scholarly journals PREDICTION OF PEAK SEISMIC RESPONSE OF ASYMMETRIC BUILDINGS UNDER BI-DIRECTIONAL HORIZONTAL GROUND MOTION USING EQUIVALENT SDOF MODEL AND ITS APPLICABILITY

2014 ◽  
Vol 79 (706) ◽  
pp. 1783-1793
Author(s):  
Kenji FUJII
2016 ◽  
Vol 16 (02) ◽  
pp. 1550066
Author(s):  
Wenhui Wei ◽  
Aoxiong Dai ◽  
Yong-Lin Pi ◽  
Mark Andrew Bradford

This paper presents the shaking table tests and an analytical study of structures with a suspended mass under coupled horizontal and tilting ground motions (CHT) caused by an earthquake. Shaking table tests of a 1:10 scaled model for a converter valve hall with a suspended mass in a high-voltage direct current electric power transmission station are carried out. The equations of motion for the structure, including the influence of the rotary inertia of the suspended mass, are derived. The responses of the model to different ground motions during an earthquake are investigated. It is found that the tilting ground motion plays a significant role in predicting the seismic response of the structure, and it needs to be considered in association with the horizontal ground motion. The response of the structure with a suspended mass to CHT ground motion is much larger than that to horizontal ground motion. The possibility of replacing the steel cables with springs as the suspending components is also investigated, and the spring is shown not to influence the acceleration and displacement responses greatly, but it significantly reduces the tension in the suspending components. Therefore, when a suspended mass is used as a mass-pendulum mitigation system, it is more advantageous to use springs or members having a low axial rigidity as the suspending components. In addition, the effects of the length of the cables and springs on the seismic response of the model with a suspended mass are also explored. It is found that the shorter the cables (or springs), the better the mitigation effects of the suspended mass on the main structure.


2012 ◽  
Vol 256-259 ◽  
pp. 1496-1502 ◽  
Author(s):  
Da Lin Hu ◽  
Tian Qi Qu ◽  
Hong Bin Wang ◽  
Long Gang Chen

There are few researches on seismic response of reinforced concrete rib arch bridges at present; therefore, it is necessary to analyze seismic performance of this kind of bridges. Based on the engineering background of a three-span reinforced concrete rib arch bridge, a full bridge finite element model is built to analyze the structural dynamic characteristic and seismic response of the bridge. The internal forces and displacements of each key section is compared and discussed when the bridge is excited by horizontal unidirectional ground motion or the combination of vertical and horizontal ground motion. The structural seismic response calculated with different analysis methods is compared. The research results of this study can be used as a reference for the seismic design of similar bridges.


2021 ◽  
Vol 21 (2) ◽  
Author(s):  
Piotr Adam Bońkowski ◽  
Juliusz Kuś ◽  
Zbigniew Zembaty

AbstractRecent research in engineering seismology demonstrated that in addition to three translational seismic excitations along x, y and z axes, one should also consider rotational components about these axes when calculating design seismic loads for structures. The objective of this paper is to present the results of a seismic response numerical analysis of a mine tower (also called in the literature a headframe or a pit frame). These structures are used in deep mining on the ground surface to hoist output (e.g. copper ore or coal). The mine towers belong to the tall, slender structures, for which rocking excitations may be important. In the numerical example, a typical steel headframe 64 m high is analysed under two records of simultaneous rocking and horizontal seismic action of an induced mine shock and a natural earthquake. As a result, a complicated interaction of rocking seismic effects with horizontal excitations is observed. The contribution of the rocking component may sometimes reduce the overall seismic response, but in most cases, it substantially increases the seismic response of the analysed headframe. It is concluded that in the analysed case of the 64 m mining tower, the seismic response, including the rocking ground motion effects, may increase up to 31% (for natural earthquake ground motion) or even up to 135% (for mining-induced, rockburst seismic effects). This means that not only in the case of the design of very tall buildings or industrial chimneys but also for specific yet very common structures like mine towers, including the rotational seismic effects may play an important role.


Author(s):  
Ahmad Edris Taha ◽  
Said Elias ◽  
Vasant Matsagar ◽  
Arvind Kumar Jain

2011 ◽  
Vol 16 (3) ◽  
pp. 364-374 ◽  
Author(s):  
Aman M. Mwafy ◽  
Oh-Sung Kwon ◽  
Amr Elnashai ◽  
Youssef M. A. Hashash

Sign in / Sign up

Export Citation Format

Share Document