Measurement of Plasma Parameters of Fe-Lines in Lipstick Using Laser-Induced Breakdown Spectroscopy

2021 ◽  
Vol 19 (10) ◽  
pp. 01-07
Author(s):  
M.H. Asmaa ◽  
Sami A. Habana
Keyword(s):  
Electron Temperature ◽  
Debye Length ◽  
Nuclear Data ◽  
Laser Induced Breakdown Spectroscopy ◽  
Current Investigation ◽  
Plasma Parameters ◽  
Data Set ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Business Sectors

Electron thickness and temperature of laser prompted Iron plasma boundaries, among different boundaries, were estimated. Plasma was delivered through the connection of high pinnacle power Nd: YAG laser at the key frequency of 1064 nm with a pellet target contains a limited quantity of lipstick from nearby business sectors. Lines from Fe II at 238.502 nm, Fe II at 254.904 nm, Fe II at 262.370 nm, Fe II at 286.545 nm and Fe I at 349.779 nm were utilized to assess the plasma boundaries. The current investigation was completed to assess electron temperature (Te), electron thickness (ne), plasma recurrence, Debye length and Debye number (ND). Laser-incited breakdown spectroscopy LIBS method was used for examining and deciding ghastly discharge lines. ID of change lines from all spectra was completed by contrasting ghostly lines and NIST nuclear data set.

scholarly journals Magnetic field effect on laser-induced breakdown spectroscopy and surface modifications of germanium at various fluences

2017 ◽  
Vol 35 (1) ◽  
pp. 159-169 ◽  
Author(s):  
H. Iftikhar ◽  
S. Bashir ◽  
A. Dawood ◽  
M. Akram ◽  
A. Hayat ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electron Temperature ◽  
Surface Modifications ◽  
Laser Induced Breakdown Spectroscopy ◽  
Excitation Temperature ◽  
Number Density ◽  
Plasma Parameters ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
The Magnetic Field

AbstractThe effect of the transverse magnetic field on laser-induced breakdown spectroscopy and surface modifications of germanium (Ge) has been investigated at various fluences. Ge targets were exposed to Nd: YAG laser pulses (1064 nm, 10 ns, 1 Hz) at different fluences ranging from 3 to 25.6 J/cm2 to generate Ge plasma under argon environment at a pressure of 50 Torr. The magnetic field of strength 0.45 Tesla perpendicular to the direction of plasma expansion was employed by using two permanent magnets. The emission spectra of laser-induced Ge plasma was detected by the laser-induced breakdown spectroscopy system. The electron temperature and number density of Ge plasma are evaluated by using the Boltzmann plot and stark broadening methods, respectively. The variations in emission intensity, electron temperature (Te), and number density (ne) of Germanium plasma are explored at various fluences, with and without employment of the magnetic field. It is observed that the magnetic field is responsible for significant enhancement of both excitation temperature and number density at all fluences. It is revealed that an excitation temperature increases from Te,max,without B = 16,190 to Te,max,with B = 20,123 K. Similarly, the two times enhancement in the electron density is observed from ne,max,without B = 2 × 1018 to ne,max,with B = 4 × 1018 cm−3. The overall enhancement in Ge plasma parameters in the presence of the magnetic field is attributed to the Joule heating effect and adiabatic compression. With increasing fluence both plasma parameters increase and achieve their maxima at a fluence of 12.8 J/cm2 and then decrease. In order to correlate the plasma parameters with surface modification, scanning electron microscope analysis of irradiated Ge was performed. Droplets and cones are formed for both cases. However, the growth of ridges and distinctness of features is more pronounced in case of the absence of the magnetic field; whereas surface structures become more diffusive in the presence of the magnetic field.

scholarly journals Influence of working pressure and lasing energy of Al plasma in laser-induced breakdown spectroscopy

2019 ◽  
Vol 17 (40) ◽  
Author(s):  
Qusay Adnan Abbas
Keyword(s):  
Electron Temperature ◽  
Electron Density ◽  
Laser Power ◽  
Debye Length ◽  
Laser Power Density ◽  
Laser Induced Breakdown Spectroscopy ◽  
Working Pressure ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Aluminum Plasma

Aluminum plasma was generated by the irradiation of the targetwith Nd: YAG laser operated at a wavelength of 1064 nm. Theeffect of laser power density and the working pressure on spectrallines generating by laser ablation, were detected by using opticalspectroscopy. The electron density was measured using the Starkbroadening of aluminum lines and the electron temperature byBoltzmann plot method it is one of the methods that are used. Theelectron temperature Te, electron density ne, plasma frequencyand Debye length increased with increasing the laser peakpower. The electron temperature decrease with increasing gaspressure.

scholarly journals Influence of Lead on the Interpretation of Bone Samples with Laser-Induced Breakdown Spectroscopy

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Abdolhamed Shahedi ◽  
Esmaeil Eslami ◽  
Mohammad Reza Nourani
Keyword(s):  
Plasma Temperature ◽  
Laser Induced Breakdown Spectroscopy ◽  
Plasma Parameters ◽  
Time Duration ◽  
Laboratory Rats ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Group A ◽  
Atomic Lines ◽  
Group B

This study is devoted to tracing and identifying the elements available in bone sample using Laser-Induced Breakdown Spectroscopy (LIBS). The bone samples were prepared from the thigh of laboratory rats, which consumed 325.29 g/mol lead acetate having 4 mM concentration in specified time duration. About 76 atomic lines have been analyzed and we found that the dominant elements are Ca I, Ca II, Mg I, Mg II, Fe I, and Fe II. Temperature curve and bar graph were drawn to compare bone elements of group B which consumed lead with normal group, group A, in the same laboratory conditions. Plasma parameters including plasma temperature and electron density were determined by considering Local Thermodynamic Equilibrium (LTE) condition in the plasma. An inverse relationship has been detected between lead absorption and elements like Calcium and Magnesium absorption comparing elemental values for both the groups.

scholarly journals Laser Induced Breakdown Spectroscopy (LIBS): Application to Geological Materials-=SUP=-*-=/SUP=-

2021 ◽  
Vol 129 (10) ◽  
pp. 1336
Author(s):  
Sonali Dubey ◽  
Rohit Kumar ◽  
Abhishek K. Rai ◽  
Awadhesh K. Rai
Keyword(s):  
Planetary Exploration ◽  
Field Analysis ◽  
Laser Induced Breakdown Spectroscopy ◽  
Data Set ◽  
Geological Materials ◽  
Breakdown Spectroscopy ◽  
Spot Detection ◽  
Huge Data ◽  
Laser Induced Breakdown

Laser-induced breakdown spectroscopy (LIBS) is emerging as an analytical tool for investigating geological materials. The unique abilities of this technique proven its potential in the area of geology. Detection of light elements, portability for in-field analysis, spot detection, and no sample preparation are some features that make this technique appropriate for the study of geological materials. The application of the LIBS technique has been tremendously developed in recent years. In this report, results obtained from previous and most recent studies regarding the investigation of geological materials LIBS technique are reviewed. Firstly, we introduce investigations that report the advancement in LIBS instrumentation, its applications, especially in the area of gemology and the extraterrestrial/planetary exploration have been reviewed. Investigation of gemstones by LIBS technique is not widely reviewed in the past as compared to LIBS application in planetary exploration or other geological applications. It is anticipated that for the classification of gemstones samples, huge data set is appropriate and to analyze this data set, multivariate/chemometric methods will be useful. Recent advancement of LIBS instrumentation for the study of meteorites, depth penetration in Martian rocks and its regolith proved the feasibility of LIBS used as robotic vehicles in the Martian environment. Keywords: LIBS, Gemstone, geological samples, Extra-terrestrial

scholarly journals Extracting Time-Resolved Information from Time-Integrated Laser-Induced Breakdown Spectra

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Emanuela Grifoni ◽  
Stefano Legnaioli ◽  
Marco Lezzerini ◽  
Giulia Lorenzetti ◽  
Stefano Pagnotta ◽  
...  
Keyword(s):  
Laser Pulse ◽  
Strong Dependence ◽  
Laser Induced Breakdown Spectroscopy ◽  
Spectral Information ◽  
Acquisition Time ◽  
Number Density ◽  
Plasma Parameters ◽  
Time Resolved ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown

Laser-induced breakdown spectroscopy (LIBS) data are characterized by a strong dependence on the acquisition time after the onset of the laser plasma. However, time-resolved broadband spectrometers are expensive and often not suitable for being used in portable LIBS instruments. In this paper we will show how the analysis of a series of LIBS spectra, taken at different delays after the laser pulse, allows the recovery of time-resolved spectral information. The comparison of such spectra is presented for the analysis of an aluminium alloy. The plasma parameters (electron temperature and number density) are evaluated, starting from the time-integrated and time-resolved spectra, respectively. The results are compared and discussed.

Sign in / Sign up

Export Citation Format

Share Document