scholarly journals A Rheo-Optic Study of Wormlike Micelles Solutions

2021 ◽  
Author(s):  
◽  
Allan Raudsepp

<p>Shear banding, where a fluid spatially partitions into strain rate or shear bands in steadystate simple shear flow conditions, was first observed in wormlike micelles solutions and has since been observed in many other complex fluids. These solutions have been used extensively to explore the relationship between shear (or stress) banding and microstructure in complex fluids. This relationship is difficult to study because of its dynamic nature and there is still no clear consensus as to how banding relates to microstructural changes in wormlike micelles solutions. In this thesis, the rheology of a number of wormlike micelles solutions is examined using both conventional and novel techniques with the view to developing a better understanding of this relationship. The rheology of three wormlike micelles solutions composed of a surfactant cetylpyridinium chloride (CPCl) and counterion sodium salicylate in water with or without the salt sodium chloride were examined using mechanical rheometry and the rheo-optical techniques: homodyne photo-correlation spectroscopy (PCS), diffusing wave spectroscopy (DWS) and ellipsometry. Rheo-mechanical measurements were largely consistent with the predictions of the reptation-reaction model. While signi cant stress fluctuations were noted in one particular flow geometry, they were generally not observed in most rheomechanical measurements presented here, indicating that these fluctuations are not universal and that they are geometry dependent. Shear induced turbidity was directly observed in the cone-plate and parallel-plate geometries with turbid rings forming in samples that showed a stress plateau. The Poisson-renewal model, which extends the reptationreaction model to include the influence of high frequency modes on the linear rheology, was tested experimentally using mechanical rheometry, DWS microrheology and literature data. In most cases the data fitted the model behaviour quite well, giving a physically reasonable estimate of the average length of the micelles. DWS's spatial sensitivity to shear induced relative motion was then used to probe the flow behaviour of selected wormlike micelles solutions in the cylindrical-Couette, cone-plate and parallel-plate geometries. In the cylindrical-Couette, the  'flow-DWS' measurements were largely consistent with rheo-mechanical measurements and indicated that some wormlike micelles solutions were partitioning into apparently stable high and low strain rate bands in the vicinity of the stress plateau. While measurements in the cone-plate and parallel-plate geometries also suggested shear banding in samples that showed a stress plateau, the interpretation was less clear-cut. Homodyne PCS was combined with ellipsometry to examine the spatial relationship between strain rate and birefringence banding in selected wormlike micelles solutions in a cylindrical-Couette geometry. In contrast to the observations of previous workers, it was found here that the birefringence and strain rate bands did coincide. Furthermore, the high strain rate band was observed to be more turbid than the lower strain rate band suggesting a connection between strain rate, optical anisotropy and turbidity.</p>

2021 ◽  
Author(s):  
◽  
Allan Raudsepp

<p>Shear banding, where a fluid spatially partitions into strain rate or shear bands in steadystate simple shear flow conditions, was first observed in wormlike micelles solutions and has since been observed in many other complex fluids. These solutions have been used extensively to explore the relationship between shear (or stress) banding and microstructure in complex fluids. This relationship is difficult to study because of its dynamic nature and there is still no clear consensus as to how banding relates to microstructural changes in wormlike micelles solutions. In this thesis, the rheology of a number of wormlike micelles solutions is examined using both conventional and novel techniques with the view to developing a better understanding of this relationship. The rheology of three wormlike micelles solutions composed of a surfactant cetylpyridinium chloride (CPCl) and counterion sodium salicylate in water with or without the salt sodium chloride were examined using mechanical rheometry and the rheo-optical techniques: homodyne photo-correlation spectroscopy (PCS), diffusing wave spectroscopy (DWS) and ellipsometry. Rheo-mechanical measurements were largely consistent with the predictions of the reptation-reaction model. While signi cant stress fluctuations were noted in one particular flow geometry, they were generally not observed in most rheomechanical measurements presented here, indicating that these fluctuations are not universal and that they are geometry dependent. Shear induced turbidity was directly observed in the cone-plate and parallel-plate geometries with turbid rings forming in samples that showed a stress plateau. The Poisson-renewal model, which extends the reptationreaction model to include the influence of high frequency modes on the linear rheology, was tested experimentally using mechanical rheometry, DWS microrheology and literature data. In most cases the data fitted the model behaviour quite well, giving a physically reasonable estimate of the average length of the micelles. DWS's spatial sensitivity to shear induced relative motion was then used to probe the flow behaviour of selected wormlike micelles solutions in the cylindrical-Couette, cone-plate and parallel-plate geometries. In the cylindrical-Couette, the  'flow-DWS' measurements were largely consistent with rheo-mechanical measurements and indicated that some wormlike micelles solutions were partitioning into apparently stable high and low strain rate bands in the vicinity of the stress plateau. While measurements in the cone-plate and parallel-plate geometries also suggested shear banding in samples that showed a stress plateau, the interpretation was less clear-cut. Homodyne PCS was combined with ellipsometry to examine the spatial relationship between strain rate and birefringence banding in selected wormlike micelles solutions in a cylindrical-Couette geometry. In contrast to the observations of previous workers, it was found here that the birefringence and strain rate bands did coincide. Furthermore, the high strain rate band was observed to be more turbid than the lower strain rate band suggesting a connection between strain rate, optical anisotropy and turbidity.</p>


Fluids ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 45 ◽  
Author(s):  
J. García-Sandoval ◽  
Fernando Bautista ◽  
Jorge Puig ◽  
Octavio Manero

In this work, we examine the shear-banding flow in polymer-like micellar solutions with the generalized Bautista-Manero-Puig (BMP) model. The couplings between flow, structural parameters, and diffusion naturally arise in this model, derived from the extended irreversible thermodynamics (EIT) formalism. Full tensorial expressions derived from the constitutive equations of the model, in addition to the conservation equations, apply for the case of simple shear flow, in which gradients of the parameter representing the structure of the system and concentration vary in the velocity gradient direction. The model predicts shear-banding, concentration gradients, and jumps in the normal stresses across the interface in shear-banding flows.


2008 ◽  
Vol 47 (3) ◽  
pp. 283-300 ◽  
Author(s):  
Peter D. Olmsted
Keyword(s):  

2007 ◽  
Vol 76 (1) ◽  
Author(s):  
Lydiane Bécu ◽  
Domitille Anache ◽  
Sébastien Manneville ◽  
Annie Colin

2007 ◽  
Vol 22 (10) ◽  
pp. 2655-2658 ◽  
Author(s):  
W.H. Jiang ◽  
F.X. Liu ◽  
F. Jiang ◽  
K.Q. Qiu ◽  
H. Choo ◽  
...  

We investigated the effect of strain rate on the plastic-flow stress of a Zr-based bulk-metallic glass in quasistatic compression. The results indicate that the plastic-flow stress is dependent on the strain rate: an increase in the strain rate leads to a decrease in the plastic-flow stress, and vice versa. However, simply loading, unloading, and reloading at a constant strain rate do not change the plastic-flow stress. This strain-rate dependence of the plastic-flow stress may be related to shear-banding operations.


2009 ◽  
Vol 48 (8) ◽  
pp. 831-844 ◽  
Author(s):  
G. Ovarlez ◽  
S. Rodts ◽  
X. Chateau ◽  
P. Coussot

2008 ◽  
Vol 151 (1-3) ◽  
pp. 119-128 ◽  
Author(s):  
Christos Tsenoglou ◽  
Evangelos Voyiatzis

Sign in / Sign up

Export Citation Format

Share Document