Carter ◽  
R Gorman ◽  
...  

The increased use of ambient seismic noise for seismic imaging requires better understanding of the ambient seismic noise wavefield and its source locations and mechanisms. Although the source regions and mechanisms of Rayleigh waves have been studied extensively, characterization of Love wave source processes are sparse or absent. We present here the first systematic comparison of ambient seismic noise source directions within the primary (~10-20 s period) and secondary (~5-10 s period) microseism bands for both Rayleigh and Love waves in the Southern Hemisphere using vertical- and horizontal-component ambient seismic noise recordings from a dense temporary network of 68 broadband seismometers in New Zealand. Our analysis indicates that Rayleigh and Love waves within the primary microseism band appear to be mostly generated in different areas, whereas in the secondary microseism band they arrive from similar backazimuths. Furthermore, the source areas of surface waves within the secondary microseism band correlate well with modeled deep-water and near-coastal source regions. Key Points Rayleigh and Love wave source regions of the secondary microseism are co-located Rayleigh and Love wave source regions of the primary microseism differ strongly Observed and modeled source directions for the secondary microseism agree well ©2012. American Geophysical Union. All Rights Reserved.


2021 ◽  
Author(s):  
◽  
Yannik Behr

<p>We use ambient seismic noise to image the crust and uppermost mantle, and to determine the spatiotemporal characteristics of the noise field itself, and examine the way in which those characteristics may influence imaging results. Surface wave information extracted from ambient seismic noise using cross-correlation methods significantly enhances our knowledge of the crustal and uppermost mantle shear-velocity structure of New Zealand. We assemble a large dataset of three-component broadband continuous seismic data from temporary and permanent seismic stations, increasing the achievable resolution of surface wave velocity maps in comparison to a previous study. Three-component data enables us to examine both Rayleigh and Love waves using noise cross-correlation functions. Employing a Monte Carlo inversion method, we invert Rayleigh and Love wave phase and group velocity dispersion curves separately for spatially averaged isotropic shear velocity models beneath the Northland Peninsula. The results yield first-order radial anisotropy estimates of 2% in the upper crust and up to 15% in the lower crust, and estimates of Moho depth and uppermost mantle velocity compatible with previous studies. We also construct a high-resolution, pseudo-3D image of the shear-velocity distribution in the crust and uppermost mantle beneath the central North Island using Rayleigh and Love waves. We document, for the first time, the lateral extent of low shear-velocity zones in the upper and mid-crust beneath the highly active Taupo Volcanic Zone, which have been reported previously based on spatially confined 1D shear-velocity profiles. Attributing these low shear-velocities to the presence of partial melt, we use an empirical relation to estimate an average percentage of partial melt of < 4:2% in the upper and middle crust. Analysis of the ambient seismic noise field in the North Island using plane wave beamforming and slant stacking indicates that higher mode Rayleigh waves can be detected, in addition to the fundamental mode. The azimuthal distributions of seismic noise sources inferred from beamforming are compatible with high near-coastal ocean wave heights in the period band of the secondary microseism (~7 s). Averaged over 130 days, the distribution of seismic noise sources is azimuthally homogeneous, indicating that the seismic noise field is well-suited to noise cross-correlation studies. This is underpinned by the good agreement of our results with those from previous studies. The effective homogeneity of the seismic noise field and the large dataset of noise cross-correlation functions we here compiled, provide the cornerstone for future studies of ambient seismic noise and crustal shear velocity structure in New Zealand.</p>


2020 ◽  
Vol 8 ◽  
Author(s):  
Zulfakriza Zulfakriza ◽  
Andri D. Nugraha ◽  
Sri Widiyantoro ◽  
Phil R. Cummins ◽  
David P. Sahara ◽  
...  

2021 ◽  
Author(s):  
◽  
Yannik Behr

<p>We use ambient seismic noise to image the crust and uppermost mantle, and to determine the spatiotemporal characteristics of the noise field itself, and examine the way in which those characteristics may influence imaging results. Surface wave information extracted from ambient seismic noise using cross-correlation methods significantly enhances our knowledge of the crustal and uppermost mantle shear-velocity structure of New Zealand. We assemble a large dataset of three-component broadband continuous seismic data from temporary and permanent seismic stations, increasing the achievable resolution of surface wave velocity maps in comparison to a previous study. Three-component data enables us to examine both Rayleigh and Love waves using noise cross-correlation functions. Employing a Monte Carlo inversion method, we invert Rayleigh and Love wave phase and group velocity dispersion curves separately for spatially averaged isotropic shear velocity models beneath the Northland Peninsula. The results yield first-order radial anisotropy estimates of 2% in the upper crust and up to 15% in the lower crust, and estimates of Moho depth and uppermost mantle velocity compatible with previous studies. We also construct a high-resolution, pseudo-3D image of the shear-velocity distribution in the crust and uppermost mantle beneath the central North Island using Rayleigh and Love waves. We document, for the first time, the lateral extent of low shear-velocity zones in the upper and mid-crust beneath the highly active Taupo Volcanic Zone, which have been reported previously based on spatially confined 1D shear-velocity profiles. Attributing these low shear-velocities to the presence of partial melt, we use an empirical relation to estimate an average percentage of partial melt of < 4:2% in the upper and middle crust. Analysis of the ambient seismic noise field in the North Island using plane wave beamforming and slant stacking indicates that higher mode Rayleigh waves can be detected, in addition to the fundamental mode. The azimuthal distributions of seismic noise sources inferred from beamforming are compatible with high near-coastal ocean wave heights in the period band of the secondary microseism (~7 s). Averaged over 130 days, the distribution of seismic noise sources is azimuthally homogeneous, indicating that the seismic noise field is well-suited to noise cross-correlation studies. This is underpinned by the good agreement of our results with those from previous studies. The effective homogeneity of the seismic noise field and the large dataset of noise cross-correlation functions we here compiled, provide the cornerstone for future studies of ambient seismic noise and crustal shear velocity structure in New Zealand.</p>


First Break ◽  
2019 ◽  
Vol 37 (4) ◽  
pp. 83-90
Author(s):  
Soumen Koley ◽  
Henk Jan Bulten ◽  
Jo van den Brand ◽  
Maria Bader ◽  
Frank Linde ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document