MEEHANITE GD250

Alloy Digest ◽  
2021 ◽  
Vol 70 (5) ◽  
Keyword(s):  
Tensile Strength ◽  
Cast Iron ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Test Pieces ◽  
Temperature Performance ◽  
Iron Grade

Abstract Meehanite GD250 is an intermediate-tensile-strength, pearlitic gray cast iron grade that has a minimum tensile strength of 250 MPa (36 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Owing to its good machinability it is suitable for mass produced parts for automobiles as well as for small hydraulic bodies that must be pressure tight. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-81. Producer or source: Meehanite Metal Corporation.

MEEHANITE GC275

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast ◽  
Strength Grade ◽  
Test Pieces

Abstract Meehanite GC275 is a pearlitic gray cast iron that has a minimum tensile strength of 275 MPa (40 ksi) when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter, test bars. This intermediate-tensile-strength grade has a fine, close-grained structure that is ideal for finishing cuts. It is used for a wide variety of applications on account of its useful combination of good all round properties with adaptability to production of small and large volumes. This datasheet provides information on physical properties, hardness, and tensile properties as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: CI-78. Producer or source: Meehanite Metal Corporation.

MEEHANITE GE200

Alloy Digest ◽  
2021 ◽  
Vol 70 (11) ◽  
Keyword(s):  
Tensile Strength ◽  
Fine Structure ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast ◽  
Test Pieces

Abstract Meehanite GE200 is an intermediate-tensile-strength gray cast iron that has a minimum tensile strength of 200 MPa (29 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. This material is generally used for smaller parts with wall thicknesses above 5 mm (3/16 in.). It has excellent fluidity, no tendency towards hard edges and a uniformly fine structure with small proportions of ferrite and is, therefore, readily machinable. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-87. Producer or source: Meehanite Metal Corporation.

VASCO 9-4-20

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
High Temperature ◽  
Ultimate Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance

Abstract Vasco 9-4-20 (0.20 wt% C) is a premium quality aircraft steel that combines high tensile strength with good fracture toughness. It is a heat-treatable alloy capable of developing an ultimate tensile strength greater than 190 ksi. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: SA-489. Producer or source: Vasco, An Allegheny Teledyne Company.

HYLITE 20

Alloy Digest ◽  
1966 ◽  
Vol 15 (4) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Titanium Aluminum ◽  
Service Conditions

Abstract HYLITE 20 is a titanium-aluminum-tin alloy with properties of medium tensile strength, good weldability and non-embrittlement under service conditions. It is recommended for aircraft and missile components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-47. Producer or source: Jessop-Saville Ltd, Brightside Works.

TIMETAL 6-2-4-2

Alloy Digest ◽  
2007 ◽  
Vol 56 (6) ◽  
Keyword(s):  
Tensile Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Strength ◽  
Temperature Stability ◽  
Heat Treating ◽  
High Temperature Stability ◽  
Temperature Performance

Abstract Timetal 6-2-4-2 has a combination of tensile strength, creep strength, toughness, and high-temperature stability for long-term application at temperatures up to 538 deg C (1000 deg F). This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TI-140. Producer or source: Timet.

MEEHANITE GE225

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Tensile Strength ◽  
Cast Iron ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast ◽  
Damping Capacity ◽  
Lower Strength ◽  
Test Pieces ◽  
Temperature Performance ◽  
Lower Carbon

Abstract Meehanite GE225 is an intermediate-tensile-strength gray cast iron that has a predominantly pearlitic matrix and a minimum tensile strength of 225 MPa (33 ksi), when determined on test pieces machined from separately cast, 30 mm (1.2 in.) diameter test bars. Compared with the lower strength gray cast iron grades, Meehanite GE225 contains lower carbon and silicon contents, while still maintaining excellent thermal conductivity, damping capacity and machinability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: CI-84. Producer or source: Meehanite Metal Corporation.

VASCO 9-4-30

Alloy Digest ◽  
1997 ◽  
Vol 46 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance

Abstract Vasco 9-4-30 (0.30 wt% C) is a premium quality aircraft steel which combines high tensile strength with good fracture toughness. It is a heat treatable alloy capable of developing ultimate tensile strengths greater than 250 ksi. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: SA-491. Producer or source: Vasco, An Allegheny Teledyne Company.

VASCOMAX C-200

Alloy Digest ◽  
2005 ◽  
Vol 54 (7) ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Temperature ◽  
Ultimate Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Maraging Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract VascoMax C-200 is a cobalt-containing maraging steel with cobalt providing the primary strengthening. The number in the alloy name is representative of the ultimate tensile strength expressed in ksi. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SA-547. Producer or source: Allvac, An Allegheny Technologies Company.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NICROFER 5520 Co

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Creep Properties ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

Sign in / Sign up

Export Citation Format

Share Document