ANSONIA ALLOY C15000

Alloy Digest ◽  
2011 ◽  
Vol 60 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Zirconium Copper ◽  
Zr Alloy

Abstract Ansonia alloy C15000 is a 0.15% Zr alloy and is often called zirconium copper. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-798. Producer or source: Ansonia Copper & Brass Inc..

ALCAN 2027 T3511

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cross Sections ◽  
Damage Tolerance ◽  
Heat Treating ◽  
2024 Alloy ◽  
Zr Alloy

Abstract Alcan 2027 is an Al-Cu-Mg-Mn-Zr alloy, developed to provide higher strength and damage tolerance than the incumbent 2024 alloy. Alcan 2027 T3511 possesses good damage tolerance. This datasheet covers Alcan 2027 T3511 in both thin and the heavier cross sections. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-424. Producer or source: Alcan Inc.

ALCAN 7040-T7651

Alloy Digest ◽  
2008 ◽  
Vol 57 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aerospace Structures ◽  
Zr Alloy

Abstract Alcan 7040 is an Al-Mg-Zn-Cu-Zr alloy, developed to provide an improved strength-toughness balance versus incumbent 7010 and 7050 alloys. This datasheet covers Alcan 7040 alloy in T7651 temper. The alloy is used in aerospace structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-418. Producer or source: Alcan Inc.

COPPER ALLOY No. C15100

Alloy Digest ◽  
1994 ◽  
Vol 43 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Frame ◽  
Zirconium Copper ◽  
Copper Lead

Abstract Copper Alloy No. C15100 is an age-hardenable zirconium-copper lead frame alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-552. Producer or source: Copper and copper alloy mills. Originally published April 1990, revised October 1994.

COPPER No. C15000

Alloy Digest ◽  
1990 ◽  
Vol 39 (3) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treated ◽  
Zirconium Copper

Abstract Zirconium Copper is an age hardenable electrical conductivity alloy which develops high strength when heat treated. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-551. Producer or source: Copper and copper alloy mills.

ALCAN 2297-T87

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Damage Tolerance ◽  
Heat Treating ◽  
Equivalent Strength ◽  
Zr Alloy

Abstract Alcan 2297-T87 is an Al-Cu-Li-Mn-Zr alloy, developed to provide improved fatigue and damage tolerance with equivalent strength and corrosion resistance compared with incumbent alloy 2124-T851. The alloy possesses fatigue strength 3 to 5 times that of other aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-415. Producer or source: Alcan Inc.

ALCAN 7449 T6511, T79511

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Strength Properties ◽  
Data Sheet ◽  
Bearing Strength ◽  
Zr Alloy

Abstract Alcan 7449 is an Al-Mg-Zn-Cu-Zr alloy, developed to provide higher-strength properties than incumbent 7175 and 7150 alloys. This data sheet covers the Alcan alloy 7449 in the forms of thick extrusions and extruded bars. Tempers are presented that show improvement over both 7150 and 7175 aluminum alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-403. Producer or source: Alcan Inc.

OLIN C151

Alloy Digest ◽  
1999 ◽  
Vol 48 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Lead Frame ◽  
Zirconium Copper ◽  
Copper Lead

Abstract Olin C151 is an age-hardenable dispersion strengthened zirconium-copper lead frame alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CU-632. Producer or source: Olin Brass.

ALCAN 7056-T7951

Alloy Digest ◽  
2008 ◽  
Vol 57 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Data Sheet ◽  
High Toughness ◽  
Very High ◽  
Zr Alloy

Abstract Alcan 7056 is an Al-Mg-Zn-Cu-Zr alloy developed to provide an improved static/toughness balance versus incumbent 7150 and 7449 alloys. This data sheet covers Alcan 7056 alloy in the overaged T7951 temper. The alloy possesses very high toughness with improved corrosion resistance over 7150. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: AL-416. Producer or source: Alcan Inc.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NILOMAG 77

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Initial Permeability ◽  
Magnetic Alloy ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
High Level

Abstract NILOMAG ALLOY 77 is a 77 Ni soft magnetic alloy with a high level of initial permeability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-488. Producer or source: Inco Alloys International Inc.

Sign in / Sign up

Export Citation Format

Share Document