scholarly journals SISTEM PAKAR PENGENALAN EKSPRESI WAJAH MANUSIA MENGGUNAKAN METODE KOHONEN SELF ORGANIZING DAN PRINCIPAL COMPONEN ANALYSIS

Author(s):  
Bagus Hardiansyah ◽  
Puteri Noraisya Primandari

Abstraksistem yang dapat digunakan untuk mengenali ekspresi wajah manusia menggunakan Jaringan Syaraf Tiruan Kohonen SOM sistem tersebut menggunakan metode PCA untuk ekstraksi fitur. Hasil ekstraksi fitur dengan PCA merupakan inisialisasi untuk proses klustering pada jaringan Kohonen SOM. Jaringan Kohonen SOM digunakan untuk membagi pola masukan kedalam beberapa kelompok (cluster). Kohonen SOM dapat mengelompokkan berdasarkan vektor-vektor  dari citra ekspresi wajah, hasil keluaran jaringan Kohonen SOM adalah kelompok yang paling dekat atau mirip dengan masukan yang diberikan. pengenalan ekspresi wajah dilakukan dengan ukuran citra masukan dan  hasilnya  80.00% didapat pada ukuran citra 90x60, dengan jumlah data pengujian 30 citra ekspresi wajah. Kata kunci: Jaringan  Syaraf  Tiruan,  Kohonen  Self  Organizing  Map, Ekspresi wajah. Principal Component Analysis (PCA)

2016 ◽  
Vol 713 ◽  
pp. 107-110 ◽  
Author(s):  
Jhonatan Camacho-Navarro ◽  
Magda Ruiz ◽  
Rodolfo Villamizar ◽  
Luis Mujica ◽  
Oscar Pérez

Pipe leaks detection has a great economic, environmental and safety impact. Although several methods have been developed to solve the leak detection problem, some drawbacks such as continuous monitoring and robustness should be addressed yet. Thus, this paper presents the main results of using a leaks detection and classification methodology, which takes advantage of piezodiagnostics principle. It consists of: i) transmitting/sensing guided waves along the pipe surface by means of piezoelectric device ii) representing statistically the cross-correlated piezoelectric measurements by using Principal Component Analysis iii) identifying leaks by using error indexes computed from a statistical baseline model and iv) verifying the performance of the methodology by using a Self-Organizing Map as visualization tool and considering different leak scenario. In this sense, the methodology was experimentally evaluated in a carbon-steel pipe loop under different leaks scenarios, with several sizes and locations. In addition, the sensitivity of the methodology to temperature, humidity and pressure variations was experimentally validated. Therefore, the effectiveness of the methodology to detect and classify pipe leaks, under varying environmental and operational conditions, was demonstrated. As a result, the combination of piezodiagnostics approach, cross-correlation analysis, principal component analysis, and Self-Organizing Maps, become as promising solution in the field of structural health monitoring and specifically to achieve robust solution for pipe leak detection.


Author(s):  
Junzo Watada ◽  
◽  
Le Yu ◽  
Munenori Shibata ◽  
Marzuki Khalid ◽  
...  

This study is concerned with the development of marketing strategies for mineral water based on consumers’ taste preferences, by analyzing the taste components of mineral water. In this study, we used a twodimensional analysis to classify taste data. We conducted a correlation analysis to identify the characteristics of taste data. We applied a combination of principal component analysis and self-organizing map to classify mineral water tastes. Based on this evaluation, we identified some marketing strategies in the conclusion. According to this study, the taste of mineral water is not determined by the origin and is not influenced by the hardness of the water.


2021 ◽  
Author(s):  
Hocine Bendjama ◽  
Salah BOUHOUCHE ◽  
Salim AOUABDI ◽  
Jürgen BAST

Abstract The monitoring of casting quality is very important to ensure the safe operation of casting processes. In this paper, in order to improve the accurate detection of casting defects, a combined method based on Principal Component Analysis (PCA) and Self-Organizing Map (SOM) is presented. The proposed method reduces the dimensionality of the original data by the projection of the data onto a smaller subspace through PCA. It uses Hotelling’s T2 and Q statistics as essential features for characterizing the process functionality. The SOM is used to improve the separation between casting defects. It computes the metric distances based similarity, using the T2 and Q (T2Q) statistics as input. A comparative study between conventional SOM, SOM with reduced data and SOM with selected features is examined. The proposed method is used to identify the running conditions of the low pressure lost foam casting process. The monitoring results indicate that the SOM based on T2Q as feature vectors remains important comparatively to conventional SOM and SOM based on reduced data.


Sign in / Sign up

Export Citation Format

Share Document