scholarly journals Influence of working pressure and lasing energy of Al plasma in laser-induced breakdown spectroscopy

2019 ◽  
Vol 17 (40) ◽  
Author(s):  
Qusay Adnan Abbas
Keyword(s):  
Electron Temperature ◽  
Electron Density ◽  
Laser Power ◽  
Debye Length ◽  
Laser Power Density ◽  
Laser Induced Breakdown Spectroscopy ◽  
Working Pressure ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Aluminum Plasma

Aluminum plasma was generated by the irradiation of the targetwith Nd: YAG laser operated at a wavelength of 1064 nm. Theeffect of laser power density and the working pressure on spectrallines generating by laser ablation, were detected by using opticalspectroscopy. The electron density was measured using the Starkbroadening of aluminum lines and the electron temperature byBoltzmann plot method it is one of the methods that are used. Theelectron temperature Te, electron density ne, plasma frequencyand Debye length increased with increasing the laser peakpower. The electron temperature decrease with increasing gaspressure.

Measurement of Plasma Parameters of Fe-Lines in Lipstick Using Laser-Induced Breakdown Spectroscopy

2021 ◽  
Vol 19 (10) ◽  
pp. 01-07
Author(s):  
M.H. Asmaa ◽  
Sami A. Habana
Keyword(s):  
Electron Temperature ◽  
Debye Length ◽  
Nuclear Data ◽  
Laser Induced Breakdown Spectroscopy ◽  
Current Investigation ◽  
Plasma Parameters ◽  
Data Set ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Business Sectors

Electron thickness and temperature of laser prompted Iron plasma boundaries, among different boundaries, were estimated. Plasma was delivered through the connection of high pinnacle power Nd: YAG laser at the key frequency of 1064 nm with a pellet target contains a limited quantity of lipstick from nearby business sectors. Lines from Fe II at 238.502 nm, Fe II at 254.904 nm, Fe II at 262.370 nm, Fe II at 286.545 nm and Fe I at 349.779 nm were utilized to assess the plasma boundaries. The current investigation was completed to assess electron temperature (Te), electron thickness (ne), plasma recurrence, Debye length and Debye number (ND). Laser-incited breakdown spectroscopy LIBS method was used for examining and deciding ghastly discharge lines. ID of change lines from all spectra was completed by contrasting ghostly lines and NIST nuclear data set.

Influence of sample temperature on the laser-induced breakdown spectroscopy of a molybdenum–tungsten alloy

2019 ◽  
Vol 34 (12) ◽  
pp. 2378-2384 ◽  
Author(s):  
Ran Hai ◽  
Zhonglin He ◽  
Ding Wu ◽  
Weina Tong ◽  
Harse Sattar ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Electron Density ◽  
Emission Intensity ◽  
Plasma Temperature ◽  
Sample Temperature ◽  
Tungsten Alloy ◽  
Laser Induced Breakdown Spectroscopy ◽  
Spectral Emission ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown

During laser ablation, the spectral emission intensity, plasma temperature and electron density increased significantly with increasing sample temperature.

scholarly journals Magnetic field effect on laser-induced breakdown spectroscopy and surface modifications of germanium at various fluences

2017 ◽  
Vol 35 (1) ◽  
pp. 159-169 ◽  
Author(s):  
H. Iftikhar ◽  
S. Bashir ◽  
A. Dawood ◽  
M. Akram ◽  
A. Hayat ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electron Temperature ◽  
Surface Modifications ◽  
Laser Induced Breakdown Spectroscopy ◽  
Excitation Temperature ◽  
Number Density ◽  
Plasma Parameters ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
The Magnetic Field

AbstractThe effect of the transverse magnetic field on laser-induced breakdown spectroscopy and surface modifications of germanium (Ge) has been investigated at various fluences. Ge targets were exposed to Nd: YAG laser pulses (1064 nm, 10 ns, 1 Hz) at different fluences ranging from 3 to 25.6 J/cm2 to generate Ge plasma under argon environment at a pressure of 50 Torr. The magnetic field of strength 0.45 Tesla perpendicular to the direction of plasma expansion was employed by using two permanent magnets. The emission spectra of laser-induced Ge plasma was detected by the laser-induced breakdown spectroscopy system. The electron temperature and number density of Ge plasma are evaluated by using the Boltzmann plot and stark broadening methods, respectively. The variations in emission intensity, electron temperature (Te), and number density (ne) of Germanium plasma are explored at various fluences, with and without employment of the magnetic field. It is observed that the magnetic field is responsible for significant enhancement of both excitation temperature and number density at all fluences. It is revealed that an excitation temperature increases from Te,max,without B = 16,190 to Te,max,with B = 20,123 K. Similarly, the two times enhancement in the electron density is observed from ne,max,without B = 2 × 1018 to ne,max,with B = 4 × 1018 cm−3. The overall enhancement in Ge plasma parameters in the presence of the magnetic field is attributed to the Joule heating effect and adiabatic compression. With increasing fluence both plasma parameters increase and achieve their maxima at a fluence of 12.8 J/cm2 and then decrease. In order to correlate the plasma parameters with surface modification, scanning electron microscope analysis of irradiated Ge was performed. Droplets and cones are formed for both cases. However, the growth of ridges and distinctness of features is more pronounced in case of the absence of the magnetic field; whereas surface structures become more diffusive in the presence of the magnetic field.

scholarly journals Plasma Temperature and Electron Density Determination Using Laser-Induced Breakdown Spectroscopy (LIBS) in Earth’s and Mars’s Atmospheres

Atoms ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 50
Author(s):  
Julian Stetzler ◽  
Shijun Tang ◽  
Rosemarie C. Chinni
Keyword(s):  
Electron Density ◽  
Plasma Temperature ◽  
The Other ◽  
Laser Induced Breakdown Spectroscopy ◽  
Stark Broadening ◽  
Hydrogen Line ◽  
Electron Densities ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Carbon Peak

The purpose of this study was to calculate and compare the plasma temperatures and electron densities from the laser-induced breakdown spectroscopy (LIBS) data collected by NASA’s Martian rover and compare them to samples measured in Earth’s atmosphere. Using the Boltzmann plots, LIBS plasma temperatures were obtained for each site. The analysis focused on titanium lines that were located in the spectral region between 300 and 310 nm. The electron density was measured using the Stark broadening of the hydrogen line at 656.6 nm; the full width at half maximum (FWHM) of this line can be measured and correlated to the electron density of the plasma. Due to a neighboring carbon peak with the hydrogen line seen in many of the spectra from the Martian sites, the FWHM needed to be calculated using a computer program that completed the other side of the hydrogen line and then it calculated the FWHM for those data samples affected by this. The plasma temperatures and electron densities of the Martian sites were compared to LIBS samples taken on Earth.

Sign in / Sign up

Export Citation Format

Share Document