UCI-471

Alloy Digest ◽  
2001 ◽  
Vol 50 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Temperature Performance ◽  
Furnace Tube

Abstract UCI-471 is an improved version of the HP classification of furnace tube alloys with better oxidation and creep resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-562. Producer or source: Ultra-Cast Inc.

UCI-472

Alloy Digest ◽  
2001 ◽  
Vol 50 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
Temperature Performance ◽  
Furnace Tube

Abstract UCI-472 is an improved version of the well-known HP classification of furnace-tube alloys with improved carburization and oxidation resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-566. Producer or source: Ultra-Cast Inc.

UCI-190

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Metal ◽  
Creep Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Steam Cracking

Abstract UCI-190 (HP) material is a general-purpose alloy for use in steam-cracking tubes and fittings and reformer furnaces. HP alloy has carburization, oxidation, and creep resistance at temperatures up to 2000 F. The alloy is weldable by GTAW, GMAW, and SMAW using electrodes with composition matching the base metal (25Cr-35Ni) or NiCrCoMo-1 (AWS 5.11 and AWS 5.14). Preheat or post heat normally are not required. UCI-190 has been used for many years providing consistent and predictable results in high-temperature applications. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-689. Producer or source: Ultra-Cast Inc.

Ti-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Good Combination ◽  
Surface Stability ◽  
Temperature Performance

Abstract Ti-11 is a super alpha litanium alloy with excellent properties up to at least 1000 F; it has useful properties as high as 1100 F. It offers a good combination of creep resistance and metallurgical and surface stability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-69. Producer or source: Titanium Metals Corporation of America.

URANUS 800 HT

Alloy Digest ◽  
1996 ◽  
Vol 45 (10) ◽  
Keyword(s):  
Grain Size ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Sigma Phase ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract Uranus 800 HT is a variant of a high chromium and nickel austenitic alloy that combines good corrosion and creep resistance. The alloy is solution annealed to produce a large grain size and remains stable, not being embrittled by the precipitation of sigma phase. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-655. Producer or source: Creusot-Marrel.

ELEKTRON ZREO

Alloy Digest ◽  
1955 ◽  
Vol 4 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Medium Strength

Abstract ELEKTRON ZREO is a medium strength magnesium base casting alloy of very similar creep resistance to Elektron ZRE1 It possesses optimum corrosion resistance in marine type exposure environments with freedom from sporadic deep pitting combined with good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-18. Producer or source: Aluminium Laboratories Ltd.

UCI-198

Alloy Digest ◽  
1999 ◽  
Vol 48 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Rare Earth ◽  
High Temperature ◽  
Rare Earth Elements ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Temperature Performance ◽  
Furnace Tube

Abstract UCI-198 is best described as an HP alloy modified with niobium and with microalloying by titanium and rare-earth elements. The alloy was developed to produce increased creep resistance in furnace tube applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: SS-770. Producer or source: Ultra-Cast Inc.

SIRIUS S12

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Heat Treating ◽  
Temperature Performance

Abstract Sirius S12 is an austenitic stainless steel for high-temperature service. The carbon content is optimized for creep resistance, and the alloy contains additions of silicon to outperform the conventional grades in oxidation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-910. Producer or source: Industeel USA, LLC.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document