UNIFLUX VCM 125

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Weld Metal ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Electrode Wire ◽  
Molybdenum Steel ◽  
Alloy Steels ◽  
Welding Electrode

Abstract UNIFLUX VCM 125 is a continuous flux-cored welding electrode (wire) that is used to deposit 1 1/4% chromium-1/2% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 100% carbon dioxide. This electrode also may be used to weld other low-alloy steels and carbon steels; however, the weld metal may differ somewhat from 1 1/4% chromium-1/2% molybdenum because of weld-metal dilution. When Uniflux VCM 125 is used to weld 1 1/4% chromium-1/2% molybdenum steel, it provides 95,000 psi tensile strength at 70 F and 24 foot-pounds Charpy V-notch impact at 40 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-340. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX V100

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Weld Metal ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Steel Weld ◽  
Electrode Wire ◽  
Steel Weld Metal ◽  
Molybdenum Steel ◽  
Alloy Steels ◽  
Welding Electrode

Abstract UNIFLUX V100 is a continuous flux-cored welding electrode (wire) that is used to deposit 1/2% molybdenum steel weld metal when used to weld 1/2% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 75% argon-25% carbon dioxide. This electrode is also used to weld other low-alloy steels and carbon steels; however, the weld metal may differ somewhat from 1/2% molybdenum because of weld-metal dilution. Uniflux V100 is used widely in shipbuilding to weld 1/2% molybdenum steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-339. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX V90

Alloy Digest ◽  
1979 ◽  
Vol 28 (2) ◽  
Keyword(s):  
Carbon Dioxide ◽  
High Strength ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Nickel Steel ◽  
Steel Weld Metal ◽  
Alloy Steels ◽  
Temperature Impact ◽  
Welding Electrode

Abstract UNIFLUX V90 is a continuous flux-cored welding electrode (wire) developed to weld high-strength low-alloy steels, but it may be used to weld other low-alloy steels and carbon steels. It is used to deposit typically 2.40% nickel steel weld metal with good low-temperature impact properties. Welding is protected by a shielding atmosphere of either 75% argon-25% carbon dioxide or 100% carbon dioxide. Uniflux V90 is used widely in shipbuilding and other fabricating industries. It provides around 88,000 psi tensile strength and around 26 food-pounds Charpy V-notch impact at 60 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-355. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX VCM 225

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Weld ◽  
Electrode Wire ◽  
Molybdenum Steel ◽  
Welding Electrode

Abstract UNIFLUX VCM 225 is a continuous flux-cored welding electrode (wire) that is used to deposit 2-1/4% chromium-1% molybdenum steel weld when used to weld 2-1/4% chromium-1% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 100% carbon dioxide. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-344. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX 70

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
Shielding Gas ◽  
Electrode Wire ◽  
Welding Electrode

Abstract UNIFLUX 70 is a continuous flux-cored welding electrode (wire) for welding in carbon dioxide shielding gas in the flat groove and horizontal fillet positions. It is used widely in shipbuilding and other fabricating industries to weld carbon steel and provides around 82,000 psi tensile strength and around 50 foot-pounds Charpy V-notch impact at 0 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-74. Producer or source: Unicore Inc., United Nuclear Corporation.

TRI-MARK TM-115

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Arc Welding ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steels ◽  
Mining Equipment ◽  
Alloy Steels ◽  
Temperature Impact ◽  
Welding Electrode

Abstract TRI-MARK TM-115 is a gas-shielded flux-cored welding electrode for continuous high deposition are welding. It is designed specifically for semiautomatic and automatic arc welding of high-strength low-alloy steels and quenched-and-tempered steels. This gas-sheilded tubular wire can be used for single and multiple-pass welding. It has outstanding low-temperature impact properties. Its applications including mining equipment, large vehicles and similar items. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-392. Producer or source: Tri-Mark Inc..

UNIFLUX 90

Alloy Digest ◽  
1979 ◽  
Vol 28 (7) ◽  
Keyword(s):  
Low Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Nickel Steel ◽  
Steel Weld Metal ◽  
Alloy Steels ◽  
Temperature Impact ◽  
Welding Electrode

Abstract UNIFLUX 90 is a continuous flux-cored welding electrode (wire) for welding in carbon dioxide shielding gas in the flat groove and horizontal fillet positions. It was developed to weld high-strength low-alloy steels, but it can be used successfully to weld other low-alloy steels and carbon steels. It is used to deposit typically 2.40% nickel steel weld metal with good low-temperature impact properties. Uniflux 90 is used widely in shipbuilding and other fabricating industries. It provides around 85,000 psi tensile strength and around 25 foot-pounds Charpy V-notch impact at -60 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-362. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX V70

Alloy Digest ◽  
1978 ◽  
Vol 27 (6) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Carbon Steel ◽  
Heat Treating ◽  
Steel Weld ◽  
Electrode Wire ◽  
Steel Weld Metal ◽  
Welding Electrode ◽  
Metal Welding

Abstract Uniflux V70 is a continuous flux-cored welding electrode (wire) that is used to deposit carbon steel weld metal. Welding is protected by a shielding atmosphere of either 75% argon-25% carbon dioxide or 100% carbon dioxide. Uniflux V70 is used widely in shipbuilding and other fabricating industries to weld carbon steel and provides around 85,000 psi tensile strength and around 37 foot pounds Charpy V-notch impact at 0 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-73. Producer or source: Unicore Inc., United Nuclear Corporation.

TRI-MARK TM-811N2

Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  
Keyword(s):  
Low Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steels ◽  
Nickel Steel ◽  
Fine Grained ◽  
Subzero Temperatures ◽  
Steel Weld Metal ◽  
Alloy Steels ◽  
Welding Electrode

Abstract TRI-MARK TM-811N2 is a flux-cored welding electrode for all position semiautomatic arc welding. It is designed to weld 2-3% nickel steels for applications requiring good toughness at subzero temperatures; in addition, it is used to weld various other high-strength low-alloy steels and various fine-grained steels with low-temperature toughness. Tri-Mark TM-811N2 is used to deposit typically 2.35% nickel steel weld metal with good low-temperature impact properties. It is used for shipbuilding, oil rigs and similar structures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-389. Producer or source: Tri-Mark Inc..

INCONEL FILLER METAL 625

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
Filler Metal ◽  
High Strength ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Alloy 800H ◽  
Dissimilar Joints ◽  
Gas Tungsten Arc ◽  
Inconel Alloys ◽  
Alloy Steels

Abstract INCONEL Filler Metal 625 is used for gas-metal-arc and gas-tungsten-arc welding of INCONEL alloys 625 and 601 and INCOLOY alloy 800H. It is also used for surfacing of steel, for welding nickel steels, and for welding various corrosion-resistant alloys such as INCO Alloys G and 904L. It has high strength and exceptional resistance to corrosion. Filler metal 625 is useful for many dissimilar joints involving INCONEL and INCOLOY alloys, carbon steels, low-alloy steels and stainless steels. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-327. Producer or source: Inco Alloys International Inc..

CYCLOPS L2

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Low Alloy Steels ◽  
Good Resistance ◽  
Alloy Steels ◽  
Hardened Condition

Abstract CYCLOPS L2 is the tool steel counterpart of one of the widely used chromium-vanadium low-alloy steels. It exhibits exceptional strength, toughness and resistance to fatigue; it may be used where these characteristics are more important than extreme hardness. Cyclops L2 has only modest hardenability but it has good resistance to abrasion and wear in the hardened condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-325. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document