ALCOA 2026

Alloy Digest ◽  
2006 ◽  
Vol 55 (10) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Selection Criteria ◽  
Damage Tolerance ◽  
Structural Applications ◽  
Extrusion Alloy ◽  
High Degree

Abstract Alcoa extrusion alloy 2026 was developed as an improvement over 2024 and 2224 extrusions in aerospace structural applications where the governing selection criteria are high damage tolerance, good fatigue resistance, and a high degree of manufacturability. In addition to improved damage tolerance, extrusion alloy 2026-T3511 also has a significantly higher A-basis minimum strength than 2024-T3511 and 2224-T3511. This datasheet provides information on composition, tensile properties, and compressive strength as well as fatigue. It also includes information on corrosion resistance as well as forming. Filing Code: AL-401. Producer or source: AEAP-Alcoa Engineered Aerospace Products.

ELEKTRON AZM

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Level ◽  
Extrusion Alloy

Abstract ELEKTRON AZM is a magnesium extrusion alloy having a high strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-45. Producer or source: Magnesium Elektron Ltd.

LUMEN ALLOY 11-C

Alloy Digest ◽  
1955 ◽  
Vol 4 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treatments ◽  
Aluminum Bronze

Abstract LUMEN ALLOY 11-C is a high strength aluminum bronze having good wear and fatigue resistance. It responds to varying heat treatments. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-32. Producer or source: Lumen Bearing Company.

ALCOA 2024 PLATE

Alloy Digest ◽  
2000 ◽  
Vol 49 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Structural Applications

Abstract Alcoa 2024 was introduced by Alcoa in 1931 as the first alloy to have a yield strength approaching 345 MPa (50 ksi). With relatively good fatigue resistance in plate forms, alloy 2024 continues in many aerospace structural applications. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as surface treatment. Filing Code: AL-372. Producer or source: Alcoa Mill Products Inc.

FEDERALOY F-1

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance

Abstract Federaloy F-1 is a copper tin-zinc bearing bronze whose strength suits it for applications where loads are heavy. It should be used only where lubrication is exceptionally good or motion is of a rocking nature. It is also a good gear bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-19. Producer or source: Federal-Mogul Corporation.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

PROMET 6

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Lead

Abstract PROMET 6 is produced in three grades: PROMET 6, PROMET 6 SK and PROMET 6 CR. These alloys comprise a series of high-lead tin bronzes, traditionally known as the bearing bronzes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-218. Producer or source: American Crucible Products Company.

ALCOA 7150-T7751 and T77511

Alloy Digest ◽  
2015 ◽  
Vol 64 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
High Strength ◽  
Static Strength ◽  
Corrosion Resistant ◽  
Overaged Condition

Abstract This producer has pioneered the development of the -T77 temper, a high strength corrosion resistant temper for Alloy 7150 plate and extrusions. Alloy 7150-T77 provides weight savings opportunities in structure governed by static strength requirements but where "overaged" condition corrosion resistance is required. This datasheet provides information on composition, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming. Filing Code: Al-442. Producer or source: Alcoa Mill Products Inc..

DURICHLOR 51M

Alloy Digest ◽  
1996 ◽  
Vol 45 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Hydrochloric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Silicon Iron ◽  
Chlorine Gas ◽  
High Silicon

Abstract Durichlor 51M is a high silicon iron for corrosive services, especially in the handling of hydrochloric acid in all concentrations. It is also very resistant to most chlorine gas and many destructive chloride-containing solutions. The alloy is treated at melting by argon ladle degassing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as machining and joining. Filing Code: FE-109. Producer or source: The Duriron Company Inc.

DURICHLOR 51 SUPERCHLOR

Alloy Digest ◽  
1993 ◽  
Vol 42 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Hydrochloric Acid ◽  
Physical Properties ◽  
Tensile Properties ◽  
Silicon Iron ◽  
Chlorine Gas ◽  
High Silicon

Abstract DURICHLOR 51 SUPERCHLOR is a vacuum treated high silicon iron for corrosive services, especially in the handling of hydrochloric acid in all concentrations. It is also very resistant to most chlorine gas and many destructive chloride-containing solutions. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as machining and joining. Filing Code: FE-98. Producer or source: The Duriron Company Inc.

Sign in / Sign up

Export Citation Format

Share Document