ENERGY RESOLUTION AND EFFICIENCY OF THE SCINTILLATION DETECTOR VERSUS PULSE EVOLUTION TIME

Electron energy loss experiments combined with microscopy have proven to be a valuable tool for the exploration of the structure of electronic excitations in materials. These types of excitations, however, are difficult to measure because of their small intensity. In a usual situation, the filament of the microscope is run at a very high temperature in order to present as much intensity as possible at the specimen. This results in a degradation of the ultimate energy resolution of the instrument due to thermal broadening of the electron beam.We report here observations and measurements on a new LaB filament in a microscope-velocity spectrometer system. We have found that, in general, we may retain a good energy resolution with intensities comparable to or greater than those available with the very high temperature tungsten filament. We have also explored the energy distribution of this filament.

Download Full-text

An improved magnetic prism design for a transmission electron microscope energy filter

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107344 ◽

1978 ◽

Vol 36 (1) ◽

pp. 40-41 ◽

Cited By ~ 1

Author(s):

John W. Andrew ◽

F.P. Ottensmeyer ◽

E. Martell

Keyword(s):

Energy Resolution ◽

Symmetry Plane ◽

Fringe Field ◽

Focal Distance ◽

Electron Trajectories ◽

Focusing Effect ◽

Transmission Electron ◽

Path Lengths ◽

Electron Microscopes ◽

Focusing Properties

Energy selecting electron microscopes of the Castaing-Henry prism-mirror-prism design suffer from a loss of image and energy resolution with increasing field of view. These effects can be qualitatively understood by examining the focusing properties of the prism shown in Fig. 1. A cone of electrons emerges from the entrance lens crossover A and impinges on the planar face of the prism. The task of the prism is to focus these electrons to a point B at a focal distance f2 from the side of the prism. Electrons traveling in the plane of the diagram (i.e., the symmetry plane of the prism) are focused toward point B due to the different path lengths of different electron trajectories in the triangularly shaped magnetic field. This is referred to as horizontal focusing; the better this focusing effect the better the energy resolution of the spectrometer. Electrons in a plane perpendicular to the diagram and containing the central ray of the incident cone are focused toward B by the curved fringe field of the prism.

Download Full-text

ELNES of Iron Compounds

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100133734 ◽

1990 ◽

Vol 48 (2) ◽

pp. 28-29

Author(s):

Hiroki Kurata ◽

Kazuhiro Nagai ◽

Seiji Isoda ◽

Takashi Kobayashi

Keyword(s):

Energy Loss ◽

Metal Ions ◽

Energy Resolution ◽

Transition Metal Oxides ◽

Local Symmetry ◽

Iron Compounds ◽

Fine Structures ◽

Electron Energy Loss ◽

Fe Ions ◽

Electron Energy Loss Spectra

Electron energy loss spectra of transition metal oxides, which show various fine structures in inner shell edges, have been extensively studied. These structures and their positions are related to the oxidation state of metal ions. In this sence an influence of anions coordinated with the metal ions is very interesting. In the present work, we have investigated the energy loss near-edge structures (ELNES) of some iron compounds, i.e. oxides, chlorides, fluorides and potassium cyanides. In these compounds, Fe ions (Fe2+ or Fe3+) are octahedrally surrounded by six ligand anions and this means that the local symmetry around each iron is almost isotropic.EELS spectra were obtained using a JEM-2000FX with a Gatan Model-666 PEELS. The energy resolution was about leV which was mainly due to the energy spread of LaB6 -filament. The threshole energies of each edges were measured using a voltage scan module which was calibrated by setting the Ni L3 peak in NiO to an energy value of 853 eV.

Download Full-text