Dependency of structure, mechanical and electrical properties on rotating magnetic field in the Bi–Sn–Ag ternary eutectic alloy

2016 ◽  
Vol 107 (4) ◽  
pp. 362-371 ◽  
Author(s):  
Hasan Kaya ◽  
Emin Çadırlı ◽  
Mehmet Gündüz ◽  
Dirk Räbiger ◽  
Sven Eckert
Keyword(s):  
Magnetic Field ◽  
Electrical Properties ◽  
Eutectic Alloy ◽  
Ternary Eutectic ◽  
Rotating Magnetic Field ◽  
Mechanical And Electrical Properties ◽  
Ternary Eutectic Alloy

Hot Tearing Behavior in Double Ternary Eutectic Alloy System: Mg-Ce-Al Alloys

2020 ◽  
Vol 51 (12) ◽  
pp. 6658-6669
Author(s):  
Bo Hu ◽  
Dejiang Li ◽  
Jingya Wang ◽  
Zixin Li ◽  
Xueyang Wang ◽  
...  
Keyword(s):  
Eutectic Alloy ◽  
Ternary Eutectic ◽  
Alloy System ◽  
Al Alloys ◽  
Hot Tearing ◽  
Ternary Eutectic Alloy

Casting properties of the high-strength AlZnMgCuNiSi alloys

2003 ◽  
Vol 18 (3) ◽  
pp. 635-641 ◽  
Author(s):  
Dalibor Vojtěch ◽  
Elšad Tagiev ◽  
Čstmír Barta ◽  
Čestmír Barta ◽  
Jan Šerák ◽  
...  
Keyword(s):  
Eutectic Alloy ◽  
Single Phase ◽  
Ternary Eutectic ◽  
High Strength ◽  
Hot Tearing ◽  
Ternary Eutectic Alloy ◽  
Alsi Alloy

In this paper, the improvement of casting properties of the high-strength AlZnMgCu alloys is described. This improvement was achieved by additions of Ni, Mg, and Si, which formed eutectic phases, thus reducing the crystallization interval of the alloy. The comparison of the castability and hot-tearing tendency was made for three alloys: nearly single-phase AlZn6Mg2 alloy, quasi-ternary eutectic AlZn7Mg7Cu1Ni3Si3 alloy, and common casting AlSi10 alloy. It was shown that the castability and hot-tearing tendency of the quasi-ternary eutectic alloy are similar to those of the AlSi alloy.

Phase Stability and Mechanical Behavior of Ternary Bismuth-Lead-Tin Solders

1989 ◽  
Vol 167 ◽  
Author(s):  
W. J. Whealon ◽  
D. S. Stone ◽  
Y. A. Chang
Keyword(s):  
Phase Change ◽  
Eutectic Alloy ◽  
Phase Stability ◽  
Ternary Eutectic ◽  
Tensile Loading ◽  
Stability Study ◽  
Strain Rates ◽  
Ternary Eutectic Alloy ◽  
Property Data ◽  
Bismuth Lead

AbstractResults from a phase stability study of the Bi-Pb-Sn ternary system and mechanical property data from the testing of the Bi-Pb-Sn ternary eutectic alloy are reported. It is found that the mechanical properties of the ternary eutectic alloy change considerably during cooling due to a solid state phase change at 79° C. After solidification, but prior to this phase transformation, the alloy exhibits brittle failure upon tensile loading. After the phase change high ductility is observed, bordering on superplasticity at low strain rates. Furthermore, having gone through the phase change once, the alloy remains ductile even after it is held at temperatures above 79° C. These results are interpreted in terms of the microstructures observed in the alloy.

Sign in / Sign up

Export Citation Format

Share Document