COPPER ALLOY No. 962

Alloy Digest ◽  
1976 ◽  
Vol 25 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Superior Mechanical Properties ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. 962 is a cast copper-nickel alloy to which about 1.4% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior mechanical properties, weldability and corrosion resistance are needed. It is widely used for such parts as valves and pump bodies that must resist corrosion by seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-319. Producer or source: Copper alloy foundries.

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

ANACONDA ALLOY 706

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Nickel Alloys ◽  
Salt Water ◽  
Heat Treating ◽  
Copper Nickel

Abstract ANACONDA Alloy 706 (also known as Cupro Nickel, 10% 706) is a wrought 90% copper-10% nickel alloy developed to provide a material less costly than the copper-nickel alloys containing 20 or 30% nickel, but yet offering much of their excellent reliability. This was achieved by adding 1.25% iron to Alloy 706 to increase its resistance to corrosion by salt water. Alloy 706 is recommended where good mechanical properties, weldability and corrosion resistance are needed. It is widely used for plates, tubing and piping that must resist seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-391. Producer or source: Anaconda American Brass Company.

REVERE No. 508

Alloy Digest ◽  
1959 ◽  
Vol 8 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Feed Water ◽  
Water Heater ◽  
Corrosion Resistant ◽  
Copper Nickel Alloy

Abstract Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

COPPER ALLOY No. C72600

Alloy Digest ◽  
1991 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Cold Work ◽  
Heat Treating ◽  
Resistance Welding ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. C72600 is a wrought copper-nickel alloy. It has excellent capacity for cold work and may be readily joined by soldering, brazing, arc and resistance welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-563. Producer or source: Copper and copper alloy mills.

MONEL ALLOY 401

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Heat Treating ◽  
High Electrical Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract MONEL alloy 401 is a copper-nickel alloy with high electrical resistance and is used primarily in specialized electrical and electronic applications. It has a negligible temperature coefficient of electrical resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-216. Producer or source: Huntington Alloy Products Division.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

COPPER ALLOY No. 675

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract COPPER ALLOY No. 675 is a copper-zinc alloy having excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-244. Producer or source: Brass mills.

DRIVER 180 ALLOY

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract DRIVER 180 ALLOY is a copper-nickel alloy for use where moderate electrical resistance is required. The number designation refers to its specific resistivity (180 ohms/cir mil/ft) which is combined with a fairly low coefficient of resistance (180 x 10^-6 per C). Its maximum recommended operating temperature is 1000 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-348. Producer or source: Wilbur B. Driver Company.

OLIN ALLOY C72200

Alloy Digest ◽  
2006 ◽  
Vol 55 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Olin Alloy C72200 is a chromium-containing copper-nickel alloy used extensively in seawater. The alloy is used for its corrosion-erosion resistance and is often called Cupronickel with Cr. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-745. Producer or source: Olin Brass.

COPPER ALLOY No. 485

Alloy Digest ◽  
1972 ◽  
Vol 21 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Copper Zinc ◽  
Mechanical Properties And Corrosion

Abstract COPPER ALLOY No. 485 is a free-cutting copper-zinc alloy having good mechanical properties and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-249. Producer or source: Brass mills.

Sign in / Sign up

Export Citation Format

Share Document