ALCOA 2024 PLATE

Alloy Digest ◽  
2000 ◽  
Vol 49 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Structural Applications

Abstract Alcoa 2024 was introduced by Alcoa in 1931 as the first alloy to have a yield strength approaching 345 MPa (50 ksi). With relatively good fatigue resistance in plate forms, alloy 2024 continues in many aerospace structural applications. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as surface treatment. Filing Code: AL-372. Producer or source: Alcoa Mill Products Inc.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

AWX STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Steel Company

Abstract AWX STEEL is a columbium-bearing low-alloy steel supplied at four yield strength levels where excellent formability and good weldability are required and corrosion resistance is not a great factor. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-269. Producer or source: Alan Wood Steel Company.

MAXI-FORM 50

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Edge Cracking

Abstract MAXI-FORM 50 is a high-strength low-alloy steel developed for applications involving severe bending or moderate draw forming with exceptional freedom from rupture and edge cracking. It is supplied in the 50,000 psi yield-strength range, and also has good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-282. Producer or source: Republic Steel Corporation.

BRUSH WELLMAN I-220

Alloy Digest ◽  
1987 ◽  
Vol 36 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Beryllium Oxide ◽  
Heat Treating ◽  
High Degree ◽  
Ground Powder

Abstract BRUSH WELLMAN I-220 is an instrument grade of beryllium strengthened by a dispersion of 2.2% beryllium oxide maximum. It has a micro-yield strength of 5000 psi minimum. I-220B is manufactured from impact ground powder and therefore is more isotropic than BRUSH WELLMAN S-200E. I-220 is often used as an optical support bench because of its high degree of isotropy and good micro-yield strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Be-7. Producer or source: Brush Wellman Inc..

KAISER ALUMINUM ALLOY 2017

Alloy Digest ◽  
1998 ◽  
Vol 47 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Structural Applications

Abstract Kaiser Aluminum alloy 2017 has good machinability and good mechanical properties. It is used in rivets. General structural applications, and transportation. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-355. Producer or source: Kaiser Aluminum Corporation.

RMI 55

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 55 is a grade of commercially pure unalloyed titanium. It has good ductility and formability with a guaranteed minimum yield strength of 55,000 psi. It has good impact properties at room temperatures and excellent resistance to corrosion by marine atmospheres and seawater. Among its uses are equipment requiring resistance to corrosion and aircraft parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-81. Producer or source: RMI Company.

NIMARK II

Alloy Digest ◽  
1965 ◽  
Vol 14 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NiMark II is a vacuum melted low-carbon alloy steel in which yield strength in excess of 250,000 psi can be developed. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-184. Producer or source: Carpenter.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document