The pulp and paper properties ofSirex noctilioinfested and fire-damagedthermomechanically pulped, South African grownPinus patula

2010 ◽  
Vol 72 (3-4) ◽  
pp. 173-179
Author(s):  
M du Plessis ◽  
N J le Roux ◽  
S Gardner-Lubbe ◽  
J PJ Swart ◽  
T Rypstra
BioResources ◽  
2015 ◽  
Vol 10 (4) ◽  
Author(s):  
Dariusz Danielewicz ◽  
Barbara Surma-Ślusarska ◽  
Grzegorz Żurek ◽  
Danuta Martyniak ◽  
Magdalena Kmiotek ◽  
...  

1966 ◽  
Vol 20 (10) ◽  
pp. 549-555
Author(s):  
Tokuichiro Yamaguchi

2021 ◽  
Vol 55 (7-8) ◽  
pp. 799-807
Author(s):  
PEJMAN REZAYATI-CHARANI ◽  
AHMAD AZIZI MOSSELLO ◽  
MOHAMMAD BERVAIE

The aim of this study was to investigate the effect of using whey powder (different concentrations and treatment repetitions) as a probiotic agent on the quantitative and qualitative properties of stored bagasse intended for use in the pulp and paper industry. For this purpose, whey powder was added in three concentrations and the treatment was applied once or twice. After that, soda pulp was prepared under conventional conditions. Then, handsheets (80 g/m2) were made and tested in terms of paper properties, and the results were compared. The findings revealed that increasing the concentration of whey powder and the number of treatments significantly improved the pulp and paper characteristics, thus, using the treatment with 2% whey powder twice and 0.4% whey powder once led to the best results for bagasse protection in terms of quality of the raw material, pulp and handsheets.


ACS Omega ◽  
2020 ◽  
Vol 5 (23) ◽  
pp. 13703-13711
Author(s):  
Cláudia S. V. G. Esteves ◽  
Elisabet Brännvall ◽  
Sören Östlund ◽  
Olena Sevastyanova

2020 ◽  
Vol 71 (4) ◽  
pp. 365-370
Author(s):  
Emre Birinci ◽  
Ahmet Tutuş ◽  
Mustafa Çiçekler

In this study, Rhododendron luteum and Rhododendron ponticum were evaluated as raw material for pulp and paper production. 12 different sodium borohydride (NaBH4) added cooking trials were performed for each sample and kraft method was used for pulp production. Pulp properties, such as yield, kappa number and viscosity, and physical properties, such as breaking length and burst index, were determined for each trial. Besides, the effects of active alkali and NaBH4 on the pulp and paper properties were also examined. Optimum cooking conditions were obtained by using 18 % active alkali for NaBH4-free cooking experiments and 0.5 % NaBH4 and 18 % active alkali for NaBH4-added cooking experiments. In NaBH4-added pulping condition, the screened yield, kappa number and viscosity of R. luteum were found to be 43.4 %, 40.1 and 949 cm3/g1, respectively. The respective values for R. ponticum were 41.9 %, 44.5 and 885 cm3/g1. The screened yields of R. luteum and R. ponticum increased by about 2.8 % and 5.3 %, respectively, with 5 % addition of NaBH4 compared to NaBH4-free cooking experiments. Furthermore, with the addition of NaBH4, the kappa numbers decreased while the viscosity increased. The physical properties of the produced papers were also improved by using NaBH4 in cooking liquor. According to the obtained results, it was found that R. luteum and R. ponticum species can be evaluated for pulp and paper production.


Holzforschung ◽  
2006 ◽  
Vol 60 (4) ◽  
pp. 355-364 ◽  
Author(s):  
Jonas Konn ◽  
Lari Vähäsalo ◽  
Andrey Pranovich ◽  
Bjarne Holmbom

Abstract De-esterification and sulfonation reactions, which create new anionic groups in the middle lamella and primary wall layers, are the key chemical reactions in chemithermomechanical pulping. The effects of these reactions on the resulting fibre dimensions, refining energy demand, hand-sheet bulk and strength properties were assessed by laboratory-scale chemical pre-treatments and refining of Norway spruce chips. After pre-treatments with alkaline, sulfite, alkaline sulfite and alkaline peroxide liquors, a Wing defibrator-type batch refiner was used. The refining energy was measured. The degree of alkaline hydrolysis of acetyl and methyl ester groups in galactoglucomannans (GGMs) and pectins, and the degree of lignin sulfonation were determined. Hand-sheets were prepared and their physical properties were tested. The data were subjected to multivariate analysis and the order of significance of the chemical reactions towards pulp and paper properties was estimated. Chemical pre-treatments were found to increase the fibre length and the energy demand considerably. The fibre length and width after refining were strongly influenced by lignin sulfonation and pectin demethylation. GGM deacetylation had little influence on preserving the fibre dimensions in CTMP refining. The bulk, on the other hand, was highly influenced by GGM deacetylation. Peroxide reactions in alkaline peroxide treatments had no effect on the pulp and paper properties.


Author(s):  
Jin Mo Kim ◽  
Im Jeong Hwang ◽  
Jun Kyu Han ◽  
Yong Kyu Lee ◽  
Jong Myoung Won

Sign in / Sign up

Export Citation Format

Share Document