BETHLEHEM RQC-90

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Notch Toughness ◽  
Bethlehem Steel Corporation ◽  
Temperature Performance

Abstract BETHLEHEM RQC-90 is a roller quenched and tempered carbon steel with a 90,000 psi yield strength combined with good notch toughness and weldability. It is available in thicknesses through 11/2 inches. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-45. Producer or source: Bethlehem Steel Corporation.

REPUBLIC HP 9-4-20

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Yield ◽  
High Yield Strength ◽  
Temperature Performance

Abstract REPUBLIC HP 9-4-20 is designed especially for applications requiring optimum combinations of relatively high yield strength and toughness with good weldability. This alloy is capable of providing 180,000 psi yield strength in combination with a Charpy V-notch value of 50 ft-lb at 75 F in plate thicknesses up to at least 4 inches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-270. Producer or source: Republic Steel Corporation.

AISI 1050

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-37. Producer or source: Carbon and alloy steel mills.

PYROMET X-15

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Room Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Notch Toughness ◽  
Low Carbon ◽  
Temperature Performance

Abstract PYROMET X-15 is a low-carbon, martensitic alloy which can be age hardened to give high strength with excellent ductility and notch toughness from room temperature to 1050 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-242. Producer or source: Carpenter.

UNITEMP 19-9DL

Alloy Digest ◽  
1975 ◽  
Vol 24 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Notch Toughness ◽  
Nickel Iron ◽  
Temperature Performance

Abstract UNITEMP 19-9 DL is a chromium-nickel iron-base austenitic alloy with high strength at least through 1200 F and good notch toughness. It cannot be hardened by heat treatment but bars and forgings are often warm worked to higher strength levels than those obtainable by annealing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-319. Producer or source: Cyclops.

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

UNITEMP HX

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Base Material ◽  
Heat Treating ◽  
Operating Conditions ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Nickel Base

Abstract Unitemp-HX is a nickel-base material recommended for high temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-91. Producer or source: Universal Cyclops Steel Corporation.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

Sign in / Sign up

Export Citation Format

Share Document