BRUSH ALLOY 190

Alloy Digest ◽  
1968 ◽  
Vol 17 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Copper Strip ◽  
Beryllium Copper ◽  
Heat Treated

Abstract Brush Alloy 190 is a mill-heat treated beryllium copper strip with a tensile strength up to 190,000 psi. It eliminates the need of customer heat-treating by providing high properties combined with exceptional formability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-194. Producer or source: Brush Beryllium Company.

HYLITE 20

Alloy Digest ◽  
1966 ◽  
Vol 15 (4) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Titanium Aluminum ◽  
Service Conditions

Abstract HYLITE 20 is a titanium-aluminum-tin alloy with properties of medium tensile strength, good weldability and non-embrittlement under service conditions. It is recommended for aircraft and missile components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-47. Producer or source: Jessop-Saville Ltd, Brightside Works.

ATI 35N

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treated ◽  
Cold Worked ◽  
Multi Phase ◽  
Very High

Abstract ATI 35N is a wrought, multi-phase Co-Ni-Cr-Mo alloy that can be heat treated to achieve very high strength, while maintaining excellent toughness, ductility, and corrosion resistance. To achieve tensile strength levels of 1795 to 2070 MPa (260 to 300 ksi), the alloy is cold worked and then precipitation hardened. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-133. Producer or source: ATI.

ABEX SPA Alloy

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coal Gasification ◽  
Heat Treating ◽  
Casting Alloy

Abstract ABFX SPA Alloy is a casting alloy that is unsurpassed in an application where no other alloys have ever been successful a combined corrosive and erosive environment typically characterized by fluids with 2.5 to 4.0 pH with abrasives present. This alloy is relatively brittle and after hardening it has a tensile strength of about 95,000 psi and a compressive strength of 360,000 psi. Typical applications are pump parts, mixers and coal-gasification components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-47. Producer or source: Abex Corporation, Engineered Products Division.

ARMCO NI-COP

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Unique Combination ◽  
Heat Treated ◽  
Wide Range

Abstract ARMCO NI-COP is a low-carbon alloy steel that can be furnished in three different heat-treated conditions, each providing different strength and toughness levels. It is suitable for a wide range of applications because of its unique combination of properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-348. Producer or source: Armco Inc., Southwestern Steel Division.

BERYLCO 50

Alloy Digest ◽  
1959 ◽  
Vol 8 (7) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
High Electrical Conductivity ◽  
Beryllium Copper ◽  
Resistance To Wear

Abstract BERYLCO 50 is a beryllium copper alloy offering high electrical conductivity and resistance to wear. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Cu-78. Producer or source: Beryllium Corporation.

DYNA-LOY 41L49

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
Good Surface ◽  
Good Surface Finish

Abstract DYNA-LOY 41L49 is a cold-drawn alloy steel recommended for those applications that require a hardness range of Rockwell C 43 to 56 and excellent machinability. Its chemical composition permits maximum machinability and good surface finish for the tensile strength range 175,000 to 300,000 psi. Its many uses include shafts, pipe reamers and special bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-342. Producer or source: Western Cold Drawn Steel, A Division of Stanadyne.

FERRO-TIC SK

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hot Working ◽  
Heat Treated

Abstract FERRO-TIC SK is a cemented carbide comprising titanium carbide in a matrix of 5% chromium tool steel. It can be heat treated and machined by conventional means and is recommended for cold and hot-working dies and heavy-impact tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-284. Producer or source: Chromalloy Metal Tectonics Company.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document