CARPENTER 80-20 ALLOY

Alloy Digest ◽  
1980 ◽  
Vol 29 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Aircraft Engine ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Engine Exhaust ◽  
Good Corrosion Resistance ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Exhaust Valves

Abstract CARPENTER 80-20 ALLOY is a nickel-chromium alloy intended for service at high temperatures. It offers good corrosion resistance to exhaust gases in aircraft piston engines. Considerable quantities of this alloy have been used as welded overlays on valve heads for aircraft engine exhaust valves. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-264. Producer or source: Carpenter.

ALLEGHENY A-286

Alloy Digest ◽  
1966 ◽  
Vol 15 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel

Abstract ALLEGHENY A-286 is an austenitic iron-nickel-chromium alloy designed for service up to 1300 F where high strength and corrosion resistance are required, and for service at higher temperatures where the applications are for lower stresses. It is an age-hardenable alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-4. Producer or source: Allegheny Ludlum Corporation. Originally published December 1952, revised September 1966.

HOSKINS 502

Alloy Digest ◽  
1959 ◽  
Vol 8 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
High Nickel ◽  
Corrosion And Oxidation ◽  
Resistance To Heat

Abstract HOSKINS 502 is an austenitic, non-magnetic, high nickel-chromium alloy steel recommended for use on mechanical applications requiring high resistance to heat, corrosion and oxidation. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-89. Producer or source: Hoskins Manufacturing Company.

INCONEL ALLOY 603XL

Alloy Digest ◽  
2004 ◽  
Vol 53 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Chromium Alloy ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract Inconel alloy 603XL is a nickel-chromium alloy with added elements of silicon, molybdenum, and rare earths to provide oxidation resistance and good high temperature strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: Ni-619. Producer or source: Special Metals Corporation.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

NUCALLOY 45

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Commercial Applications

Abstract NUCALLOY 45 is a nickel-chromium-boron alloy which derives superior wear resistance from the presence of hard nickel borides (and to a lesser extent chromium carbides) tightly held in a nickel-rich matrix. It is used in many commercial applications because of its toughness and high resistance to attack by many chemicals. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-238. Producer or source: Stoody Company.

INCONEL ALLOY 671

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Chromium Alloy ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract INCONEL ALLOY 671 is a nickel-chromium alloy having excellent resistance to high-temperature corrosion. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-180. Producer or source: Huntington Alloy Products Division, An INCO Company.

NIROSTA 4465

Alloy Digest ◽  
2000 ◽  
Vol 49 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Intergranular Corrosion ◽  
Phosphate Rock ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance

Abstract Nirosta 4465 is a low-carbon, high-chromium alloy with nickel and molybdenum. It has good corrosion and intergranular corrosion resistance. The alloy is used for processing phosphate rock. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-797. Producer or source: ThyssenKrupp Nirosta.

CARPENTER SIL No. 1

Alloy Digest ◽  
1963 ◽  
Vol 12 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Internal Combustion Engines ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Combustion Engines ◽  
Temperature Performance

Abstract Carpenter SIL No. 1 is a hardenable silicon-chromium alloy steel that is used in applications where the operating temperatures are below 1000 F. It is widely used for intake valves and for exhaust valve stems in internal combustion engines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-152. Producer or source: Carpenter.

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

CARPENTER AMS 5700

Alloy Digest ◽  
1975 ◽  
Vol 24 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Valve Steel ◽  
Carpenter Technology Corporation ◽  
Exhaust Valves ◽  
Nickel Tungsten

Abstract CARPENTER AMS 5700 is an austenitic chromium-nickel-tungsten valve steel which offers good high-temperature properties and resistance to corrosion in exhaust valves. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-313. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document