Use of LaB6 for a High Quality, Small Energy Spread Beam in an Electron Velocity Spectrometer

1976 ◽  
Vol 34 ◽  
pp. 534-535 ◽  
Author(s):  
P. E. Batson ◽  
C. H. Chen ◽  
J. Silcox
Keyword(s):  
High Temperature ◽  
Energy Resolution ◽  
Electron Velocity ◽  
Electronic Excitations ◽  
Small Energy ◽  
Small Intensity ◽  
Good Energy ◽  
Spectrometer System ◽  
Electron Energy Loss ◽  
Very High

Electron energy loss experiments combined with microscopy have proven to be a valuable tool for the exploration of the structure of electronic excitations in materials. These types of excitations, however, are difficult to measure because of their small intensity. In a usual situation, the filament of the microscope is run at a very high temperature in order to present as much intensity as possible at the specimen. This results in a degradation of the ultimate energy resolution of the instrument due to thermal broadening of the electron beam.We report here observations and measurements on a new LaB filament in a microscope-velocity spectrometer system. We have found that, in general, we may retain a good energy resolution with intensities comparable to or greater than those available with the very high temperature tungsten filament. We have also explored the energy distribution of this filament.

TEM study of boron additions to cobalt aluminide

1988 ◽  
Vol 46 ◽  
pp. 546-547
Author(s):  
Gerald B. Feldewerth
Keyword(s):  
High Temperature ◽  
Turbine Engines ◽  
Major Drawback ◽  
University Of Missouri ◽  
Specific Strength ◽  
Aerospace Applications ◽  
Wide Range ◽  
Ordered Alloys ◽  
The University ◽  
Very High

In recent years an increasing emphasis has been placed on the study of high temperature intermetallic compounds for possible aerospace applications. One group of interest is the B2 aiuminides. This group of intermetaliics has a very high melting temperature, good high temperature, and excellent specific strength. These qualities make it a candidate for applications such as turbine engines. The B2 aiuminides exist over a wide range of compositions and also have a large solubility for third element substitutional additions, which may allow alloying additions to overcome their major drawback, their brittle nature.One B2 aluminide currently being studied is cobalt aluminide. Optical microscopy of CoAl alloys produced at the University of Missouri-Rolla showed a dramatic decrease in the grain size which affects the yield strength and flow stress of long range ordered alloys, and a change in the grain shape with the addition of 0.5 % boron.

ELNES of Iron Compounds

1990 ◽  
Vol 48 (2) ◽  
pp. 28-29
Author(s):  
Hiroki Kurata ◽  
Kazuhiro Nagai ◽  
Seiji Isoda ◽  
Takashi Kobayashi
Keyword(s):  
Energy Loss ◽  
Metal Ions ◽  
Energy Resolution ◽  
Transition Metal Oxides ◽  
Local Symmetry ◽  
Iron Compounds ◽  
Fine Structures ◽  
Electron Energy Loss ◽  
Fe Ions ◽  
Electron Energy Loss Spectra

Electron energy loss spectra of transition metal oxides, which show various fine structures in inner shell edges, have been extensively studied. These structures and their positions are related to the oxidation state of metal ions. In this sence an influence of anions coordinated with the metal ions is very interesting. In the present work, we have investigated the energy loss near-edge structures (ELNES) of some iron compounds, i.e. oxides, chlorides, fluorides and potassium cyanides. In these compounds, Fe ions (Fe2+ or Fe3+) are octahedrally surrounded by six ligand anions and this means that the local symmetry around each iron is almost isotropic.EELS spectra were obtained using a JEM-2000FX with a Gatan Model-666 PEELS. The energy resolution was about leV which was mainly due to the energy spread of LaB6 -filament. The threshole energies of each edges were measured using a voltage scan module which was calibrated by setting the Ni L3 peak in NiO to an energy value of 853 eV.

Parallel Detection of Electron Energy Loss Spectra in Direct Mode

1990 ◽  
Vol 48 (2) ◽  
pp. 82-83
Author(s):  
Eckhard Quandt ◽  
Stephan laBarré ◽  
Andreas Hartmann ◽  
Heinz Niedrig
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Energy Resolution ◽  
Large Angle ◽  
Maximum Energy ◽  
Semiconductor Detectors ◽  
Parallel Detection ◽  
Photodiode Arrays ◽  
Electron Energy Loss ◽  
Electron Energy Loss Spectra

Due to the development of semiconductor detectors with high spatial resolution -- e.g. charge coupled devices (CCDs) or photodiode arrays (PDAs) -- the parallel detection of electron energy loss spectra (EELS) has become an important alternative to serial registration. Using parallel detection for recording of energy spectroscopic large angle convergent beam patterns (LACBPs) special selected scattering vectors and small detection apertures lead to very low intensities. Therefore the very sensitive direct irradiation of a cooled linear PDA instead of the common combination of scintillator, fibre optic, and semiconductor has been investigated. In order to obtain a sufficient energy resolution the spectra are optionally magnified by a quadrupole-lens system.The detector used is a Hamamatsu S2304-512Q linear PDA with 512 diodes and removed quartz-glas window. The sensor size is 13 μm ∗ 2.5 mm with an element spacing of 25 μm. Along with the dispersion of 3.5 μm/eV at 40 keV the maximum energy resolution is limited to about 7 eV, so that a magnification system should be attached for experiments requiring a better resolution.

WIELAND-K88

Alloy Digest ◽  
2005 ◽  
Vol 54 (12) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Relaxation ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Relaxation Resistance ◽  
Temperature Performance ◽  
Very High

Abstract Wieland K-88 is a copper alloy with very high electrical and thermal conductivity, good strength, and excellent stress relaxation resistance at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-738. Producer or source: Wieland Metals Inc.

KUBOTA UCX

Alloy Digest ◽  
2008 ◽  
Vol 57 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance ◽  
High Temperature Operation ◽  
Oxidation And Corrosion ◽  
Very High

Abstract Kubota UCX was developed for very high temperature operation for ethylene pyrolysis service. The alloy also has excellent oxidation and corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting and joining. Filing Code: Ni-663. Producer or source: Kubota Metal Corporation, Fahramet Division.

AIRSTEEL X-200

Alloy Digest ◽  
1959 ◽  
Vol 8 (6) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Very High

Abstract USS AIRSTEEL X-200 is a very high strength, workable, air hardening steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-85. Producer or source: United States Steel Corporation.

DURATECH 30

Alloy Digest ◽  
2006 ◽  
Vol 55 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Very High

Abstract DuraTech 30 is a superhigh-speed steel evolved from the ASTM M3-2 composition, but with added cobalt. The exotic composition offers improved toughness and very high hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance and wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-629. Producer or source: Timken Latrobe Steel.

YSS HAP72

Alloy Digest ◽  
2019 ◽  
Vol 68 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Tool Steel ◽  
High Speed ◽  
High Wear Resistance ◽  
Bend Strength ◽  
Temperature Performance ◽  
Very High

Abstract YSS HAP72 is a powder metallurgy high-speed tool steel with a very high wear resistance. This datasheet provides information on composition, hardness, and bend strength. It also includes information on high temperature performance. Filing Code: TS-779. Producer or source: Hitachi Metals America Ltd.

Use of activated carbon to remove undesirable residual amylase from refinery streams

2017 ◽  
pp. 96-103 ◽  
Author(s):  
Gillian Eggleston ◽  
Isabel Lima ◽  
Emmanuel Sarir ◽  
Jack Thompson ◽  
John Zatlokovicz ◽  
...  
Keyword(s):  
Activated Carbon ◽  
High Temperature ◽  
High Performance ◽  
Activated Carbons ◽  
Amylase Activity ◽  
Sugar Industry ◽  
End User ◽  
Customer Complaints ◽  
Carry Over ◽  
Very High

In recent years, there has been increased world-wide concern over residual (carry-over) activity of mostly high temperature (HT) and very high temperature (VHT) stable amylases in white, refined sugars from refineries to various food and end-user industries. HT and VHT stable amylases were developed for much larger markets than the sugar industry with harsher processing conditions. There is an urgent need in the sugar industry to be able to remove or inactivate residual, active amylases either in factory or refinery streams or both. A survey of refineries that used amylase and had activated carbon systems for decolorizing, revealed they did not have any customer complaints for residual amylase. The use of high performance activated carbons to remove residual amylase activity was investigated using a Phadebas® method created for the sugar industry to measure residual amylase in syrups. Ability to remove residual amylase protein was dependent on the surface area of the powdered activated carbons as well as mixing (retention) time. The activated carbon also had the additional benefit of removing color and insoluble starch.

Sign in / Sign up

Export Citation Format

Share Document