AISI 4815

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Low Temperature Toughness

Abstract AISI 4815 is a low-carbon, nickel-molybdenum carburizing steel. It is recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It also offers a good combination of strength and low-temperature toughness for non-carburizing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-259. Producer or source: Alloy steel mills and foundries.

AISI 4820

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Low Carbon ◽  
Steel Mills ◽  
Low Temperature Toughness

Abstract AISI 4820 is a low-carbon carburizing steel containing nominally 3.5% nickel and 0.25% molybdenum. It is ideal for uses that require a strong, tough core along with a highly wear-resistant carburized case. In addition, it offers a good combination of strength and low-temperature toughness for non-carburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-311. Producer or source: Alloy steel mills and foundries.

SAE 4820

Alloy Digest ◽  
1985 ◽  
Vol 34 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Heat Treating ◽  
Good Combination ◽  
Low Carbon ◽  
Heavy Duty ◽  
Steel Mills ◽  
Wide Range ◽  
Low Temperature Toughness

Abstract SAE 4820 is a low-carbon (nominally 0.20%) carburizing steel containing nominally 3.5% nickel and 0.25% molybdenum. It is deal for used that require a strong, tough core along with a highly wear-resistant carburized case. In addition, it offers a good combination of strength and low-temperature toughness for non-carburized applications. It is recommended for a wide range of moderately heavy-duty applications. Among its many uses are carburized gears, carburized aerospace components and non-carburized machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-409. Producer or source: Alloy steel mills and foundries.

NICLOY 5

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NICLOY 5 is a low carbon, nickel ferritic steel reecommended for low temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-96. Producer or source: Babcock & Wilcox Company.

AISI 4615

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Toughness ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 4615 is a low-carbon, nickel-molybdenum alloy steel of the carburizing grade, recommended for applications where high toughness and excellent wear resistance are required. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-112. Producer or source: Alloy steel mills and foundries.

UDDEHOLM STAINLESS 24 and 24L

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Chemical Industry ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Wide Usage

Abstract UDDEHOLM Stainless 24 and 24L are essentially similar except for the extra-low carbon content of 24L for use where forming and welding result in relatively long heating within the range 930-1650 F (500-900 C). They are acid-resistant, non-hardenable and nonmagnetic steels. Their wide usage includes process vessels and containers in the chemical industry, steam superheaters and pickling vats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-350. Producer or source: Uddeholm Aktiebolag.

AISI 1010

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Temperature ◽  
Physical Properties ◽  
Deep Drawing ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 1010 is a low-carbon steel having good formability and weldability. It is recommended for sheet stock for deep-drawing operations and in sheet and stock for structural shapes and carburized parts. Among its many applications are bushings, clutch discs, flanges, thrust washers, tinplate, nails, rivets, automobile bodies and fenders, pans and transmission covers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-106. Producer or source: Carbon steel mills.

IMPACTO

Alloy Digest ◽  
1959 ◽  
Vol 8 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
High Toughness ◽  
Temperature Performance

Abstract IMPACTO is a low-carbon, nickel-molybdenum alloy steel of the carburizing grade, recommended for applications where high toughness and excellent wear resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-88. Producer or source: Atlas Steels Company.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

AMPCOLOY 495

Alloy Digest ◽  
1966 ◽  
Vol 15 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
High Manganese ◽  
Temperature Performance

Abstract AMPCOLOY 495 is a high manganese type of aluminum bronze recommended where high strength and corrosion resistance are required along with good weldability. It is recommended for marine equipment and ship propellers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-171. Producer or source: Ampco Metal Inc..

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

Sign in / Sign up

Export Citation Format

Share Document