BELMONT ALLOY 4582

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Special Needs ◽  
Tensile Properties ◽  
Base Metal ◽  
Heat Treating ◽  
Metal Alloy ◽  
Base Metal Alloy

Abstract BELMONT Alloy 4582 is a alloy developed to meet the special needs of jewelers for a base-metal alloy suitable for casting centrifugally in refractory molds. It can be joined readily to itself and other alloys by soldering or brazing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-353. Producer or source: Belmont Metals Inc..

UCI-190

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Metal ◽  
Creep Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Steam Cracking

Abstract UCI-190 (HP) material is a general-purpose alloy for use in steam-cracking tubes and fittings and reformer furnaces. HP alloy has carburization, oxidation, and creep resistance at temperatures up to 2000 F. The alloy is weldable by GTAW, GMAW, and SMAW using electrodes with composition matching the base metal (25Cr-35Ni) or NiCrCoMo-1 (AWS 5.11 and AWS 5.14). Preheat or post heat normally are not required. UCI-190 has been used for many years providing consistent and predictable results in high-temperature applications. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-689. Producer or source: Ultra-Cast Inc.

PEWTER

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Metal Alloy ◽  
White Metal

Abstract PEWTER is an alloy of tin, antimony and copper. It is used for various household, decorator and office items because of its pleasing appearance. One version of PEWTER is Brittania Metal which contains 90-92% tin. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Sn-4. Producer or source: White metal alloy producers.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

UNS C36000

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Heat Treating ◽  
Screw Machine ◽  
Trade Names ◽  
Machine Work

Abstract UNS NO. C36000 is a leaded brass suitable for high-speed screw-machine work. It has many uses such as hardware, gears and pinions. Its trade names include free-turning brass, free-cutting yellow brass and high-leaded brass. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-536. Producer or source: Brass mills.

COPPER ALLOY No. 411

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition

Abstract Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

OM-METAL

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Water System ◽  
Heat Treating ◽  
Brass Alloy ◽  
Corrosion Resistant

Abstract OM-METAL is a new, corrosion-resistant brass alloy. It has excellent resistance to dezincification which makes it highly suitable for water-system applications, decorative parts and marine fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-279. Producer or source: American Smelting and Refining Company.

Sign in / Sign up

Export Citation Format

Share Document