CARPENTER LOW EXPANSION 45

Alloy Digest ◽  
2004 ◽  
Vol 53 (12) ◽  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Constant Rate ◽  
Nickel Iron Alloy

Abstract Carpenter Low-Expansion 45 alloy is a 45% nickel-iron alloy with a constant rate of thermal expansion useful in thermostats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: FE-134. Producer or source: Carpenter.

NILO ALLOY 42

Alloy Digest ◽  
1987 ◽  
Vol 36 (6) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Expansion Coefficient ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Nickel Iron Alloy

Abstract NILO Alloy 42 is a binary nickel-iron alloy having a low and nominally constant expansion coefficient over the range 20-300 C (68-572 F). It is used for semiconductor lead frames, thermostats and glass-to-metal seals. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: Fe-77. Producer or source: Inco Alloys International Inc..

INVAR

Alloy Digest ◽  
1964 ◽  
Vol 13 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Temperature Performance ◽  
Nickel Iron Alloy

Abstract INVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-24. Producer or source: Carpenter.

CARPENTER INVAR 36 ALLOY

Alloy Digest ◽  
2004 ◽  
Vol 53 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Iron Alloy

Abstract Carpenter Invar 36 alloy is a 36% nickel-iron alloy with a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 204 deg C (400 deg F). This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on low and high temperature performance. Filing Code: FE-131. Producer or source: Carpenter Technology Corporation.

UNISEAL 52

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract UNISEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher-than-normal thermal expansion glasses such as Types O120 and 9010. It is used in hermetically-sealed magnetic dry reed switches, compression seals, and ceramic seals where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-156. Producer or source: Cyclops Corporation.

TECHALLOY GLASSEAL 52

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract TECHALLOY GLASSEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher than normal thermal-expansion glasses such as Types 0120 and 9010, and certain ceramics. It has relatively good mechanical properties: a tensile strength of 80,000 psi and an elongation of 35%. It is used in a number of applications where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-260. Producer or source: Techalloy Company Inc..

BALCO

Alloy Digest ◽  
1962 ◽  
Vol 11 (4) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Resistance Thermometers ◽  
Nickel Iron Alloy

Abstract BALCO is a nickel-iron alloy recommended for applications operating in air at 1100 deg. F. It is used in electrical instruments and controls such as resistance thermometers and ballistic devices. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance. Filing Code: Ni-71. Producer or source: Wilbur B. Driver Company.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

RED X-20

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Aluminum Silicon Alloy ◽  
Temperature Performance

Abstract RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

CARPENTER LOW EXPANSION 39

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Thermal Expansion ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Nickel Iron ◽  
Temperature Ranges ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Iron Alloy ◽  
Low Rate

Abstract Carpenter Low Expansion 39 alloy is a 39% nickel iron alloy with a low rate of thermal expansion useful to temperature ranges up to 316 deg C (600 deg F). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on joining. Filing Code: FE-132. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document