AA 2036

Alloy Digest ◽  
1989 ◽  
Vol 38 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thermal Cycles ◽  
Good Strength ◽  
Sheet Alloy

Abstract AA 2036 was the first modern commercially acceptable aluminum autobody sheet alloy. It has been widely used in outer panel applications. It has moderate strength and formability and good strength after forming when no benefit can be expected from subsequent primer/paint bake thermal cycles. It is not susceptible to Luders or stretcher-strain lines. See also Alcoa 2036 Alloy, Alloy Digest Al-267, May 1986. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-300. Producer or source: Various aluminum companies.

ALCOA 2036 ALLOY

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thermal Cycles ◽  
Good Strength ◽  
Sheet Alloy ◽  
Aluminum Company

Abstract ALCOA 2036 ALLOY was the first modern commercially acceptable aluminum autobody sheet alloy. It has been widely used in outer panel applications. It has moderate strength and formability and good strength after forming when no benefit can be expected from subsequent primer paint bake thermal cycles. It is not susceptible to Luders or stretcher-strain lines. See also AA 2036, Alloy Digest Al-300, October 1989 This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-267. Producer or source: Aluminum Company of America.

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

WIELAND-FX9

Alloy Digest ◽  
2011 ◽  
Vol 60 (8) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Manganese ◽  
Bronze Alloy ◽  
Good Strength

Abstract Wieland-FX9 is a high-manganese bronze alloy that has good strength and is available in numerous cold work tempers related to its minimum tensile strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-801. Producer or source: Wieland Metals Inc..

COPPER ALLOY No. 185

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Copper Alloys ◽  
Circuit Breaker ◽  
Heat Treating ◽  
Age Hardening ◽  
Good Strength

Abstract Copper Alloy No. 185 has fairly high electrical and thermal conductivity in combination with good strength and hardnes. It is an age-hardening type of alloy containing nominally 0.10% silver; it formerly was known as one of the Chromium Copper alloys. Among its many applications are circuit breaker parts, electrode holder jaws, switch contacts and electrical and thermal conductors requiring greater strength than copper. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-390. Producer or source: Copper and copper alloy mills.

BRIDGEPORT 54

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Good Strength ◽  
High Corrosion ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract Bridgeport 54 is a copper-zinc-aluminum alloy having high corrosion and erosion resistance combined with good strength and ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Cu-141. Producer or source: Bridgeport Brass Company.

MAGNESIUM AZ91C

Alloy Digest ◽  
1960 ◽  
Vol 9 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Bearing Strength ◽  
Good Strength ◽  
Temperature Performance ◽  
Metal Products

Abstract MAGNESIUM AZ91C is a general sand casting alloy having good strength, pressure tightness and ductility. It was designed to give optimum properties in both the T4 and T6 tempers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and and bearing strength It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-47. Producer or source: The Dow Metal Products Company.

MST 8Mn

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Sheet Alloy ◽  
Temperature Performance

Abstract MST 8Mn is a heat treatable sheet alloy having good formability and recommended for use at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-17. Producer or source: Mallory-Sharon Titanium Corporation.

NCF 3015 ALLOY

Alloy Digest ◽  
1999 ◽  
Vol 48 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Heat Treating ◽  
Engine Valve ◽  
Good Strength ◽  
Iron Nickel

Abstract NCF 3015 alloy is an iron nickel alloy that is precipitation hardened and has good strength and corrosion resistance to 760 C (1400 F). It is commonly used for engine valve applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and machining. Filing Code: SS-765. Producer or source: Carpenter.

UNS H86170

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Heavy Duty ◽  
Good Strength ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS H-86170 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-435. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document