VDM NICKEL 200

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Chemical Processing ◽  
Nickel 200 ◽  
Nickel Grade

Abstract VDM Nickel 200 is an unalloyed nickel grade that contains at least 99.2% nickel. It has characteristics that are useful in several fields, notably chemical processing and electronics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-778. Producer or source: VDM Metals GmbH (a subsidiary of Acerinox, S.A.).

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

ZIRCADYNE 706

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Chemical Compositions ◽  
Chemical Processing ◽  
Lower Oxygen ◽  
Panel Type

Abstract ZIRCADYNE 706 is a zirconium-niobium (columbium) alloy containing 2-3% niobium. It is similar in chemical compositions (except for slightly lower oxygen) to Zircadyne 705 (Alloy Digest Zr-8, July 1982). Zircadyne 706 was developed specifically for severe forming applications such as panel-type heat exchangers. The corrosion resistance of Zircadyne 706 is identical to that of Zircadyne 705 but its tensile and yield strengths are slightly lower. It is recommended for chemical processing applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-10. Producer or source: Teledyne Wah Chang Albany.

NICKEL 200

Alloy Digest ◽  
1962 ◽  
Vol 11 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel 200

Abstract Nickel-200 is a wrought metal combining excellent mechanical properties with corrosion resistance. It retains its strength to an excellent degree at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-75. Producer or source: Huntington Alloy Products Division.

CARPENTER NICKEL 211 ALLOY

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Pure Nickel ◽  
Manganese Alloy ◽  
Commercially Pure ◽  
Nickel 200 ◽  
Nickel Manganese

Abstract CARPENTER NICKEL 211 ALLOY is a nickel-manganese alloy that is slightly harder than commercially pure nickel (Nickel 200). It is a solid-solution strengthened alloy. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-361. Producer or source: Carpenter.

INCO ALLOY C-276

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pollution Control ◽  
Waste Treatment ◽  
Heat Treating ◽  
Pulp And Paper ◽  
Tungsten Alloy ◽  
Chemical Processing ◽  
Inco Alloy

Abstract INCO Alloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with outstanding corrosion resistance that is maintained even in the welded condition. It also has excellent resistance to oxidizing media. It is widely used in the severest environments encountered in chemical processing, pollution control, industrial and municipal waste treatment, pulp and paper production, and other fields. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-311. Producer or source: Huntington Alloys.

ATI CP GRADE 16 TITANIUM

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Chemical Processing ◽  
Commercially Pure ◽  
Excellent Corrosion Resistance ◽  
Continuous Service ◽  
The Media ◽  
Titanium Grade

Abstract ATI CP Grade 16 Titanium is an unalloyed titanium grade that contains 0.04–0.08% Pd. This Pd-containing alloy extends the range of application of commercially pure (CP) titanium in HCl, H3PO4, and H2SO4 solutions. ATI CP Grade 16 Titanium is used in applications requiring excellent corrosion resistance in chemical processing or in storage applications where the media is mildly reducing or fluctuates between oxidizing and reducing. It can be used in continuous service up to 425 °C (795 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-182. Producer or source: ATI.

NICKEL 201

Alloy Digest ◽  
1968 ◽  
Vol 17 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Nickel 200 ◽  
Nickel 201

Abstract NICKEL 201 is a low carbon version of Nickel 200 recommended for use in the electronic industries for service at temperatures between 600 F and 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-139. Producer or source: Huntington Alloy Products Division.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document